RCBS Reloading 1 1/2 Inch 12 Bullet Puller without Collet

• 1 1/2 Inch-12 Threaded Design: Built for the large-thread RCBS AmmoMaster platform, this bullet puller gives reloaders a secure, press-mounted way to disassemble heavy loaded rounds and recover usable components.
• Collet-Driven Bullet Removal: The puller body works with caliber-specific collets sold separately, letting it grip the bullet correctly for controlled removal instead of relying on impact methods.
• Component Salvage for Large Cartridges: It is intended for pulling bullets from loaded ammunition so brass, bullets and other components can be reused when correcting loads or breaking down rounds.
• Steel Construction: The steel body provides the rigidity needed for repeated press use, helping the tool stay consistent when working with large, tightly assembled cartridges.
• Made in USA: Domestic manufacture reflects RCBS's long focus on reloading equipment and gives this accessory the fit and finish expected for bench use.

About the RCBS Reloading Series

RCBS reloading tools are built for handloaders who want a broad, bench-oriented system rather than isolated accessories. Across the lineup, the company covers the full reloading process, from presses and dies to case preparation, priming, powder handling and correction tools for fixing mistakes at the bench. That makes the series especially relevant to shooters who load for both routine practice and more specialized rifle or pistol applications.

Within that broader family, RCBS accessories follow a practical design approach: durable metal construction, compatibility with established press standards where applicable, and tools that solve specific workflow problems without unnecessary complexity. In use, that means equipment intended to hold alignment well, stand up to repeated cycles and integrate naturally into a conventional handloading setup. Products such as bullet pullers are a good example of this philosophy, because they are made not just to remove bullets, but to do so in a way that helps preserve valuable components for reuse. For reloaders working with everything from common cartridges to large specialized rounds, RCBS bench tools are positioned as dependable workshop equipment with a clear emphasis on repeatability and service life.

About the RCBS Reloading 1 1/2 Inch 12 Bullet Puller without Collet

The RCBS Reloading 1 1/2 Inch 12 Bullet Puller without Collet is a specialized press-mounted tool for reloaders working with large ammunition on the AmmoMaster-2 or AmmoMaster .50 BMG press. Instead of using a kinetic puller, this design uses the leverage and alignment of the press to remove bullets from loaded rounds in a more controlled way. That matters when the goal is not only to correct a loading mistake, but also to salvage components with less risk of unnecessary damage.

The body is made to work with .416 or .50 BMG bullet puller collets, which are sold separately. This collet-based system gives the tool its practical advantage: the bullet is gripped by the correct caliber-specific insert, so removal is more deliberate and better suited to large cartridges than a one-size-fits-all approach. For reloaders who occasionally need to break down ammunition because of an incorrect charge, seating issue or component change, that translates into a cleaner bench process and a better chance of recovering usable brass and projectiles.

Steel construction supports the heavy-duty role of the tool, while the 1 1/2 Inch-12 thread matches the large press format it was designed for. In practice, this is not a general-purpose puller for every setup, but a purpose-built RCBS reloading accessory for high-capacity presses and large cartridges where strength, alignment and controlled operation matter most.

About RCBS

RCBS was founded in 1943 by Fred T. Huntington in Oroville, California, and the brand grew out of his original bullet-swaging die, which gave the company its name: Rock Chuck Bullet Swage. From the beginning, RCBS focused on ammunition handloading equipment, and that remains the core of the brand today.

RCBS manufactures reloading tools in Oroville, California, with a product range centered on rifle and pistol cartridge reloading. Its catalog includes presses, dies, shell holders, powder measures and priming tools, covering both basic bench setups and more advanced loading workflows. The company also offers single-stage, turret and progressive reloading presses, which reflects its long-standing specialization in practical tools for reloaders who want a complete system rather than one-off accessories.

Main Features

• Manufacturer: RCBS
• Product type: Bullet puller
• Thread: 1 1/2 Inch 12
• Compatible presses: AmmoMaster-2, AmmoMaster .50 BMG press
• Required collets: .416 or .50 BMG bullet puller collets
• Configuration: Without collet
• Material: Steel
• Accessories for: Reloading
• Color: Silver
• Made in: USA

Warranty

2 years. This RCBS reloading accessory is covered by a two-year warranty period.