|Mount series||Rusan Picatinny Bases|
|Suitable for||Steyr Duett, 12 mm dovetail, Antonio Zoli Express, Baikal IZH 18, Baikal IZH 94, Bettinsoli, Brno Combo, Brno Express, F.A.I.R. Combi, Fair / Rizzini Express, Haenel Jager 9, Heym 22 S, Heym B 26, Heym Express, Marocchi Finncl. 512s , Sabatti Express, Valmet 412 S, Valmet Petra|
A, B and C markings refer to the distances between holes on the rail/mount. A is the distance between the front two holes on the rail/mount.
A, B and C markings refer to the distances between holes on the rail/mount. B is the distance between the holes in the middle (usually, that is the distance between the 2nd and 3rd hole on the rail/mount).
A, B and C markings refer to the distances between holes on the rail/mount. C is the distance between the rear two holes on the rail/mount.
BH stands for Bauhöhe (ger.) which means overall height. It is measured from the mounting surface of the rifle to the lower surface of the riflescope's tube.
Often, the elevation adjustment that the riflescope offers is not adequate to compensate for the bullet drop when shooting at long range. When the riflescope runs of out of elevation, a mount with an inclination is needed. 20 MOA is the most common inclination. With it, the user gains 58.2 cm / 100 m of additional elevation range when shooting at the range of 100 m. This is approx. 5.8 Mrad of elevation.