EAW Front Base For 11 mm Dovetail

• 11 mm dovetail fit: This front base is made for rifles and rimfire actions with an 11 mm dovetail, giving a clean, direct mounting interface without adding unnecessary bulk.
• Part of the EAW Roll-off system: Designed for Models 134, 135, 136, 234, 1234, 2234 and 3234, it forms the front contact point of a removable mount setup, helping maintain a practical scope installation on lighter firearms.
• Steel construction: The steel body provides the rigidity needed at the mounting interface, which matters for long-term fit, repeatable positioning and resistance to wear from repeated installation.
• 11.00 mm base height: The specified BH 11.00 mm height supports correct mount geometry within the system, helping align the optic properly with the rear base and the rifle’s receiver profile.
• 0 MOA inclination: With 0 MOA built in, this base keeps the setup neutral, which suits general sporting and rimfire applications where a straightforward optical alignment is preferred.

About the EAW Roll-off Mounts Series

EAW Roll-off Mounts sit in the manufacturer’s range as a practical alternative to its pivot mounts, aimed at lighter firearm setups where a removable scope mount is still desirable. The series includes one-piece and two-piece designs and is used on air rifles, small-calibre shotguns and rifles with integrated cylindrical or conical dovetails. That makes the family especially relevant for rimfire and light sporting rifles that need a compact, mechanically simple mounting solution.

A defining characteristic of the series is that the mount can be removed and reattached, which is useful when a rifle alternates between open sights and an optic or when transport demands a lower profile. Depending on the model, the range includes fixed versions or lever-lock variants for repeatable attachment, and it covers both Picatinny and dovetail interfaces. Some versions also use pivot-mounted rings or prisms with side support. In practice, the series is built around straightforward handling, sensible weight and compatibility with smaller sporting firearms rather than the heavier architecture of large centrefire hunting mounts.

About the EAW Front Base For 11 mm Dovetail

The EAW Front Base For 11 mm Dovetail is a dedicated front sub-base for the EAW Roll-off Mounts system, intended for rifles that use an 11 mm dovetail receiver interface. As the front element of the mount, it provides the locating point that allows the upper assembly to sit correctly in relation to the rifle and the matching rear component. This makes it an important part for restoring, replacing or building a complete EAW mounting setup on compatible rimfire and light sporting platforms.

Its steel construction is well suited to a component that must hold its shape and resist wear at the contact surfaces over repeated use. For a mount base, that matters more than cosmetic refinement: a stable front interface helps the complete system seat consistently and supports dependable optic alignment. The 11.00 mm BH height is equally important because roll-off mounts rely on the correct geometry between front and rear sub-bases. Keeping that geometry correct helps avoid unnecessary mounting stress and supports proper scope position.

With 0 MOA inclination, this base is configured for neutral alignment rather than built-in elevation bias, which suits common rimfire, training and light sporting applications. It is specified for use with Models 134, 135, 136, 234, 1234, 2234 and 3234, making it a model-specific spare part rather than a universal base. For shooters using Anschutz, CZ and other compatible 11 mm dovetail rifles, it provides the correct front foundation for an EAW roll-off mount installation.

About EAW

EAW was founded by Ernst Apel in Würzburg, Germany, in 1919. The company produced its first riflescope mounts in 1945, and since 1951 mount development and production have been its main focus. That long concentration on scope mounting systems explains why EAW is closely associated with mechanically precise solutions for sporting and specialist firearms.

Over time, the company expanded from Würzburg to Gerbrunn in 1970, and Ernst Apel GmbH is now headquartered in Eibelstadt, Germany. EAW is known for making pivot, slide-on or roll-off, and claw mounts for riflescopes, and it has also added thermal imaging products and, more recently, tactical mount lines. In this category, its reputation rests on dedicated fit, model-specific engineering and a product range that covers both complete mounts and the individual sub-components needed for precise installation.

Main Features

• Manufacturer: EAW
• Series: EAW Roll-off Mounts
• Made in: Germany
• Material: Steel
• Colour: Black
• Base height: 11.00 mm
• Inclination: 0 MOA
• Compatibility: Accuracy International AW, Anschutz 54, Anschutz 64, Anschutz 1761, Anschutz 1770, Anschutz 54.30, Anschutz 1727 F, Anschutz 1827 F, CZ 452 (11 mm), CZ 452 (3/8"), CZ 453 (11 mm), CZ 511, CZ 512, CZ 513, CZ 455, CZ 457, Erma Werke M1, FN Browning T-Bolt (with dovetail), Grünig + Elmiger Supertarget 200, Keppeler Sporting Rifles, Kettner Luger Rimfire, Kimber 82 (Dovetail), Kimber 84, Krico 300, Krico 400

Warranty

EAW provides a 30-year warranty for this mount base. That long coverage period matches the product’s role as a durable steel mounting component intended for long-term use within a model-specific scope mounting system.

In the Box

• EAW Front Base For 11 mm Dovetail