INNOmount Pulsar Thermion Pivot Mount, Kepplinger Repetierer

• Pivot-mount fit for Pulsar Thermion: This one-piece mount is built specifically for the Pulsar Thermion interface, giving a secure and repeatable connection for thermal optics that are used on hunting rifles.
• Made for Kepplinger Repetierer rifles: The lower interface is matched to the Kepplinger Repetierer, which helps keep installation straightforward and preserves the correct fit between rifle and optic.
• High-strength aluminium construction: The aluminium body keeps weight under control while providing the rigidity a thermal sight mount needs to maintain alignment during regular field use.
• Adjustable windage: Built-in windage adjustment gives extra latitude during setup, helping center the optic mechanically and simplifying zeroing.
• 23.00 mm build height with 0 MOA inclination: The moderate mounting height and neutral cant support a practical sight line for general hunting use without adding unnecessary elevation bias.

About the INNOmount Pivot Mounts Series

INNOmount Pivot Mounts sit in the manufacturer’s swing-mount category and are designed for shooters who want a detachable mounting solution without moving away from a rifle-specific fit. The series uses a high-strength aluminum base body, balancing low weight with the stiffness needed for stable optic support. Across the range, INNOmount offers interfaces for conventional scope rings as well as dedicated footprints such as Swarovski SR and Zeiss ZM/VM, which shows that the family is built to cover both classic day optics and more specialized sighting systems.

The design philosophy of the series is practical rather than universal. Instead of a one-size-fits-all mount, each version is configured around a specific optic interface and rifle platform. The lineup is available with either a lever lock for 15 mm prism or an EAW pivot-bolt lock, giving users a choice between different attachment concepts within the same overall system. In use, that makes the series well suited to hunting rifles where repeatable removal, compact handling, and a clean mechanical fit matter as much as raw strength.

About the INNOmount Pulsar Thermion Pivot Mount, Kepplinger Repetierer

The INNOmount Pulsar Thermion Pivot Mount is a dedicated one-piece solution for pairing a Pulsar Thermion thermal riflescope with a Kepplinger Repetierer. That specific pairing is what defines the mount’s value: it is not a generic adapter, but a rifle-and-optic-specific interface intended to give a stable mechanical connection with the proportions needed for this style of thermal sight. For hunters using a Thermion as a primary low-light or night-time optic, that matters because the mount becomes part of the sighting system, not just an accessory.

The body is made from aluminium, which keeps the mount robust without adding unnecessary bulk to a rifle already carrying a thermal optic. Its 23.00 mm build height helps position the sight at a practical level, while the 0 MOA inclination keeps the setup neutral and appropriate for general-purpose hunting distances rather than forcing in extra cant for specialized long-range correction. The inclusion of adjustable windage is especially useful in practice, as it allows finer alignment of the optic during installation and can reduce the need for excessive internal correction in the sight itself.

Finished in black, the mount keeps a subdued appearance that matches modern hunting and thermal setups. For users who want a detachable pivot-style mounting system tailored to a Thermion-equipped Kepplinger rifle, this model focuses on fit, alignment, and repeatable everyday use.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, based in Fuchsstadt, Germany. The company manufactures hunting rifles, riflescope mounts, and red-dot sights at its Fuchsstadt site, which places mounting systems within a broader firearms and aiming-equipment background rather than treating them as stand-alone accessories. Within the INNOmount range, the brand covers tactical, swing, and tilt-up mounts, along with quick-clamping and fixed rifle mounts for a wide variety of optic and rifle interfaces.

The brand’s catalog also reflects a strong focus on compatibility. INNOmount offers scope rings in sizes including 25.4 mm, 30 mm, 34 mm, and 35 mm, and its mounts are available for Weaver/Picatinny rails as well as numerous rifle-specific mounting bases. That specialization is particularly relevant in hunting optics, where correct fit, repeatable positioning, and a clean mechanical interface are often more important than broad cross-platform interchangeability.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount Pivot Mounts
• Made in: Germany
• Material: Aluminium
• Build height: 23.00 mm
• Extension (KR): KR 0.0 mm
• Inclination: 0 MOA
• Windage adjustable: Yes
• Optic type: Pulsar Thermion
• Color: Black
• Compatibility above: 30 mm
• Compatibility below: Kepplinger Repetierer

Warranty

INNOmount provides a 10-year warranty for this mount. That long coverage period suits a precision mounting component intended for repeated installation, removal, and regular field use.