Recknagel Front Foot with Base for Suhl-Claw Mount for S&B Convex Rail

• Traditional detachable design: This front foot with base is made for the Recknagel Suhl-Claw Mount system, giving classic hunting rifles a low, elegant detachable mounting solution that suits traditional gunmaking and practical field use.
• Made for S&B Convex Rail: The upper interface is matched to the Schmidt & Bender Convex Rail, so the scope sits securely and in proper alignment without relying on generic ring geometry.
• Steel construction: The steel body provides the rigidity and wear resistance needed in a locking mount component, helping the interface stay consistent through repeated removal and refitting.
• 0 MOA inclination: With 0 MOA built in, this part keeps the optical axis neutral, which suits classic hunting setups where a straightforward zero and conventional shooting distances matter more than long-range elevation bias.
• Built in Germany: German manufacture reflects the close tolerances expected from a fitted claw-mount component, which is important in a system designed to lock up cleanly and return to position when properly installed.

About the Recknagel Suhl-Claw Mounts Series

Recknagel Suhl-Claw Mounts continue a mounting style that was developed by gunsmiths in Suhl in the 1920s. The series belongs to the traditional side of the hunting optics market, where the priority is not modular rail compatibility but a low-profile, mechanically refined connection between rifle and scope. It remains a relevant choice for classic hunting rifles, combination guns, and restorations where the character of the firearm matters as much as practical function.

The system uses a front hook and rear locking arrangement to attach and detach the scope assembly. When properly fitted, it is intended to return the optic to the same position after removal and replacement, which is one of the reasons claw mounts remain valued for rifles that alternate between scoped and open-sight use. Recknagel offers the series in versions for scope rings and manufacturer-specific rails, including rail interfaces for premium European optics. Unlike standardized rail systems, Suhl claw mounts are designed to be individually fitted to the firearm, which is central to both their precision and their traditional appeal.

About the Recknagel Front Foot with Base for Suhl-Claw Mount for S&B Convex Rail

The Recknagel Front Foot with Base for Suhl-Claw Mount for S&B Convex Rail is a specialized upper mounting component for building or replacing the front engagement point of a traditional claw-mount setup. Its role is straightforward but important: it forms the front interface that hooks into the Suhl-style mount while matching the profile of a Schmidt & Bender Convex Rail. That makes it particularly relevant for classic hunting rifles being paired with modern premium rail-equipped optics without abandoning the look and handling of a traditional detachable mount.

The use of steel construction matters here because the front foot is a load-bearing contact point in a mount that is meant to be removed and reattached over time. Steel resists wear at the engagement surfaces and supports the precise fit that claw mounts depend on. The 0 MOA inclination keeps the setup neutral, which suits conventional hunting applications where the goal is a clean, centered zero rather than added elevation for extended-range dialing.

In practical terms, this part is best understood as a precision component rather than a universal accessory. It is made for compatibility above with S&B Convex Rail optics and below with Suhl Claw Scope Mounts, so it belongs in a fitted system assembled around those exact interfaces. For hunters and gunsmiths working on a traditional detachable mount, that specific fit is the main advantage: secure engagement, correct alignment, and a finished installation that stays true to the rifle’s original style.

About Recknagel

Recknagel traces its origins to 1867, when Adolf Recknagel began manufacturing firearm sights in Albrechts near Suhl, Thuringia. The company is a German specialist in riflescope mounting systems, sights, and hunting accessories, with a product range that also includes Picatinny rails, triggers, safeties, and hunting silencers. This long focus on the mechanical interface between firearm and optic is what makes the brand especially relevant in the mount category.

Over time, Recknagel expanded from traditional hunting products into more modern systems while keeping its manufacturing base in Germany. The company introduced the ERATAC line of tactical mounts and accessories in 2010, and later added lightweight hunting silencers in 2016. That combination of traditional gunmaking heritage and modern precision manufacturing gives Recknagel a strong reputation among shooters who need dependable mounting components, whether for classic claw mounts or contemporary tactical optics platforms.

Main Features

• Manufacturer: Recknagel
• Series: Recknagel Suhl-Claw Mounts
• Made in: Germany
• Warranty: 10 years
• Inclination: 0 MOA
• Scope / Sight Type: S&B Convex Rail
• Color: Green / Black
• Material: Steel
• Compatibility Above: S&B Convex Rail
• Compatibility Below: Suhl Claw Scope Mounts

Warranty

Recknagel provides a 10-year warranty for this mount component. That period suits a steel mounting part intended for long-term use in a fitted detachable scope-mount system.