Your location is United States. Wrong location or language? Choose a different one below..
Display language is English.
Your currency is USD.
North America
Your location is United States. Wrong location or language? Click here.

Rusan Picatinny rail - Steyr SSG 69

Videos
Do you need help with this item?
Our experienced team is here to resolve any issues before, during or after you purchase this item. If you have a question don't hesitate to contact us bellow:
Contact us

Rusan Picatinny rail - Steyr SSG 69 Details

Introduction

Picatinny rail consists of slots with 5.23 mm spaces between one another, which means that it can be used across its entire length. It is simple to mount and interchangeable – if something is made for a Picatinny rail, it will fit regardless of the manufacturer or manufacturing date. It is affordable, resilient and reliable – this is why it so commonly used by professionals and military. Because of all its great qualities, Picatinny rail has been dominating the rail market in the recent years.

Picatinny is a big step forward from the Weaver standard. Weaver has a few predesignated slots while Picatinny has slots all over its surface, allowing the device to be mounted wherever the user finds it fitting. Weaver's slot is 3.8 mm wide, which is why all mounts made for Picatinny will also fit on a Weaver rail while those made for Weaver will not fit on a Picatinny rail. This is one of the main reasons why Picatinny is a far better mounting solution.

Rusan, a company from Croatia, is one of the manufacturers of Picatinny rails. They make mounts exclusively from steel and provide buyers with a wide selection of Picatinny rails for various rifles. They are made from high quality deep blue finish steel. Picatinny Rails include screws with appropriate thread for the corresponding rifle. Rusan covers 10 years of warranty for all its products.

About the rifle

Steyr Mannlicher, a renowned company that produces firearms, was founded in 1864 by Josef Werndl. It soon grew into a big company with great production capacity. In 1882, they faced a small crisis because of lack of large orders (they had supplied the European armies with breech loading rifles – demand declined). This is when Werndl used the company's production capacity to manufacture all sorts of products along with firearms: dynamos, electric motors, light bulbs, bicycles, cars, trucks. The company's most active years were without doubt during World War I when more than 4000 firarms were made daily by its 15.000 employees. The company's name was changed to Steyr-Daimler-Puch AG in 1987.

Steyr SSG 69 is a bolt-action rifle, introduced in 1969, that is used as a standard rifle by the Austrian Army. It is known for its great accuracy and durability. Originally, it was chambered exclusively for 7.62x51mm NATO. Later, Steyr Mannlicher started making some models chambered for .243 Win. and .22-250 Rem. SSG 69 is equipped with a standard 5-round rotary magazine. The length is 1140 mm while the weight is 4 kg. The variations that can be found on the market are: SSG 69, SSG 69 PI, SSG 69 PII and SSG 69 PIV. The differences between the models are mainly in the cosmetics, except for the PIV model, which is equipped with a much shorter barrel. There are 6 lugs on the bolt. For mounting purposes, there is a 16.5mm dove-tail on the receiver. The action is push-feed.

Rifles Sako M10, Sako TRG (all models), Steyr SSG 69, Brno Fox, Tikka T3, CZ 527, Brunner 16, Brno ZKM 611 and Brno ZKB 680 have a 16.5 mm dovetail on the receiver for mounting purposes.

Mounting details

A: / (no holes)
B: / (no holes)
C: / (no holes)
BHU: 0 mm
Fi: /
R1: Prisma 16.5
R2: Prisma 16.5

Mounting instructions


Remove all the stains (grease, oil etc.) from the rifle's receiver with a cleaning fluid (acetone). Once the surface is clean and dry, check whether the screws match the rail and the holes on the receiver. Make sure that the Picatinny rail is compatible with the the rifle by inspecting the mounting holes on both. Before mounting the rail permanently, apply a minimal amount of thread-locking fluid 278 or 648 on screws and contact surfaces. Be careful not to get the fluid in or near the mounting holes. Carefully clean the remaining excess fluid around the rail with a cleaning fluid. Using a torque driver, screw the screws appropriately (up to 2.2 Nm) – do not overtighten.

Warranty


The product has a warranty period of 10 years.

Add to Compare Save and send

Rusan Picatinny rail - Steyr SSG 69 Specifications

ManufacturerRusan
SKU010-10
Mount seriesRusan Picatinny Bases
Base typePicatinny
Suitable forTikka T3, 16.5 mm dovetail, Brno Fox, Brno ZKB 680, Brno ZKM 611, Brunner 16.0 mm, CZ 527, Sako M10, Sako TRG 21, 41, Sako TRG 22/42, Steyr SSG 69
A

A, B and C markings refer to the distances between holes on the rail/mount. A is the distance between the front two holes on the rail/mount.

A,B,C distances

/ (no holes)
B

A, B and C markings refer to the distances between holes on the rail/mount. B is the distance between the holes in the middle (usually, that is the distance between the 2nd and 3rd hole on the rail/mount).

A, B, C distances

/ (no holes)
C

A, B and C markings refer to the distances between holes on the rail/mount. C is the distance between the rear two holes on the rail/mount.

A, B, C distances

/ (no holes)
BH height

BH stands for Bauhöhe (ger.) which means overall height. It is measured from the mounting surface of the rifle to the lower surface of the riflescope's tube.

BH height

11 mm
Inclination

Often, the elevation adjustment that the riflescope offers is not adequate to compensate for the bullet drop when shooting at long range. When the riflescope runs of out of elevation, a mount with an inclination is needed. 20 MOA is the most common inclination. With it, the user gains 58.2 cm / 100 m of additional elevation range when shooting at the range of 100 m. This is approx. 5.8 Mrad of elevation.

0 MOA
MaterialSteel
Length149 mm
Warranty10 years
Made inCroatia
ColorBlack
Why should you trust us? We provide you with:

Reviews for Rusan Picatinny rail - Steyr SSG 69

Very Good By
Quality
Price
Value
5
fits perfectly, very good fit and finish and really fast shipping.

(Posted on 07/01/2018)

fits perfectly By
Price
Value
Quality
5
It fits perfectly on my rifle and now I can have the eye relief of my S&B set to the correct length.

(Posted on 08/05/2016)

very good By
Price
Value
Quality
5
every thing was excellent

(Posted on 29/02/2016)

bad design By
Price
Value
Quality
3
many types of rings did not fit on it

(Posted on 03/02/2016)

Write Your Own Review

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars
Quality
Price
Value

Get more info about this product

z Leave a message