Armanov Free Float Toolhead Assembly for Dillon S1050 and RL1100

• Free-Float die mounting: The toolhead is designed to work with Armanov Free Float Rings, allowing each die to self-center on the case. In practice, this helps reduce the effect of small vibrations between stations and supports more consistent, concentric ammunition.
• Extra 7/8-14 UNF die station: An additional threaded station over the primer seating mechanism gives more setup flexibility for specialized dies such as a hold-down die or flare and expander die.
• 3 mm thinner die base: The slimmer die base creates room for dies with a very short threaded portion, making the assembly easier to configure with a wider range of standard reloading dies and locking rings.
• Direct fit for Dillon S1050 and RL1100: Built as a bolt-on upgrade for these presses, the assembly simplifies installation while replacing the original toolhead arrangement with a more adaptable setup.
• Aluminium construction with preinstalled pins: The rigid aluminium body keeps the assembly durable while the preinstalled pins and included ratchets help streamline setup on compatible presses.

About the Free Float Series

Armanov Free Float reloading components are built for reloaders who want more control over die alignment and repeatability on progressive presses. Within Armanov’s reloading range, the Free Float system focuses on reducing the influence that one die station can have on another by allowing the die to center itself on the case rather than being held in a completely fixed relationship to the toolhead. That design is especially relevant to users loading high volumes while still paying close attention to concentricity and setup consistency.

In practical terms, the series combines standard 7/8-14 UNF die compatibility with a mounting concept intended to make fine adjustments easier and die changes more repeatable. It is aimed at competition shooters, serious handloaders and other users who want a progressive press to behave in a more controlled and predictable way. Across the series, the emphasis is on robust machined parts, compatibility with established press platforms and a layout that supports both routine loading and more specialized die arrangements.

About the Armanov Free Float Toolhead Assembly for Dillon S1050 and RL1100

The Armanov Free Float Toolhead Assembly for Dillon S1050 and RL1100 is a press upgrade for reloaders who want more flexibility from a high-output progressive platform without giving up standard die compatibility. It is made as a direct bolt-on assembly for the Dillon Super 1050 and RL1100 and uses 7/8-14 UNF threads, so it accepts industry-standard dies and locking rings. That makes it easier to integrate into an existing loading setup instead of forcing the use of proprietary tooling.

What sets this model apart is its support for the Free Float system. When used with Armanov Free Float Rings, each die can self-center on the case, helping limit the transfer of small movements and vibrations from one station to another. For the reloader, that means a setup aimed at more consistent die alignment and more repeatable ammunition geometry. The system also supports very fine die depth adjustment, and because the lock ring stays fixed on the die, reinstalling the die in the same station helps preserve the previous setting.

The toolhead also uses a 3 mm thinner die base, which creates clearance for dies with a short threaded section. An additional die station over the primer seating area expands setup options for users who want to add a hold-down die or a flare and expander die. The assembly comes with preinstalled pins, includes two ratchets for Super 1050 and RL1100 use, and uses a shellplate lock ring with a single brass-tipped securing bolt for simpler adjustment.

About Armanov

Armanov Ltd. is a Slovenian company based in Trzin, Slovenia. The company develops shooting equipment and accessories for sport shooting, with a product range that includes reloading accessories and ammunition checkers as well as parts for handguns and rifles. In manufacturing, Armanov uses CAD/CAM product design together with CNC production, which fits the precise, machined character of products such as press upgrades and reloading components. The company also states that its team brings more than two decades of IPSC competition experience, a background that helps explain its focus on practical competition-oriented equipment and efficient workshop tools.

Main Features

• Manufacturer: Armanov
• Made in: Slovenia
• Material: Aluminium
• Accessories for: Presses

Warranty

2 years. Armanov states a two-year warranty period for this product.

In the Box

• 1 x Aircraft-grade high-strength anodized aluminium toolhead with pressed-in pins
• 2 x Ratchets for Super 1050 and RL1100 with casefeed cam
• 1 x Shellplate lock ring with thread-locker screw pin
• 1 x 3 mm hex key
• 1 x Instruction manual in PDF format