INNOmount QD Two-Piece Mount for Weaver/Picatinny, Pulsar Talion

• Quick-detach operation: The INNOmount QD system uses a tool-free clamping design, so the optic can be removed or reattached quickly when switching between setups or transporting the rifle.
• Repeatable mounting concept: Built as a repeatable mount, it is intended to return the optic to the same position after removal and refitting when correctly adjusted on a level base.
• Pulsar Talion interface: The upper interface matches the Pulsar Talion mounting standard, making it a practical choice for fitting compatible thermal optics to a Weaver or Picatinny-equipped rifle.
• Two-piece construction: The separate front and rear mounting elements keep the setup compact and adaptable on rifles with Picatinny or Weaver rails.
• Aluminium body: The aluminium construction keeps weight under control while providing the rigidity needed for field use on hunting and thermal setups.

About the INNOmount QD Mounts Series

INNOmount QD Mounts are the quick-detach branch of the manufacturer’s mount range, developed for shooters who want a fast way to move optics between rifles or remove them for transport without turning the process into a workshop job. The series covers a broad spread of rifle-side interfaces, including Weaver/Picatinny, Blaser, Tikka T3/T3x and 12 mm prism bases, and it also spans different optic-side formats from conventional rings to rails and dedicated interfaces for thermal and digital sights.

A defining feature of the series is the two-button QD mechanism, which operates recessed locking levers. In practice, this gives the mount a cleaner exterior and helps guard against unintentional opening while still allowing quick, tool-free handling. The range is aimed at both day optics and thermal imaging or digital optics, so the design philosophy focuses on secure attachment, low build height and repeatable positioning rather than on one single sight category. For hunters and users of specialist optics, that makes the series especially useful where one rifle may serve with different sighting systems over the course of a season.

About the INNOmount QD Two-Piece Mount for Weaver/Picatinny, Pulsar Talion

The INNOmount QD Two-Piece Mount for Weaver/Picatinny, Pulsar Talion is built for shooters who need to place a Pulsar Talion-pattern thermal optic on a rifle equipped with a Weaver or Picatinny rail. Its role is straightforward but important: it provides the correct interface between the rifle and the optic while preserving the fast handling expected from a quick-detach system. That makes it well suited to hunting rifles and other setups where a thermal device may be fitted only when needed, then removed again for storage, transport or a return to another sighting system.

The two-piece layout keeps the mount compact and avoids the bulk of a larger one-piece bridge, which can be useful on rifles where rail space, balance or access around the action matters. Because it is a repeatable mount, it is intended for users who value consistent repositioning after removal and refitting, provided the mount is correctly adjusted and the base is properly aligned. In practical use, that matters when a thermal optic is not left on the rifle permanently.

The aluminium construction supports that role well by combining rigidity with moderate weight, and the black finish keeps the mount visually discreet on modern rifle and thermal setups. As part of the INNOmount quick-detach family, this model emphasizes fast attachment, secure clamping and compatibility with the widely used Weaver/Picatinny platform, while its Talion-specific upper interface keeps installation straightforward for the intended optic standard.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, based in Fuchsstadt, Germany. The company manufactures hunting rifles, riflescope mounts and red-dot sights at its Fuchsstadt site, which places the brand firmly in the field of practical shooting and hunting equipment rather than generic accessories. Within the INNOmount range, the company offers quick-clamping and fixed mounts, along with tactical, swing and tilt-up designs for different rifle and optic combinations.

The brand’s catalogue also reflects a broad approach to compatibility. INNOmount products are available for Weaver/Picatinny rails as well as several rifle-specific mounting bases, and the line includes scope rings in common diameters such as 25.4 mm, 30 mm, 34 mm and 35 mm. That breadth is relevant here because it shows the brand’s focus on solving real mounting problems across both conventional optics and specialist sighting systems.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount QD Mounts
• Made in: Germany
• Mounting standard: Pulsar Talion
• Base interface: Weaver/Picatinny
• Color: Black
• Material: Aluminium
• Mount type: Two-piece quick-detach repeatable mount
• Compatibility above: Pulsar Trail Mounting Standard, Pulsar Talion Mounting Standard
• Compatibility below: Picatinny Rail, Accuracy International AX308, Accuracy International AX50, Accuracy International AXMC, Accuracy International AT308, Anschutz 1771, Anschutz 1782, Baikal 121 Lis, Baikal 145 Los, Baikal 141 Sobol, Baikal 161 Manul, Benelli Lupo (weaver), Beretta ARX 100, Beretta ARX 160, Beretta ARX 200, Beretta Rx4 Storm, Beretta Cx4 Storm, Beretta BRX1 (Picatinny), CZ 512 Tactical, CZ 557 Varmint, CZ 557 Range Rifle, CZ 600 Trail, CZ 600 Alpha (Mini)

Warranty

2 years. This mount is covered by a two-year manufacturer warranty.