INNOmount ZERO for Blaser, Pulsar Trail 2

• Blaser-specific fit: This INNOmount ZERO mount is built for the Blaser mounting standard, giving Blaser owners a direct, model-matched interface that keeps installation straightforward and avoids improvised adapter setups.
• Pulsar Trail 2 interface: The upper side is configured for Pulsar Trail2 / Digisight Ultra N450 & N455, so compatible thermal and digital optics can be mounted securely with the correct footprint and alignment.
• Repeatable detachable design: As part of the INNOmount quick-detach concept, the mount is made for fast removal and reinstallation, which is valuable when one optic is shared between rifles or when a device must be removed for transport.
• ZERO system concept: The ZERO version is intended for shooters who want a mount that supports consistent return-to-zero behavior, helping preserve practical point-of-impact repeatability after the optic has been taken off and fitted again.
• Aluminium construction: The aluminium body keeps weight under control while still providing the rigidity needed for hunting and field use, especially on rifles that are carried over long distances.

About the INNOmount One-Piece Mounts Series

INNOmount One-Piece Mounts sit within the brand’s quick-detach mounting range and are closely associated with the company’s tilt-up mount family. The series is built around the idea of giving rifle users a compact, repeatable mounting solution that can be removed quickly without tools, making it well suited to hunters and shooters who change optics between rifles or swap between daytime and electro-optic sights. A key part of the concept is the brand’s thumb-operated release system, which uses recessed locking levers for fast handling while keeping the exterior clean and snag-resistant.

Across the series, INNOmount offers one-piece variants for both Weaver/Picatinny platforms and rifle-specific bases, alongside versions for ring-mounted scopes and rail-equipped optics. The family also covers interfaces for digital and thermal devices, which makes it broader than a conventional scope-mount line. The design philosophy focuses on low build height, solid clamping and repeatable positioning, so the mount supports practical field use rather than adding unnecessary bulk. In use, the series is aimed at shooters who value a secure mechanical connection, fast handling and a mounting format tailored to the optic and rifle rather than a one-size-fits-all solution.

About the INNOmount ZERO for Blaser, Pulsar Trail 2

INNOmount ZERO for Blaser, Pulsar Trail 2 is a dedicated one-piece mount for pairing compatible Pulsar Trail2 / Digisight Ultra N450 & N455 optics with rifles that use the Blaser mounting standard. That model-specific layout matters in practice because it gives the optic the correct mechanical interface at both ends of the mount: the upper side matches the Pulsar device family, while the lower side is shaped for Blaser-pattern rifles and related compatible platforms. The result is a cleaner, more secure installation than a generic adapter-based setup.

The ZERO designation is especially relevant for users of thermal and digital hunting optics, where the ability to remove the sight and reinstall it with dependable alignment is a real field advantage. A detachable mount is useful for transport, battery changes, switching between rifles or changing from an electronic sight to a daytime optic, but only if the mount returns to the rifle consistently. Repeatable mounting behavior is therefore the core benefit of this model.

The aluminium construction helps keep the mount practical on hunting rifles that are carried for long periods, while still providing the stiffness expected from a one-piece body. The mount is also specified as non-windage adjustable, which simplifies the design and keeps the focus on a solid, direct fit between rifle and optic. For Blaser users running Pulsar Trail 2 or compatible Digisight Ultra devices, this mount is a purpose-built solution for stable attachment, fast handling and efficient optic changes in the field.

About INNOmount

INNOmount is a mount brand presented by INNOGUN GmbH & Co. KG, a German company based in Fuchsstadt, Germany. INNOGUN manufactures hunting rifles, rifle-scope mounts and red-dot sights at its Fuchsstadt site, which places the brand firmly in the field of hunting and shooting equipment rather than general accessories. Within the INNOmount range, the company offers both quick-clamping and fixed rifle mounts, with versions for Weaver/Picatinny rails as well as numerous rifle-specific mounting bases.

The product line also extends across several mount types, including tactical, swing and tilt-up mounts, showing a strong focus on matching the mounting system to the rifle and optic rather than forcing a universal pattern. INNOmount also covers common scope-ring diameters such as 25.4 mm, 30 mm, 34 mm and 35 mm, which reflects the brand’s emphasis on compatibility across traditional riflescopes, red dots and modern digital or thermal sights.

Main Features

• Manufacturer: INNOmount
• Series: INNOmount One-Piece Mounts
• Made in: Germany
• Mount type: One-piece detachable mount
• Rifle interface: Blaser Mounting Standard
• Optic interface: Pulsar Trail Mounting Standard
• Compatible optics: Pulsar Trail2 / Digisight Ultra N450 & N455
• Windage adjustable: No
• Material: Aluminium
• Compatible platforms: Blaser BB 97, Blaser R8, Blaser R93, Blaser BBF 95, Blaser BBF 97, Blaser BD 14, Blaser BS 97, Blaser D99, Blaser K95, Blaser S2, Blaser BS 95, Sauer 505, Jakele J1

Warranty

10 years. This mount is covered by a ten-year warranty period, giving long-term support for a component that is expected to maintain secure, repeatable optic attachment over extended field use.