CZ Shadow 2 Adapter Plate for Trijicon RMR/SRO, Optic Ready

• Direct Optics-Ready Fit: This adapter plate is made for CZ Shadow 2 Optic Ready pistols, giving the slide a clean, purpose-built interface for mounting a compatible red dot without improvised solutions.
• Trijicon RMR Footprint: The plate uses the Trijicon RMR mounting standard, allowing fitment for RMR- and SRO-pattern pistol optics and making it easier to match the pistol to competition or defensive sight preferences.
• 0 MOA Alignment: With 0 MOA inclination, the optic sits in a neutral position that suits handgun red-dot use, keeping the sight picture natural and simplifying zeroing at typical pistol distances.
• Steel Construction: The steel body adds the rigidity needed for slide-mounted use, helping the optic stay secure under repeated recoil and frequent handling.
• Low-Profile Factory Solution: Designed as part of the CZ Red Dot Mounts family, the plate provides a dedicated footprint-specific setup that keeps the installation compact and mechanically straightforward.

About the CZ Red Dot Mounts Series

CZ Red Dot Mounts are CZ’s dedicated adapter plates for optics-ready pistols, built around the idea that a pistol slide should use a footprint-specific mounting plate rather than a one-size-fits-all interface. Within the range, CZ offers separate plates for widely used mini red-dot standards including Trijicon RMR and SRO, Aimpoint Acro, Docter and Vortex Venom, C-More, Shield RMS, and other listed footprints. That approach keeps the mounting geometry simple and allows each plate to match the optic pattern it is intended to support.

In CZ’s lineup, these mounts serve shooters who want to equip an Optics Ready pistol for competition, range use, or practical carry-oriented setups while retaining a factory-matched mounting solution. The series is positioned as a pistol accessory family rather than a universal aftermarket system, and its role is straightforward: connect the slide’s optics-ready interface to a compatible sight footprint with the correct plate. For shooters using modern handgun optics, the main advantage is a more orderly setup process, with each plate tailored to a specific standard instead of asking one adapter to cover several different patterns.

About the CZ Shadow 2 Adapter Plate for Trijicon RMR/SRO, Optic Ready

The CZ Shadow 2 Adapter Plate for Trijicon RMR/SRO, Optic Ready is a dedicated mounting solution for shooters who want to fit an RMR-pattern optic to a CZ Shadow 2 Optic Ready pistol. Its main purpose is to bridge the pistol’s factory optics-ready cut to the Trijicon RMR standard, which also makes it suitable for SRO-pattern use. For practical shooting disciplines, that matters because it lets the pistol accept one of the most established handgun optic footprints without adding unnecessary complexity.

The plate uses a steel construction, which is especially relevant on a reciprocating pistol slide where the mount must cope with repeated recoil forces and constant movement. A rigid steel plate helps maintain mounting security and supports consistent optic alignment over long training cycles. The black finish keeps the appearance discreet and visually consistent with the pistol and optic.

Its 0 MOA inclination is appropriate for handgun red-dot use, where the goal is a natural sight presentation rather than built-in elevation bias. In practice, this keeps the optic in a neutral orientation and supports straightforward zeroing at normal pistol distances. As a footprint-specific plate rather than a universal adapter, it is best suited to shooters who already know they want an RMR or SRO-style red dot on their Shadow 2 and want a compact, factory-matched mounting interface.

About CZ

CZ, or Česká zbrojovka a.s., is based in Uherský Brod, Czech Republic. A firearms factory was established there in 1936, and the present company was founded in 1992 after the privatization of the state enterprise. CZ produces a broad range of firearms including pistols, rimfire and centerfire rifles, shotguns, and semi-automatic rifles and carbines.

In the pistol segment, the company is especially well known for families such as the CZ 75, CZ P-10, CZ SHADOW 2, and CZ TS 2, which makes it directly relevant to handgun optics accessories like this adapter plate. The company became part of Česká zbrojovka Group in 2018, and in 2021 its parent group acquired Colt. That background places CZ among the established European firearms manufacturers with a strong focus on practical, sporting, and service-oriented handgun platforms.

Main Features

• Manufacturer: CZ
• Mount Series: CZ Red Dot Mounts
• Made in: Czech Republic
• Extension: KR 0.0 mm
• Inclination: 0 MOA
• Mounting Standard: Trijicon RMR
• Color: Black
• Material: Steel
• Compatibility: Shield RMS Mounting Standard

Warranty

2 years. CZ states a 2-year warranty for this adapter plate, providing defined manufacturer coverage for this factory accessory.

In the Box

• Adapter plate
• M3x8 screws