INNOmount for Tikka T3, Pulsar Trail 2

• Rifle-specific fit for Tikka T3/T3x: This one-piece INNOmount is made for the Tikka T3 platform, giving a direct, model-matched interface that helps keep the sight aligned securely on the rifle.
• Built for Pulsar Trail 2 and Digisight Ultra: The mount is configured for Pulsar Trail2 / Digisight Ultra N450 & N455, so it suits digital and thermal hunting optics that need a stable, purpose-built attachment rather than generic rings.
• Low 10.00 mm build height: A low mounting height helps keep the sight closer to the bore line, which supports a more natural head position and a more consistent shooting setup in the field.
• Repeatable detachable design: INNOmount quick-clamping mounts are designed for fast removal and reattachment without tools, making it easier to swap optics while maintaining dependable return-to-zero behavior.
• 0 MOA inclination: The straight, non-canted setup is well suited to general hunting and observation use, where a simple, level mounting geometry is preferred over long-range elevation bias.

About the INNOmount One-Piece Mounts Series

INNOmount One-Piece Mounts sit within the brand’s tilt-up mount family and are built around the idea of fast, practical optic changes on hunting and sporting rifles. The series includes both quick-release and fixed versions, with variants for firearm-specific bases as well as common rail standards. That broad fitment makes the line relevant not only for conventional daytime riflescopes, but also for thermal-imaging and digital devices that often require dedicated interfaces.

A defining feature of the series is the brand’s quick-detach concept, which uses thumb-operated release buttons to unlock recessed clamping levers without tools. In Generation II form, the system was specified with anti-rotation clamping screws, spring-loaded release buttons and Torx T20 adjustment screws, reflecting a design focus on secure lock-up and repeatable positioning. Within the wider INNOmount range, one-piece mounts are offered for platforms such as Tikka T3, as well as for Weaver/Picatinny applications and several optic interfaces. The result is a modular family intended for shooters who want a compact, low-profile mount with straightforward handling and consistent mechanical engagement.

About the INNOmount for Tikka T3, Pulsar Trail 2

The INNOmount for Tikka T3, Pulsar Trail 2 is a dedicated one-piece mount for pairing a Tikka T3 or T3x rifle with compatible Pulsar digital or thermal optics. Instead of adapting a general-purpose ring setup, this mount uses a rifle-specific base geometry and a sight-specific interface for Pulsar Trail2 / Digisight Ultra N450 & N455. That matters in practice because these devices have their own mounting format and are often used in low light, where a secure, repeatable attachment is especially important.

The mount uses a 10.00 mm build height and KR 0.0 mm extension, keeping the optic low and centered without adding unnecessary forward or rearward offset. This supports a more natural cheek weld and helps the rifle handle in a balanced way, particularly on hunting rifles carried over longer periods. The 0 MOA inclination keeps the setup simple and level, which suits typical night hunting and observation distances where a neutral mounting angle is the practical choice.

As part of the INNOmount one-piece concept, this model is aimed at users who value quick handling and clean integration. The black finish gives it a discreet appearance on modern hunting rifles, while the one-piece construction helps keep the optic and rifle connected as a single, stable unit. For shooters using a Tikka action with a Pulsar Trail 2 pattern device, this mount offers a direct solution that prioritizes fit, low profile and repeatable installation.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, based in Fuchsstadt, Germany. The brand focuses on rifle mounting solutions, including quick-clamping and fixed mounts for a wide range of rifles and optic interfaces. Its catalog covers mounts for Weaver/Picatinny rails as well as several rifle-specific mounting bases, alongside product types such as tactical, swing and tilt-up mounts.

INNOGUN manufactures hunting rifles, riflescope mounts and red-dot sights at its Fuchsstadt site, which places INNOmount firmly in the field of practical hunting and shooting equipment rather than general accessories. The range also includes scope rings in common diameters such as 25.4 mm, 30 mm, 34 mm and 35 mm, showing the brand’s emphasis on broad compatibility across modern optics. In this category, INNOmount is best known for mechanically focused designs that combine direct fitment, fast handling and repeatable attachment.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount One-Piece Mounts
• Made in: Germany
• Mount height BH.: 10.00 mm
• Extension (KR): KR 0.0 mm
• Inclination: 0 MOA
• Optic / sight type: Pulsar Trail2 / Digisight Ultra N450 & N455
• Color: Black
• Compatibility: Tikka T3, Tikka T3x

Warranty

INNOmount provides a 10-year warranty for this mount. That long coverage period matches the product’s role as a durable mechanical interface intended for repeated installation and field use.