INNOmount ZERO for Weaver/Picatinny, Pulsar Trail 2

• ZERO repeatability: This INNOmount mount is built for repeatable removal and reinstallation, so a Pulsar Trail 2 or Digisight Ultra can be moved off the rifle and returned without turning a simple optic change into a full re-zeroing job.
• Weaver/Picatinny interface: The base fits the most common rail standard used on modern rifles, which makes it a practical choice for shooters who want one thermal or digital sight setup to work across multiple compatible platforms.
• Pulsar-specific upper: The mount is made for the Pulsar Trail2 / Digisight Ultra N450 & N455 footprint, giving these devices a secure mechanical fit instead of relying on improvised adapters.
• Aluminium construction: The aluminium body keeps weight under control while still providing the rigidity needed for field use, transport and repeated mounting cycles on hunting or utility rifles.
• Low, tool-free handling concept: INNOmount’s quick-clamping approach is designed for fast attachment and removal, which is useful when a rifle alternates between day optics and a thermal or digital sight according to season, terrain or legal hunting conditions.

About the INNOmount One-Piece Mounts Series

INNOmount One-Piece Mounts sit within the brand’s tilt-up mount family and are designed as practical, compact solutions for shooters who want a complete mount rather than separate rings and bases. The series covers both quick-release and fixed one-piece versions, with variants for Weaver/Picatinny rails as well as firearm-specific mounting bases. That broad fitment makes the series relevant not only for conventional daytime riflescopes, but also for thermal-imaging and digital aiming devices that need a dedicated interface and dependable return to position.

Across the range, the design philosophy is straightforward: keep the mount low in profile, mechanically secure and fast to operate in the field. INNOmount’s quick-detach system uses thumb-operated buttons to release recessed locking levers without tools, while Generation II QD versions are specified with anti-rotation clamping screws, spring-loaded release buttons and Torx T20 adjustment screws. The family also spans multiple ring sizes and rail interfaces, including options for Zeiss ZM/VM rails, which shows that the series is built as a modular platform rather than a single-purpose mount line.

About the INNOmount ZERO for Weaver/Picatinny, Pulsar Trail 2

The INNOmount ZERO for Weaver/Picatinny, Pulsar Trail 2 is a dedicated one-piece mount for shooters using a Pulsar Trail2 or Digisight Ultra N450/N455 on rifles equipped with a Weaver or Picatinny rail. Its main advantage is not simply that it joins optic and rifle, but that it does so in a way that supports quick changes between setups while preserving the consistency expected from a repeatable mount. For hunters and night-shooting users who alternate between a daytime optic and a thermal or digital sight, that practical handling matters as much as raw strength.

The ZERO concept is especially useful when one sight is shared across more than one compatible rifle or when the optic must be removed for transport, storage or a change in hunting conditions. A repeatable detachable mount reduces downtime and helps keep the rifle ready with less adjustment after reinstallation. Because this model is built specifically around the Pulsar Trail mounting standard, it provides a proper mechanical match for the sight rather than a generic clamping solution.

The body is made from aluminium, giving the mount the stiffness needed for field use without adding unnecessary bulk to a rifle already carrying a thermal or digital device. With no windage adjustment in the mount itself, the design stays simple and robust, leaving alignment and zeroing to the sighting system and rifle setup. The result is a purpose-built NV and thermal mount that prioritises secure fit, repeatable positioning and fast handling on modern rail-equipped rifles.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, a German company based in Fuchsstadt, Germany. INNOGUN manufactures hunting rifles, rifle-scope mounts and red-dot sights at its Fuchsstadt site, which places the brand firmly in the field of sporting and shooting optics hardware rather than general accessories. Within the INNOmount range, the company offers quick-clamping and fixed rifle mounts for Weaver/Picatinny rails as well as numerous rifle-specific mounting bases.

The brand’s catalogue also includes tactical, swing and tilt-up mounts, showing a strong focus on matching the mounting system to the rifle, optic and intended use. INNOmount additionally offers scope rings in 25.4 mm, 30 mm, 34 mm and 35 mm diameters, reflecting a product line built around compatibility with both traditional daytime optics and more specialised sighting systems.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount One-Piece Mounts
• Made in: Germany
• Mount type: One-piece detachable mount
• Interface above: Pulsar Trail Mounting Standard
• Compatible sight type: Pulsar Trail2 / Digisight Ultra N450 & N455
• Interface below: Weaver/Picatinny
• Windage adjustable: No
• Material: Aluminium

Warranty

10 years. INNOmount states a 10-year warranty for this mount, providing long-term cover for a component that is expected to withstand repeated attachment cycles and regular field use.