Dentler Steel Ring, 34 mm

• Steel construction: The ring is made from steel, giving the mounting interface the rigidity and wear resistance needed for repeated optic installation and removal without quickly loosening or deforming.
• 34 mm scope fit: Built for 34 mm riflescope tubes, this upper ring module supports modern optics with larger main tubes, which are often chosen for greater adjustment range and robust mechanical design.
• BASIS system compatibility: As part of the Dentler modular mounting concept, the ring works with BASIS-pattern mounting rails so an optic can remain on its upper assembly and be transferred within the system with consistent positioning.
• KR 0.0 mm configuration: The neutral extension keeps the optic position straightforward within the mount layout, which is useful when the riflescope already offers suitable eye relief on the rifle.
• Matte black finish: The non-reflective black surface suits hunting rifles and practical field use by keeping the mount visually discreet and matching common scope and rail finishes.

About the Dentler Steel Rings Series

Dentler Steel Rings are part of the Dentler BASIS mounting system, a modular platform developed for hunters who want to combine one optic with different rifles or configure several optics around the same mounting standard. Within the series, Dentler offers steel ring modules for 25.4 mm, 30 mm, and 34 mm scope tubes, as well as different mounting heights, so the system can be matched to a wide range of riflescopes and rifle setups.

The series is built around the idea that the optic stays attached to its upper mounting assembly while the mount interfaces with a Dentler BASIS rail. That makes the Steel Rings series especially relevant for traditional hunting optics that use a round main tube rather than a proprietary rail. Dentler positions the BASIS concept as a repeatable, play-free solution, with the mounting rail locking onto the base rail at consistent torque. In practice, that gives the Steel Rings series its main role: a robust steel upper module for shooters who want the familiarity of ring-mounted scopes together with the flexibility of a modular hunting-rifle mounting system.

About the Dentler Steel Ring, 34 mm

The Dentler Steel Ring, 34 mm is an upper mounting component for riflescopes with a 34 mm main tube. That tube size is common on modern hunting and precision-oriented optics that use a larger central tube for stronger mechanics and broader internal adjustment travel. By using a dedicated 34 mm ring module, the mount supports the scope correctly without improvised inserts or compromise at the clamping surface.

This model is made from steel, which suits a scope mount component that must hold alignment under recoil and repeated handling. In field use, steel brings a reassuringly solid interface between optic and mounting rail, especially for rifles that are carried often, exposed to weather, or fitted with heavier day optics. The KR 0.0 mm configuration keeps the extension neutral, making this version suitable where the rifle and scope combination already provides the right eye-relief position without needing the optic shifted forward or rearward.

The ring is intended for use with mounting systems that accept the Ø 8 mm interface, including Dentler as well as Henneberger, MAK, Kozap, Mauser, and Recknagel-compatible lower interfaces listed for this part. Finished in matte black, it integrates cleanly with typical riflescope and rail finishes while keeping reflections low. For hunters building around the Dentler modular concept, this 34 mm steel ring serves as a straightforward, durable way to mount a larger-tube riflescope on a compatible upper assembly.

About Dentler

Dentler Jagdwaffen was founded in 2011 by Daniel Dentler and is based in Leutkirch im Allgäu, Germany. The company focuses on modular riflescope mounting systems for hunting firearms rather than on optics themselves, and it is best known for the BASIS and BASIS VARIO platforms. These systems are built around a firearm-specific base rail and an interchangeable optic mounting rail, allowing the same optic setup to be used within a standardized mounting concept.

Dentler’s reputation in this category comes from its concentration on practical hunting-mount engineering: repeatable attachment, compatibility across many rifle models, and upper assemblies for a broad range of optic formats. The company also offers mounting solutions for brands and interfaces such as Aimpoint, Pulsar, Swarovski, Zeiss, and Weaver/Picatinny, which reflects its emphasis on adaptable, system-based scope mounting for modern hunting rifles.

Main Features

• Manufacturer: Dentler
• Series: Dentler Steel Rings
• Made in: Germany
• Material: Steel
• Extension (KR): KR 0.0 mm
• Scope / sight type: 34 mm
• Color: Black - Matte
• Compatibility above: 34 mm
• Compatibility below: Henneberger Ø 8 mm Interface, MAK Ø 8 mm Interface, Kozap Ø 8 mm Interface, Mauser Ø 8 mm Interface, Recknagel Ø 8 mm Interface, Dentler Ø 8 mm Interface

Warranty

Dentler provides a 30-year warranty for this mount component. That long coverage period fits the product’s role as a durable steel element within a modular riflescope mounting system.