Sako TRG 21/41

Sub Categories

Red Dots

Mounts

Sales

The History of Sako

Sako (Suojeluskuntain Ase- ja Konepaja Oy) is rifle and ammunition manufacturer located in Riihimäki, Finland. It was founded in 1921, after the rifle repair workshop, opened in former Helsinki brewery, became independent of the civil guard. The workshop grew into a weapons factory, which produced hunting rifles as well as cartridges and moved its headquarters from Helsinki to Riihimäki. The first civilian rifle bearing the name Sako, was the L42, prototyped in 1942 and commercially manufactured a few years later.

After the World War II, domestic hunting culture thrived and Sako invested in development of hunting rifles. Due to this investment, domestic sales increased along with export to the USA and the rest of the world. In the 1980s, Sako merged with another firearm manufacturer, Tikkakoski and gained a valuable rifle line called Tikka. The production of military and law enforcement weapons started when Finnish defence forces ordered assault rifles and cartridges from Sako.

The company has changed multiple owners since 1921, but has ultimately been sold to Italian Beretta Holding in 2000. In 2006, Sako celebrated its 85th anniversary by launching a new hunting rifle family, Sako 85. In 2020, Sako introduced S20, the first truly hybrid rifle, designed for both; hunters and tactical shooters. Another novelty presented by Sako in 2020 was a brand new, lead-free Sako Powerhead bullet.

Sako TRG 21/41 Rifle Review

Sako TRG is one of the global icons in the precision shooting world. It has been in production for a long time already, serving as a crown jewel for the company. Sako has produced TRG-21 and TRG-41 from 1989 to 1999 and then replaced them with TRG-22 and TRG-42, which are still being produced. They added A1 and M10 models to their inventory in the 21st century.

Sako TRG-21 and TRG-41 originate from successful Sako TR-6 and hardly produced Valmet Sniper M86 of the company Valmet, with which Sako merged a few years before. The TRG-21 is a result of a thorough study of sniper requirements performed by Sako. Later, a second precision rifle emerged from TRG-21, named TRG-41, which was produced to take advantage of the high calibre cartridges. Sako TRG-21 was chambered for .308 Win, while TRG-41 was chambered for .338 Lapua Magnum.

After years of improving the rifles and accessories, Sako came out with all-new TRG-22 and TRG-42. Sako TRG 21/41 and TRG 22/42 all have 16.5mm (sometimes it says 17mm) dovetail on top of the rifle, with three holes at the front and three holes at the back for mounting purpose. This means, Sako kept this part of the rifle the same on TRG 21, 41, 22 and 42 rifles, so the mounts that fits one of these rifles will fit the other 3 as well.

Another Finnish rifle with very similar receiver mounting surface is Tikka T3, which also has 16.5mm dovetail, so many mounts from aforementioned rifles fit T3 and vice versa. Despite the similar receiver mounting surface, Tikka T3 is mostly equipped with hunting mounts, while the TRG 21/41 is equipped almost exclusively with tactical mounts – picatinny rails and monoblock mounts.

Sako TRG 21/41

Figure 1: Sako TRG 21 in .308 Win. (source: http://tonnel-ufo.ru/foto/oruhie/snaiper_2/finlandia/sako_trg_21.jpg)

Sako TRG 21/41 Calibers

Sako TRG 21/41 is available in these calibers:

.308 Winchester
.338 Lapua Magnum

Scope Mounts Interchangeable With Sako TRG 21/41

Even though Sako’s traditional mounting system is tapered dovetail, they chose 16.5mm dovetail mounting system for their TRG 21 and TRG 41, which stayed the same through the years, so the successors of 21/41 - Sako TRG 22 and TRG 42 inherited this same mounting system, along with Tikka T3 and some of the Tikka rifles that came before the T3. Therefore the mounts for all these rifles can contain either “TRG”, “21/41”, “22/42” or “Tikka T3” in their names and they will still fit all of them.

Figure 2: The Receiver of Sako TRG 22. The latter is a successor to TRG 21 and they both share the same mounting surface (source: https://www.collectorsfirearms.com/products/147156-sako-trg-22-308-win-r28641.html)

Best Scope Mounts for Sako TRG 21/41

Detachable repeatable scope mounts for Sako TRG 21/41:

If you would like to have repeatable mounts, we advise you to mount Picatinny rail on the receiver and then repeatable monoblock on top of this Picatinny rail. For repeatable monoblock we would advise you to go with Spuhr QD.

Picatinny Rails for Sako TRG 21/41:

For mounting a Picatinny rail, we can make use of the 6 holes placed in the dovetail. With the help of these holes, we can install a Picatinny rail on top of the dovetail and then install any mount that fits the Picatinny.

Help us build our riflescope mounts database

If you have this rifle or any other rifle at home, we would really appreciate it if you could send us some photos of the rifle receiver (mounting surface of the rifle when there are no mounts installed), because it would help us expand our rifle mounts database. If you send us a photo of rifle receiver which we don’t already have, that would be of great value to us and we will definitely reward you for your help.

Please send us an email for more information. You can contact us here: [email protected]

Filters

Sort

In stock

Aimpoint ACRO C-2

As low as CHF 472.22 Regular Price CHF 519.53

View Product

Sako TRG 21/41

Sub Categories

The History of Sako

Sako TRG 21/41 Rifle Review

Sako TRG 21/41 Calibers

Scope Mounts Interchangeable With Sako TRG 21/41

Best Scope Mounts for Sako TRG 21/41

Detachable repeatable scope mounts for Sako TRG 21/41:

Picatinny Rails for Sako TRG 21/41:

Help us build our riflescope mounts database

Leave us a message

Your wishlist