Redding Type S-Match Neck Die Set .22-250 Remington

• Type S bushing neck sizing system: Sizes only the case neck and lets the fire-formed body remain matched to the chamber, which helps support concentric ammunition and consistent bullet release for precision .22-250 Remington loads.
• Interchangeable neck-tension setup: The Type S design uses interchangeable bushings so neck tension can be tuned to brass thickness and bullet choice, giving the handloader finer control over seating feel and load consistency.
• Three-die match configuration: By combining a Type S Bushing Neck Die, a Body Die and a Competition Seating Die, this set covers routine neck sizing, periodic body sizing and precise bullet seating in one coordinated package.
• Micrometer seating adjustment: The Competition Seating Die uses micrometer-style adjustment for repeatable seating-depth changes, which is especially useful when refining loads for different bullets or jump settings.
• Standard press fit and steel construction: The 7/8"-14 thread fits common reloading presses, while the steel die bodies provide the rigidity and durability expected for frequent bench use.

About the Type S Series

Redding Type S dies are built for handloaders who want more control over case preparation than conventional fixed-dimension sizing dies provide. In Redding’s lineup, the Type S series sits squarely in the precision reloading category, aimed at shooters who tune ammunition for accuracy, low runout and consistent neck tension rather than simply producing functional rounds in volume.

The defining feature of the series is the interchangeable bushing system, which allows the neck sizing dimension to be selected by the user instead of being fixed by the die itself. That makes the series especially useful for reloaders working with turned necks, mixed brass lots or carefully developed match loads. Depending on the die set, the Type S concept is paired with either conventional seating dies or Competition Seating Dies, and with neck-sizing or full-length sizing formats to suit different rifles and loading routines.

Across the family, the emphasis is on repeatable case alignment, controlled brass working and modular setup. For bolt-action rifle cartridges in particular, Type S dies appeal to precision shooters and varmint hunters who want to balance chamber fit, brass life and seating consistency while keeping the loading process adaptable.

About the Redding Type S-Match Neck Die Set .22-250 Remington

The Redding Type S-Match Neck Die Set .22-250 Remington is configured for reloaders who want the flexibility of bushing-controlled neck sizing together with the finer seating control of a match-style seating die. For a cartridge such as .22-250 Remington, often chosen for varmint shooting and other accuracy-focused rifle work, that combination makes sense: the die set supports careful tuning of neck tension and seating depth without forcing the user into a one-size-fits-all approach.

The heart of the set is the Type S - Bushing Neck Die, which sizes the neck while allowing the use of interchangeable bushings. In practice, that means the reloader can tailor neck grip to brass condition and bullet selection instead of overworking every case. Because only the neck is routinely sized, the case body can remain closely fitted to the rifle’s chamber, which can help maintain alignment and reduce unnecessary brass stress over repeated firings.

Redding pairs that die with a Body Die, an important part of the set because it gives the user a controlled way to resize the case body and adjust shoulder position when chambering starts to tighten. This preserves the advantages of neck sizing while still giving a practical path to restore easy bolt closure. The Competition Seating Die adds micrometer adjustment for precise, repeatable seating-depth changes, making load development more systematic when testing different bullets or jump settings. With its steel construction and standard 7/8"-14 thread, the set is built for regular use on common single-stage or turret presses.

About Redding

Redding Reloading Equipment was founded by Burr Bement in 1946 in Virgil, New York. The company focuses on tools for handloading ammunition, with product lines that include reloading dies, presses, powder measures, scales and case-preparation equipment. That long specialization in reloading is a major reason Redding remains closely associated with precision-oriented bench equipment rather than general shooting accessories.

Within the rifle-die category, Redding is especially known for products such as Type S bushing dies and Competition series dies, both of which are aimed at reloaders who want tighter control over neck tension, case alignment and seating depth. The company was incorporated as Redding-Hunter, Inc. in 1956, and it later expanded through acquisitions including SAECO in 1986 and Imperial Lubricants in 2005. Today, Redding is headquartered in Cortland, New York.

Main Features

• Manufacturer: Redding
• Made in: USA
• Compatible caliber: .22-250 Remington
• Pack size: 3 die set
• Die type: Bushing
• Bushing style: Type S - Bushing Neck Die
• Die operation: Body sizing, Bullet seating, Decapping, Neck sizing
• Case body design: Bottle neck
• Case type: Rifle
• Adjustment: Micrometer
• Press compatibility: Standard 7/8"-14 thread
• Sizing die material: Steel
• Material: Steel
• Bullet diameter: 5.69 mm
• Bullet diameter: 204.00 inch

Warranty

Redding provides a 2-year warranty for this die set.

In the Box

• Type S Bushing Neck Die
• Body Die
• Competition Seating Die