Hawke Endurance 30 WA 1.5-6x44

• H5 Optical System with 18-Layer Fully Multi-Coated Crown Glass Lenses: The Endurance 30 WA 1.5-6x44 is built on Hawke's H5 optical system, using high-grade, low-dispersion Crown glass with 18-layer fully multi-coated lenses — a higher optical specification than the H2-based Vantage models. The additional coating layers and Crown glass contribute to higher light transmission and a cleaner, more detailed image across the magnification range, with an exit pupil of 29mm at 1.5× supporting a bright, accessible sight picture in the low-light conditions most relevant to driven hunting.
• Ultra-Wide 24° Field of View for Driven Hunting: The wide-angle optical design delivers a field of view of 27.6 metres at 100 metres at minimum magnification — among the widest available in any 1.5-6× riflescope. This broad sight picture supports fast target acquisition and tracking of moving game in driven hunting scenarios where animals may cross the field of fire quickly and at varying distances, and where the shooter must identify and engage a target with minimal time to raise and align the scope.
• Generous 102mm Eye Relief: The 102mm of eye relief is one of the most practical features of this model for hunting use. On heavy-recoiling centrefire rifles — particularly those used for driven hunting of large game — adequate eye relief is essential to prevent the eyepiece from striking the shooter's face on discharge. The 102mm clearance is sufficient for comfortable use across virtually all centrefire rifle platforms, including those with significant recoil.
• Multi-LED Illuminated L4A Dot Reticle: The L4A Dot reticle features a multi-LED illumination system with 6 brightness levels in red, controlled via a saddle-mounted rheostat. Multi-LED illumination provides higher brightness consistency and reticle uniformity than single-LED designs, ensuring the aim point is clearly visible across a wide range of ambient light conditions — from low-light woodland settings at dusk through to bright daytime use in open country.
• Compact 30mm Build at 336mm and 569g: At 336 mm in length and 569 g, the scope is compact and well proportioned for use on driven hunting rifles. The 30mm mono-tube chassis is machined from aircraft-grade aluminium and hard-anodized, providing structural rigidity while maintaining a practical overall weight for a large-objective wide-angle riflescope.

About the Endurance 30 WA Series

The Hawke Endurance 30 WA series is Hawke's mid-tier wide-angle hunting riflescope range, built on the H5 optical system and positioned above the H2-based Vantage lineup. All Endurance 30 WA models are designed around the wide-angle optical philosophy — delivering a substantially broader field of view at minimum magnification than standard designs in the same magnification classes — combined with generous eye relief, multi-LED illumination, and Crown glass lens elements.

The H5 system uses high-grade, low-dispersion Crown glass with a higher coating layer count than the H2 series, providing improved light transmission and image quality across the magnification range. The wide-angle eyebox design also contributes to a more forgiving eye position at low magnification, which is a practical advantage in driven hunting and other dynamic shooting situations. The Endurance 30 WA series covers a range of magnification configurations suited to driven hunting, large game hunting, and general field use, all built on the same 30mm mono-tube chassis with 102mm of eye relief as a consistent design standard across the family.

About the Model (Hawke Endurance 30 WA 1.5-6x44 L4A Dot)

The Hawke Endurance 30 WA 1.5-6x44 L4A Dot is a second focal plane hunting riflescope designed primarily for driven hunting, large game hunting, and any field application where fast target acquisition at close range is the priority, combined with adequate magnification for medium-range shots when the opportunity allows. The 1.5–6× magnification range with a 4× zoom ratio starts from a very low 1.5×, delivering a field of view of 27.6 metres at 100 metres — broad enough to track moving game across the full width of a typical shooting lane in woodland driven hunting — while the 6× upper end provides adequate image detail for deliberate shot placement at the medium distances that represent the upper limit of this optic's intended use range.

The 44mm objective lens, combined with the H5 optical system and 18-layer fully multi-coated Crown glass lenses, provides high light transmission and a clear image across the magnification range. An exit pupil of 29mm at 1.5× is among the largest available in any variable riflescope at minimum magnification, ensuring a full, immediately accessible sight picture even with imprecise eye placement — critical in driven hunting where the rifle is raised and the shot taken under time pressure. The 102mm of eye relief provides safe clearance on heavy-recoiling centrefire platforms.

The L4A Dot reticle features a modified L4 outer post design with a clearly defined centre dot, illuminated in red via a multi-LED system across 6 brightness levels. The multi-LED design provides high brightness consistency for clear aim point visibility across a wide range of ambient light conditions. The capped, low-profile, resettable turrets offer 120 MOA of elevation and windage adjustment in ¼ MOA click increments, protecting the zero from accidental movement during carry. The fixed parallax at 91 metres suits the typical engagement distances of driven hunting and removes parallax management from the shot process. The mono-tube is nitrogen purged and fully sealed, providing waterproof, fogproof, and shockproof performance rated for all calibres. Overall length is 336 mm and weight is 569 g.

About Hawke

Hawke Optics is a British optics brand registered in England and Wales, with products distributed across Europe, North America, and international markets. The company produces a broad range of optical products including riflescopes, airgun scopes, binoculars, spotting scopes, red dot sights, and laser rangefinders, covering applications from hunting and precision shooting to nature observation and marine use.

Hawke organises its riflescope lineup into distinct optical system tiers — from the entry-level H2 through H5 to the flagship H7 — with each tier reflecting the glass specification, coating technology, and mechanical feature level of the products within it. The Endurance series is built on the H5 system, representing the mid-tier of Hawke's riflescope range and providing improved optical performance compared to the entry-level Vantage lineup, particularly in terms of light transmission, image contrast, and field of view.

Main Features

• Magnification: 1.5–6×
• Objective Lens Diameter: 44 mm
• Main Tube Diameter: 30 mm
• Reticle: L4A Dot
• Reticle Position: Second Focal Plane (SFP)
• Illumination: Yes, 6 levels (red), multi-LED
• Click Value: ¼ MOA
• Elevation Adjustment Range: 120 MOA
• Windage Adjustment Range: 120 MOA
• Elevation Turret: Capped, Low-Profile, Resettable
• Windage Turret: Capped, Low-Profile, Resettable
• Parallax: Fixed (91 m / 100 yds)
• Field of View: 27.6–6.9 m @ 100 m / 82.9–20.7 ft @ 100 yds
• Eye Relief: 102 mm
• Exit Pupil: 29–7 mm
• Optical System: H5
• Lens Coating: Fully Multi-Coated, 18 layers (Crown glass)
• Length: 336 mm
• Weight: 569 g
• Construction: Nitrogen purged, waterproof, fogproof, shockproof, all calibre rated

Warranty

The riflescope is covered by a 10-year warranty.

In the Box

• Riflescope
• Lens Covers
• Lens Cloth
• CR2032 Battery
• Instruction Manual