Dentler Base rail BASIS - Anschutz 1780

• Modular BASIS interface: This base rail forms the firearm-specific half of the Dentler BASIS system, letting one compatible upper mounting rail move between rifles while keeping the mounting concept consistent.
• Firearm-specific fit: The underside is shaped for the Anschutz 1780 action family and related platforms, which helps avoid improvised fitting work and supports a secure, repeatable installation.
• Steel construction: The rail is made from steel for the rigidity and wear resistance needed in a mounting component that must hold zero under repeated recoil and repeated optic changes.
• Low 4.00 mm build height: The compact profile helps keep the optic close to the bore, which supports a natural shooting position and can preserve clearance for the rifle's handling characteristics.
• Broad BASIS compatibility: The top side matches Dentler Mounts Interface upper rails, giving the user a flexible route to configure different optics on the same rifle platform.

About the BASIS Series

Dentler BASIS is the company’s core modular mounting system for hunting rifles, built around a simple two-part concept: a firearm-specific base rail stays on the rifle while an optic-specific upper rail stays with the sight. This approach places BASIS in the practical center of Dentler’s lineup, aimed at shooters who want a clean, repeatable way to use different optics without changing the rifle’s underlying setup.

The series is defined by its emphasis on repeatable optic changes, robust steel load-bearing parts, and model-specific geometry that matches the host firearm rather than relying on universal compromise. In use, that means the system is well suited to hunters who alternate between a daytime riflescope, a red dot, or a clip-on-compatible setup depending on season and terrain. BASIS also stands apart from more adjustable systems by focusing on a straightforward, fixed-height interface with broad compatibility across Dentler upper rails. For shooters who want a stable foundation, predictable alignment, and a modular path for future optic changes, the BASIS series is designed as a durable platform rather than a one-rifle, one-scope solution.

About the Dentler Base rail BASIS - Anschutz 1780

The Dentler Base rail BASIS - Anschutz 1780 is a rifle-specific steel base rail made for shooters who want to bring the Dentler modular mounting concept to the Anschutz 1780 platform and related compatible rifles. Its role is straightforward but important: it provides the lower interface that remains on the firearm, creating the connection point for any compatible Dentler Mounts Interface upper rail.

Because this model is tailored to the rifle rather than made as a generic adapter, it suits hunters and sporting shooters who value a mounting solution that integrates neatly with the action geometry. The 4.00 mm BH height keeps the base compact, which helps maintain a low overall mounting position and supports balanced rifle handling. The steel construction is equally significant in practice, as a base rail must resist wear from repeated mounting cycles while remaining rigid enough to support consistent optic alignment.

This version is also a practical choice for owners of compatible rifles such as Anschutz 1781, Haenel SLB 2000+, Heckler & Koch SLB 2000, and Merkel SR 1 Basic. For users building a flexible hunting optics setup, that compatibility matters because it ties the rifle into the wider Dentler BASIS ecosystem. Instead of treating the mount as a fixed, single-purpose part, this rail becomes the foundation for a modular system that can adapt as optic requirements change.

About Dentler

Dentler Jagdwaffen was founded in 2011 by Daniel Dentler and is based in Leutkirch im Allgäu, Germany. The company focuses on modular riflescope mounting systems for hunting firearms, with its best-known platforms being BASIS and BASIS VARIO. In Dentler’s system architecture, BASIS uses a firearm-specific base rail combined with an interchangeable optic mounting rail, giving hunters a structured way to move optics within one mounting standard.

Dentler’s range covers base rails for firearms from brands such as Benelli, Browning, Merkel, Heckler & Koch, and Rößler, and its optic-side rails are offered for formats including Aimpoint, Pulsar, Swarovski, Zeiss, and Weaver/Picatinny. That specialization has given the brand a clear reputation in the hunting optics segment: not for making optics themselves, but for building the mechanical interface that lets rifles and sights work together in a more flexible way.

Main Features

• Manufacturer: Dentler
• Series: BASIS
• Category: Base rail
• Compatible rifles: Anschutz 1780, Anschutz 1781, Haenel SLB 2000+, Heckler & Koch SLB 2000, Merkel SR 1 Basic
• Upper interface compatibility: Dentler Mounts Interface
• Material: Steel
• Color: Black - Matte
• BH height: 4.00 mm
• Dimension A: 21.90 mm
• Dimension B: 98.50 mm
• Dimension C: 15.40 mm / 15.40 mm
• Made in: Germany

Warranty

Dentler provides a 30-year warranty for this base rail. That long coverage period suits a steel mounting component intended for extended field use and repeated optic changes over many seasons.