Forster Full Length Sizing Die 7mm PRC, Bench Rest

• Full-length sizing and decapping: Resizes the neck, shoulder and body in one operation while removing the spent primer, helping fired 7mm PRC brass chamber more consistently in rifles cut to SAAMI minimum dimensions.
• Bench Rest series design: Built as part of Forster’s precision-oriented die family, this die is intended for reloaders who want repeatable case preparation and tighter control over ammunition uniformity.
• Steel construction: A steel die body stands up to repeated loading sessions and maintains its working surfaces over time, which matters when processing rifle brass in larger batches.
• Standard 7/8"-14 thread: Fits common reloading presses, making it easy to integrate into an existing bench setup without special adapters or proprietary hardware.
• 7mm PRC-specific chambering: Matched to 7mm PRC with a .284 in / 7.21 mm bullet diameter, giving reloaders a caliber-correct sizing solution for modern long-range rifle cartridges.

About the Bench Rest Series

Forster Bench Rest dies are built for reloaders who want more control over ammunition consistency than basic utility dies typically provide. Within the Forster lineup, the Bench Rest series sits as a precision-focused option for shooters loading for hunting rifles, target rifles and other applications where uniform chambering and repeatable cartridge geometry matter. The series is known for combining straightforward setup with close manufacturing tolerances, so the dies remain practical for regular bench use while still serving more accuracy-minded handloaders.

In this family, the emphasis is on keeping case and bullet alignment under control through each stage of the loading process. Full-length sizing models are intended to return fired brass to dimensions suited for reliable rechambering, while companion seating dies in the same series are designed around straight-line bullet seating principles. That makes the Bench Rest range a natural fit for reloaders who want dependable function in the field without giving up the consistency expected from precision reloading equipment. The mechanical philosophy is simple: durable steel construction, standard press compatibility and geometry intended to support repeatable case preparation across many loading cycles.

About the Forster Full Length Sizing Die 7mm PRC, Bench Rest

The Forster Full Length Sizing Die 7mm PRC, Bench Rest is a single rifle die made for reloaders who need fired 7mm PRC cases brought back to usable dimensions for smooth, dependable chambering. As a full-length sizing die, it works on the case neck, shoulder and body rather than only one portion of the brass. In practice, that makes it especially useful for ammunition that must feed and chamber reliably in hunting rifles or in rifles that see repeated firing cycles where brass dimensions gradually grow away from chamber-friendly tolerances.

This die also performs decapping during the sizing operation, streamlining brass preparation by combining two essential steps into one press stroke. Because it is built as a standard, non-bushing design, setup remains straightforward for reloaders who prefer a conventional sizing workflow instead of tuning neck tension through interchangeable bushings. The steel construction supports long service life and stable operation under repeated use, while the 7/8"-14 thread ensures compatibility with the wide range of presses already found on most loading benches.

For the 7mm PRC cartridge, where consistent case dimensions are important for both reliable field ammunition and carefully assembled long-range loads, a dedicated full-length die like this helps establish a uniform starting point before priming, charging and seating. The result is a practical tool for reloaders who want repeatable sizing, efficient brass processing and a die that fits naturally into a precision-oriented rifle loading routine.

About Forster

Forster Products traces its history to 1935 and is based in Lanark, Illinois. The company states that its products are made in the United States, and it is widely associated with precision tools for handloading and gunsmithing. Its core expertise centers on equipment such as reloading dies, case trimmers, headspace gauges and sight-mounting fixtures, giving it a strong reputation among reloaders who value repeatable setup and mechanical consistency.

Within the reloading category, Forster is especially known for products such as the Co-Ax Press and its Bench Rest die lines. The company’s Bench Rest Seater Dies are built around a close-fitting chamber concept that helps align the case and bullet during seating, reflecting the same precision-first approach seen across its die range. That focus on practical accuracy tools makes Forster a well-established name for rifle reloaders assembling ammunition for both field and target use.

Main Features

• Manufacturer: Forster
• Made in: USA
• Die operation: Decapping, Full length sizing
• Pack size: Single
• Die type: Standard
• Bushing: No
• Case body design: Bottle neck
• Case type: Rifle
• Sizing die material: Steel
• Material: Steel
• Adjustment: Standard
• Press compatibility: Standard 7/8"-14 thread
• Bullet Diameter (mm): 7.21 mm
• Bullet Diameter (inch): 284.00 inch
• Compatible caliber: 7mm PRC

Warranty

Forster lists a 2-year warranty for this product.