INNOmount Fixed Base for Sauer 404

• Rifle-specific fit: This fixed base is made for the Sauer 404 platform and also fits the Sauer 303 (SUM) and Sauer SUM mount interface, giving a secure starting point for a correctly matched optic setup.
• Low 11.00 mm build height: The compact height helps keep the optic close to the bore, which supports a more natural cheek weld and a more stable shooting position in the field.
• Aluminium construction: The aluminium body keeps weight down while still providing the rigidity needed for a dependable optic mounting base on a hunting rifle.
• Fixed mounting design: A fixed base prioritises a solid, non-quick-detach connection, making it a practical choice for rifles that carry one dedicated optic and are expected to hold their setup consistently.
• 0 MOA inclination: The neutral base angle suits general hunting and everyday sporting use, keeping the mounting geometry straightforward for standard zeroing distances.

About the INNOmount Spare Parts Series

The INNOmount Spare Parts series reflects the brand’s practical approach to rifle mounting components and replacement parts. In the 2018 INNOMOUNT catalog, spare parts for ring mounts were introduced as a new part of the range, showing that the series is intended not only for complete mount systems but also for maintaining or adapting an existing setup. Across the wider INNOMOUNT family, the focus is on attaching aiming devices to rifles with a design philosophy built around fast handling, low overall height and a clean mechanical fit.

Within that context, the spare-parts line supports the same broad platform coverage seen across the brand’s mounts, including solutions for Weaver/Picatinny, Blaser, Sauer, Tikka and other rifle systems. The series is associated with aluminium construction in retailer technical listings, which suits the brand’s preference for keeping mounts light without making them bulky. Height options and variant differences within the spare-parts range also show that the series is meant to help shooters fine-tune optic position rather than replace a mount with a one-size-fits-all solution.

About the INNOmount Fixed Base for Sauer 404

The INNOmount Fixed Base for Sauer 404 is a rifle-specific mounting base intended for shooters who want a dedicated, stable optic installation on the Sauer 404 platform. It also matches the Sauer 303 (SUM) and Sauer SUM mount interface, which makes it relevant for users working within that family of mounting standards. As a fixed base, it is best suited to rifles that carry one primary optic rather than being regularly reconfigured between multiple sights.

The design centres on a low 11.00 mm build height, which helps keep the sight line close to the barrel. In practical use, that usually means a more natural head position, less need to lift the cheek from the stock and a setup that feels better integrated with the rifle. The 0 MOA inclination keeps the base neutral, making it a sensible choice for conventional hunting and sporting applications where a straightforward zero is preferred over a pre-tilted long-range arrangement.

Its aluminium construction keeps unnecessary weight off the rifle while still providing a rigid platform for the upper mount components. The listed KR 0.0 mm extension indicates a non-offset configuration, so the base preserves a direct, centered mounting position instead of shifting the optic forward or rearward. Finished in black, it matches the restrained, functional look expected of a modern hunting optics mounting component.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, a German company based in Fuchsstadt, Germany. The company manufactures hunting rifles, rifle-scope mounts and red-dot sights at its Fuchsstadt site, which places mounting systems within a broader firearms and aiming-equipment background rather than as an isolated accessory line. Within the optics category, INNOmount is known for offering both quick-clamping and fixed rifle mounts for a wide range of platforms.

The brand’s range includes mounting solutions for Weaver/Picatinny rails as well as several rifle-specific bases, and its product types extend across tactical, swing and tilt-up mounts. INNOmount also offers scope rings in common diameters such as 25.4 mm, 30 mm, 34 mm and 35 mm, showing a clear focus on compatibility with modern sporting and hunting optics. That combination of rifle-specific fit, broad interface coverage and German production defines the brand’s place in the mount market.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount Spare Parts
• Made in: Germany
• Material: Aluminium
• Color: Black
• Height BH.: 11.00 mm
• Extension (KR): KR 0.0 mm
• Inclination: 0 MOA
• Compatibility: Sauer 303 (SUM), Sauer 404, Sauer SUM mount

Warranty

10 years. This fixed base is covered by a 10-year warranty, providing long-term support for a component intended to remain as a permanent part of the rifle’s optic mounting setup.