Your location is United States. Wrong location or language? Choose a different one below..
Display language is English.
Your currency is USD.
North America
Your location is United States. Wrong location or language? Click here.

Scope Mounts for 14.5 mm Dovetail

General description:

Dovetail is a special platform on rifle's receiver, which enables installment of various mounts. This unique design is notched onto the rifle's receiver, barrel or slide. The most common and recognisable is 11 mm Dovetail design. 14.5 mm Dovetail can be mostly found on Czech Drop Barrel rifles. For example: Brno 500, 611, ZH, Super, Browning Erice, CZ 584 and of course many others. Dovetail design on these rifles is grooved on the rear top end of the barrel, with the length of approximatelly 4 cm.

Physical properties and dimensions:

For a better hold on the rifle, upper side of the Dovetail is wider than lower side. Dovetail dimensions are measured at the upper side, which is wider, in our case 14.5 mm. Generally, Dovetail design offers a possiblity of mount installment without screws going into the receiver. Scope mounts simply clamp on the Dovetail, with sufficient force so there is no movement during recoil. Additionally, all 14.5 mm Dovetails are designed with a recoil lug, which offers even better resistance against recoil stop. Recoil stop groove is canted on the left side of the Dovetail. Dovetail slopes are at an angle of 30 degrees. In general, rifles with 14.5 mm Dovetail are very similar to break barrel rifles with 12 mm Dovetail, which are even more common. For a more clear understanding, please see the attached image below.

14.5 mm Dovetail

Rifle with 14.5 mm Dovetail

For a more thorough and complete overview click below:

Fixed mounting options:

Fixed ring mounts – Two-Piece:

Fixed two-piece ring mounts cannot be detached from a rifle without the use of tools. They come at an affordable price and offer high reliability. Generally, they are not difficult to install on a rifle. Fixed means that the user cannot quickly detach and therefore switch scopes, which limits the usability of the rifle. Fixed ring mounts for 14.5 mm Dovetail are produced in two fashions. A) direct rings with 14.5 mm clamps and B) advanced two part rings with separated base part, which clamps 14.5 mm Dovetail and ring which is attached to the base part. Simple rings are cheaper and easier to manufacture, while more advanced rings with separated ring and base part are more expensive, but usually offer a possibility to adjust scope's windage on the mount itself. However please note, that fixed Two-Piece ring mounts for 14.5 mm Dovetail are not suitable for break barrel rifles from the previous picture. Such rings are only made for some rare Czech small caliber rifles which have 14.5 mm Dovetail notched into rifle's receiver.

We can group fixed ring mounts for 14.5 mm Dovetail in the following groups:

Fixed ring mounts - One-Piece:

Fixed One-Piece mounts for 14.5 mm Dovetail are designed in a rear facing Cantilever style. They are manufactured either from Aluminium or Steel. These mounts are very elegant, appealing and lightweight. All Monoblock mounts for 14.5 mm Dovetails are designed with separated base part and rings, which means that the rings and bases are joint together by screws. For 14.5 mm Dovetail only hunting style Monoblock mounts are availiable.

Steel one-piece Monoblock mounts for 14.5 mm Dovetail

Aluminium one-piece Monoblock mounts for 14.5 mm Dovetail

Fixed scope rail mounts – One-Piece:

One-Piece fixed scope rail mounts are designed in the same fashion as One-Piece fixed ring mounts.

Detachable Mounting options

When talking about Detachable Mounting options, this means these mounts are removable without tools or other instruments, additionally you can remove them simply with the use of bare hands. Usually, these mounts don't offer full repeatability. These mounting options offer great advantage in terms of transport. Riflescope and rifle can be transported individually. When reattaching the scope on the rifle, point of impact shifts up to 10 cm on 100 m. It can also shift much less. For 14.5 mm Dovetail, there are only one-piece Detachable Mounts availiable. Detachable mounts which are designed with levers are repeatable, while the ones designed with screws are usually non – repeatable. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

Detachable Ring mounts:

Detachable Rings mounts are designed with simple metal hand tightening screws, which are used for quick remove from the rifle. These mounts straightforwardly clamp on the 14.5 mm Dovetail. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

Detachable scope rail mounts:

