OPTIC FEATURES
AUTOLIVE®
Our motion-sense technology, AutoLive, greatly extends your battery life when storing optics with active illumination.
MULTI-COATED LENS
Our Multi-Coated Lenses are treated with a special finish to reduce reflections and increase light transmission.
PUSH BUTTON CONTROLS
With Push Button Controls, you can easily adjust your optic’s power and illumination settings in seconds.
RED DOT BRIGHT™
This badge is reserved for scopes with the brightest reticle illumination, comparable to the highest settings on a red dot sight.
SHOCKPROOF
Our Shockproof optics are reinforced against impact, capable of facing the rigors of duty use.
WATERPROOF
Our Waterproof optics are sealed for reliable function, even when fully submerged in water.
SCAN TO SEE MORE PRIMARY ARMS OPTICS FEATURES
CLASSIC SERIES MINI REFLEX SIGHT G2
HOW TO ACHIEVE A CLEAR RETICLE PICTURE
If you wear prescription glasses or contact lenses, make sure to put them on before looking through the ight. To achieve a clear, crisp dot, look through the sight and focus on the target, not the dot. Shoot with both eyes open! It can also be helpful to turn the dot’s brightness down a bit, until the dot can just be seen clearly contrasted against the background.
HOW TO SET RETICLE ILLUMINATION
There are two buttons on the optic’s left side. The forward button is marked with an up arrow, and the rear button is marked with a down arrow. To turn the optic on, press either button and hold it for three seconds. This activates the reticle. To increase the reticle brightness, tap the ‘up’ button. To ecrease reticle brightness, tap the ‘down’ button. To turn the optic off, press BOTH buttons and hold for three seconds. This deactivates the reticle.
NOTE: If the reticle does not appear, you may need to replace the battery. To do this, unscrew the optic and remove it from its mounting position. emove the old battery and insert a new CR2032 battery in its place. You may then reinstall the optic on your firearm or mount.
ZEROING
The optic is delivered in a centered position. Normally, this means that only small adjustments are necessary, providing that the base is properly aligned. If you have a red dot magnifier, sight in without using the magnifier. Work your way to “zero” by adjusting each turret in small increments.
a. To move the point of impact to the right, turn the windage adjustment screw clockwise.
b. To move the point of impact to the left, turn the windage adjustment screw counter clockwise.
c. To move the point of impact up, turn the elevation adjustment screw clockwise
d. To move the point of impact down, turn the elevation adjustment screw counter clockwise.
The total adjustment range for both windage and elevation is 60 MOA. If you suddenly encounter resistance, do NOT try to force the screw further, this can break the mechanism and render the sight unable to zero. Confirm zero by firing at least three shots at a zeroing target. After initial firing, heck that the optic and mount are secure on your firearm. Check your impact points on the target to confirm accuracy and repeat until you are satisfied that the point of aim and the point of impact coincide at your desired range.
MOUNTING OPTIONS
The Classic Series Mini Reflex Sight G2 is designed to work with RMR-compatible Footprints.
DOT SIZE
The Classic Series Mini Reflex Sight G2 features a 3 MOA dot, meaning that the dot itself appears to cover roughly 3 inches of target at 100 yards. The 3 MOA dot offers an excellent compromise of both speed and accuracy.
REMEMBER: THE FOUR RULES OF FIREARMS SAFETY
- Treat every firearm as if it were loaded.
- Never let your muzzle cover anything you are not willing to destroy.
- Keep your finger off the trigger until your sights are on target.
- Be sure of your target and what is behind.
FEATURES
- 10 Brightness Settings
- Bright LED with Lowlight and Daytime Settings
- AutoLive® Illumination Technology
- Up to 40,000-hour Battery Life at Medium Settings
- RMR Footprint
- 24x17mm Clear Aperture in a Compact and Light Weight Design
- Tough 6061 Aluminum Alloy Housing
- Multi-Coated Lens
- Backed by Primary Arms Optics Lifetime Warranty
| SPECIFICATIONS | ||
| Objective Lens Diameter: 24x17mm | T otal Elevation Adjustment: > 60 MOA | Illumination Settings: 10 Settings |
| Length: 1.78 in. | Total Windage Adjustment: > 60 MOA | Battery Life: 40k Hours at Medium Setting |
| Weight: .98 oz | Lifetime Warranty | Battery: 3v CR 2032 |
LENS CARE
Please do not use any organic solvent such as alcohol or acetone on your optic. First, blow dust or any foreign objects off of the lens. Then, use a soft cotton or microfiber lens cloth to clean any fingerprints or smears off the lens. Alternatively, you may use a piece of professional lens paper for further cleaning, if necessary.
WARNING: Always ensure your firearm is unloaded (chamber empty and magazine removed) before installing optics or accessories.
WARNING: Improper installation of firearm parts or accessories may result in death or serious personal injury. If you are not properly trained in the installation of these parts, have them installed by a gunsmith or armorer.
- Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
- Even used batteries may cause severe injury or death.
- Call a local poison control center for treatment information.
- Non-rechargeable batteries are not to be recharged.
- Do not force discharge, recharge, disassemble, heat above (manufacturer’s specified temperature rating) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
- Ensure the batteries are installed correctly according to polarity (+ and -).
- Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
- Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.