Dentler Dural Pair of Rings, 30 mm

• 30 mm scope fit: Built for riflescopes with a 30 mm main tube, these rings provide the correct interface for a secure, properly aligned installation on a compatible Dentler mounting rail.
• Aluminum construction: The aluminium body keeps weight down without giving up the rigidity needed for a stable optic setup, which helps preserve the handling balance of a hunting rifle.
• Modular BASIS compatibility: Designed for the Dentler BASIS ecosystem and compatible with several Ø 8 mm interfaces, the rings make it easier to configure an optic around an existing modular mount standard.
• KR 0.0 mm extension: The 0.0 mm extension keeps the optic in a neutral ring position, which suits straightforward mounting layouts where no additional forward or rearward offset is required.
• Matte black finish: The black matte surface gives the rings a discreet appearance and reduces distracting reflections on a rifle used in the field.

About the Dentler Dural Rings Series

Dentler Dural Rings are individual ring components made for the Dentler BASIS mounting system, giving shooters a ring-style solution within the company’s modular optic-mounting platform. In the Dentler lineup, this series serves users who prefer conventional scope tube mounting rather than proprietary rail interfaces, while still wanting the flexibility of the BASIS and BASIS VARIO concept. The series is intended primarily for hunting optics setups where repeatable installation, straightforward interchangeability and a clean mechanical fit matter as much as the optic itself.

These rings are built from aluminum, which keeps the mounting assembly lighter than comparable all-steel solutions and makes them well suited to practical field rifles. Dentler offers the Dural ring concept across several common tube diameters, including 25.4 mm, 30 mm, 34 mm, 36 mm and 40 mm, so the series covers a wide range of traditional riflescopes. As part of the broader BASIS family, the rings are meant to work with ring-compatible mounting rails that lock into Dentler’s base system with a repeatable, play-free engagement. That design philosophy makes the series especially relevant for shooters who want a modular mount that remains precise while allowing optics to be configured around different rifles or mounting interfaces.

About the Dentler Dural Pair of Rings, 30 mm

The Dentler Dural Pair of Rings, 30 mm is a dedicated upper mounting component for riflescopes with a 30 mm main tube. It is intended for shooters building or replacing the ring section of a Dentler-compatible optic mount, especially where a classic ring-held scope is preferred over rail-based scope bodies. In practical terms, this makes the pair a sensible choice for many hunting rifles fitted with European-style variable scopes, where a 30 mm tube is one of the most common formats.

The use of aluminium is important here because it reduces unnecessary mass at the top of the rifle. A lighter upper assembly helps maintain more natural rifle balance and avoids making the optic package feel overly top-heavy during carrying, mounting and offhand shooting. The KR 0.0 mm extension keeps the geometry neutral, which is useful when the scope already offers the right eye-relief position and no extra offset is needed from the rings themselves.

Compatibility is a key part of this model’s value. These rings are designed to work with Dentler Ø 8 mm interfaces as well as compatible Henneberger, MAK, Kozap, Mauser and Recknagel Ø 8 mm interfaces, making them relevant for users working within established modular mounting standards. The matte black finish completes the package with a subdued appearance that matches modern riflescopes and avoids bright reflections in the field.

About Dentler

Dentler Jagdwaffen was founded in 2011 by Daniel Dentler and is based in Leutkirch im Allgäu, Germany. The company focuses on modular riflescope mounting systems for hunting firearms, with its best-known platforms being BASIS and BASIS VARIO. Dentler’s approach centers on separating the firearm-specific base rail from the interchangeable optic mounting rail, allowing users to configure optics more flexibly across different rifles and sight types.

Within this category, Dentler is particularly known for mounts that support a broad range of optic interfaces, including formats from brands such as Aimpoint, Pulsar, Swarovski and Zeiss as well as Weaver/Picatinny solutions. The company also lists base rails for firearms from makers including Benelli, Browning, Merkel, Heckler & Koch and Rößler. That specialization has given Dentler a clear reputation in the hunting optics segment: practical, modular mounting systems designed around repeatable fit, adaptable configuration and German-made production.

Main Features

• Manufacturer: Dentler
• Series: Dentler Dural Rings
• Made in: Germany
• Material: Aluminium
• Extension (KR): KR 0.0 mm
• Scope / sight type: 30 mm
• Color: Black - Matte
• Compatibility above: 30 mm
• Compatibility below: Henneberger Ø 8 mm Interface
• Compatibility below: MAK Ø 8 mm Interface
• Compatibility below: Kozap Ø 8 mm Interface
• Compatibility below: Mauser Ø 8 mm Interface
• Compatibility below: Recknagel Ø 8 mm Interface
• Compatibility below: Dentler Ø 8 mm Interface

Warranty

Dentler states a 30-year warranty for this product. This long coverage period suits a mounting component intended for long-term use as part of a modular riflescope setup.