EAW Pair of Standard Steel Rings for Roll-Off Mounts, 25.4 mm

• Steel ring construction: The all-steel build gives these standard rings the rigidity needed to keep a riflescope securely aligned on a roll-off mount, helping maintain repeatable positioning through regular use.
• 25.4 mm / 1 inch fit: Sized for classic 1 inch scope tubes, these rings let older hunting optics and many traditional riflescopes be matched to an EAW roll-off mounting system without improvised adapters.
• EAW Ø 7 mm interface: Built for the EAW Ø 7 mm connection, the rings integrate correctly with compatible upper mount components, which is essential for proper seating and dependable lock-up.
• KR 0.0 mm standard extension: The neutral extension keeps the setup straightforward when no forward or rearward offset is required, making it suitable for conventional scope positioning on compatible rifles.
• Made in Germany: German manufacture reflects EAW’s long-standing focus on precise mount components, which matters in practice because fit and machining quality directly affect mounting consistency.

About the EAW Spare Parts Series

EAW Spare Parts covers the replacement components and workshop aids that support the company’s professional mounting systems. The series is built around the idea that a mount should remain serviceable over time, so users can replace individual parts, maintain existing assemblies, and adapt proven setups instead of replacing the whole system. Within this range, EAW includes parts for pivot mounts, slide-on and roll-off mounts, and claw mounts, along with practical tools intended for fitting and maintenance.

That makes the series especially relevant for gunsmiths, experienced hunters, and shooters who rely on established EAW mounting solutions and want to keep them working to the same standard. The catalog includes small but important components such as clamps, stop bolts, springs, support screws, and ring-clamping screws, as well as mounting aids designed to simplify installation work and reduce the risk of marking an optic. In practical terms, the EAW Spare Parts family is less about adding features and more about preserving compatibility, fit, and repeatable function across EAW’s modular mount designs.

About the EAW Pair of Standard Steel Rings for Roll-Off Mounts, 25.4 mm

The EAW Pair of Standard Steel Rings for Roll-Off Mounts, 25.4 mm is a purpose-built upper mounting component for shooters using a compatible EAW roll-off mount with a riflescope that has a 25.4 mm (1 inch) main tube. This format remains common on many traditional hunting scopes, so these rings are a practical choice when building or restoring a classic rifle-and-optic combination around the EAW system.

The key advantage here is not complexity but correct integration. The rings are made from steel, which gives them the stiffness and wear resistance expected from a mount part that must hold optic alignment securely over repeated fitting and removal. On a roll-off mount, precise contact surfaces matter, and a properly matched ring set helps the scope sit consistently and clamp evenly. That is especially important when the goal is dependable return to position and a stable sight picture rather than frequent experimentation with different optics.

The KR 0.0 mm extension indicates a standard, non-offset configuration, which suits rifles where the optic already falls into the right eye-relief position without needing additional forward or rearward movement. Finished in black and built for the EAW Ø 7 mm interface, this pair of rings is best understood as a clean, correct-fit solution for maintaining the function and geometry of an existing EAW roll-off mounting setup.

About EAW

Ernst Apel founded the company in Würzburg, Germany, in 1919. In 1923, he acquired Elektro-Dental-Werke Frankfurt and changed the EDW brand to EAW, meaning Ernst Apel Würzburg. The company developed and produced its first riflescope mounts in 1945, and since 1951 mount development and production have been its primary focus.

Today, EAW is known above all for German-made mounting solutions for sporting and professional firearms. Its range includes pivot, slide-on or roll-off, and claw mounts for riflescopes, alongside related spare parts and tools, and it also offers thermal imaging cameras. Production moved from Würzburg to Gerbrunn in 1970, and Ernst Apel GmbH is now headquartered in Eibelstadt, Germany. In this product category, EAW’s reputation rests on long-term specialization in precise, durable scope-mount engineering.

Main Features

• Manufacturer: EAW
• Mount series: EAW Spare Parts
• Made in: Germany
• Material: Steel
• Extension (KR): KR 0.0 mm
• Scope / Sight type: 25.4 mm - 1"
• Bubble level: No
• Color: Black
• Compatibility Above: 25.4 mm (1 inch)
• Compatibility Below: EAW Ø 7 mm Interface

Warranty

EAW states a 30-year warranty for its mounts and mount parts. For this pair of standard steel rings, that means long-term coverage consistent with EAW’s mount-component range.