Detachable Scope Rail mounts are usually composed of two-parts. Lower part of the mount clamps on the Dovetail, while the upper part clamps on scope rail. There are four different Scope Rail mounts available. Which are: LM rail, Zeiss ZM/VM rail, Swarovski SR rail and S&B Convex rail. Ordinarily, they are designed with windage adjustment incorporated in their design and are commonly more expensive. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

Repeatable detachable mounts

Repeatable mounts are the most sophisticated mounts available and their main purpose is the removal of the telescopic sight from the rifle and mount it back again without the need of zeroing it all over. Repeatable detachable mounts are basically the same as detachable ring or scope rail mounts, with a difference regarding mounting mechanism. Repeatable detachable mounts are designed with a precise clamping mechanism, which always requires identical hand clamping force everytime. Additionally, the same position is a guarantee. Repeatable detachable mounts are very similar to basic detachable mounts for 14.5 mm Dovetail, but with more advanced and sophisticated tightening mechanism. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

Repeatable Slip-On ring mounts for 14.5 mm Dovetail:

Repeatable Slip-On rail mounts for 14.5 mm Dovetail:

Mounting bases:

Picatinny rails:

The Picatinny rail is on a good way of becoming a global standard for mounting since it was invented in 1995. Developed on the Weaver template, the biggest advantage of the Picatinny rail is the usage across its entire length, unlike Weaver which has predesignated slots for mounting, limiting its usability and versatility. Ease of use and interchangeability are also its assets. Picatinny has slots evenly placed, namely exactly 5.23 mm one from the other and 3 mm deep. Because of this, the mounting is identical on all firearms using the Picatinny standard. Picatinny rail for 14.5 mm Dovetail is usually designed for Red Dot Sight. Additionally, they can accommodate Night Vision, Thermal and Digital optics.

For 14.5 mm Dovetails, Picatinny rails are basically adapters. Please see the option below. They are mostly meant for Red Dot Sights and not mounting of heavy scopes.

Risers:

Risers offer difference only in height meanwhile, mounting solution stays the same. For example, bottom side clamps the 14.5 mm Dovetail, while upper side also offers a posibillity for 14.5 mm Dovetail installment. Riser for 14.5 mm Dovetail are mostly meant for small caliber rifles.

Adapters:

Adapters offer difference of height and mounting solutions. For example, upper side of the adapter has a Picatinny rail installed, while bottom side attaches to Dovetail additionally, it also raises mounting surface. Riser for 14.5 mm Dovetail are mostly meant for small caliber rifles.

RedDot mounting options:

Docter Sight mounts

The Docter Sight is a reflex sight with an array of application options. It is ideal for shotguns and for use on driven hunts. It can also be used on handguns, rifles and various other platforms. There are three availiable Docter sight mounting solutions. Which are: Repeatable, Fixed and Detachable. We should mention that Detachable. Docter sights mounts require a new zeroing everytime you reattach it to the rifle. Repeatable mounts hold a constant zero. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

Aimpoint Micro mounts

Aimpoint Micro is a tube dot sight for military use but is also gaining in popularity on the civil market. There are two types of models: the H models are designed for hunters, while the T models are designed for military users. There are three availiable Aimpoint Micro mounting solutions. Which are: Repeatable, Fixed and Detachable. We should mention that Detachable Aimpoint Micro mounts require a new zeroing everytime you reattach it to the rifle. Repetable mounts hold a constant zero. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

Zeiss Compact Point mounts

Zeiss Compact Point is a contemporary Red Dot Reflex sight ideally designed for driven hunts. Due to it's small, rigid and compact design, it's very appropriate and usable for competition and sport shooting. Zeiss Compact Point can be mounted on shotguns, handguns and rifles. This small, lightweight but robust optical device is availiable with two different versatile mounting options. A) Standard mounting, for Picatinny and Weaver mounting rails. B) Zeiss plate, a universal mounting option for various rifles. There are three availiable Zeiss Compact Point mounting solutions. Which are: Repeatable, Fixed and Detachable. We should mention that Detachable Zeiss Compact Point mounts require a new zeroing everytime you reattach it to the rifle. Repetable mounts hold a constant zero. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

 

Show more

     

Set Descending Direction
items per page
Page:
  1. 1
  2. 2
Set Descending Direction
items per page
Page:
  1. 1
  2. 2
Leave a message