Your location is United States. Wrong location or language? Choose a different one below..
Display language is English.
Your currency is USD.
North America
Your location is United States. Wrong location or language? Click here.

Scope mounts for Anschutz 1780

General description:

Anschütz is a renowned manufacturer of sporting firearms with headquarters in Ulm, Germany. J.G. Anschütz produces Air pistols, Air rifles, Rimfire and Centerfire rifles. Company was founded in the middle of 1850, more precisely 1856 by Julius Gottfried Anschütz. Currently, Anschütz manufactures rifles for hunting, Biathlon and Target competitions. Additionally, Anschütz is also known as one of the major shareholders of Steyr Sportwaffen company, which is an Austrian company renowned for the production of various target firearms. 

Physical properties and dimensions:

Anschutz 1780 is a Bolt-Action rifle designed and chambered in several different chamberings such as: .308 Win., .30-06 SPRG., 8x57 IS and 9.3x62 calibers. This model is designed with a 5780 D trigger, and 5 round capacity magazine. Rifle's bolt is about 56 cm long and it's designed with six lugs in the rows of two. Receiver is made from High grade Aluminium materials, and it's designed with 5 drilled and tapped holes for the purpose of mounting telescopic sights. Anschutz 1780 is about 109 cm long and weights aproximatelly about 3.2 kg. There are four different stocks availiable for this model, which are: Classic stock, German stock, Monte Carlo stock and Thumbhole stock. There is only one known version of this rifle the Anschutz 1780 D FL. Note, that Anschutz model 1781 uses the same action and dimensions for the purpose of mounting options, which means that mounts for Anschutz 1780 also fit model 1781. 

Anschutz 1780

Anschutz 1780

For a more thorough and complete overview click below:

Detachable Mounting options

When talking about Detachable Mounting options, this means these mounts are removable without tools or other instruments, additionally you can remove them simply with the use of bare hands. Usually, these mounts don't offer full repeatability. These mounting options offer great advantage in terms of transport. Riflescope and rifle can be transported individually. When reattaching the scope on the rifle, point of impact shifts up to 10 cm on 100 m. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

Detachable Ring mounts:

Detachable Rings mounts are designed with simple metal levers, which are used for quick remove from the rifle. These mounts are straightforwardly attached to Anschutz 1780's mouting surface. Final position of the levers can usually be switched without the change of the clamping force on the Dovetail. This offers a posibillity to adjust the position of the levers for a better visual appeal (both levers pointing in the same direction), once the mount is positioned and fixed on the receiver of the Anschutz 1780. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

Detachable scope rail mounts:

Detachable Scope Rail mounts are usually composed of two-parts. Lower part of the mount clamps on the Dovetail, while the upper part clamps on scope rail. There are four different Scope Rail mounts available. Which are: LM rail, Zeiss ZM/VM rail, Swarovski SR rail and S&B Convex rail. Ordinarily, they are designed with windage adjustment incorporated in their design and are commonly more expensive. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

Pivot mounts with rings:

A special kind of repeatable mounts are pivot mounts, also known as swing mounts. They offer 100 % repeatability and can be quickly and simply detached and reattached with the use of levers, buttons and screws, with no tools required. Pivot mounts are extremely durable, lightweight, compact and elegant. Their drawback is perhaps their price, which is considerably higher than the price of fixed mounts with rings and other mounting options. The installation on the rifle should be done by a skilled gunsmith. Most of the times, pivot mounts are higher than 14 mm.

Pivot ring mounts guarantee 100 % repeatability and are available either as one-piece or two-piece versions. They allow simple installation of multiple riflescopes or red dot sights on a single rifle with great amount of interchangeability.

Pivot mounts with rails:

Pivot rail mounts are available in either one-piece or two-piece versions. They allow simple installation of multiple riflescopes or red dot sights on a single rifle with a great amount of interchangeability and 100 % repeatability. These mounts are almost the same as pivot mounts with rings but are intended for mounting of scopes with Zeiss ZM/VM rail, Swarovski SR rail, S&B Convex rail or traditional LM rail. Such setup tends to be a bit higher than with ring mounting, but this is usually not a problem for scopes with 50 or 56 mm objective lens. One-Piece Pivot mounts for rails clamp on the rail of the scope on almost it's entire length and provide very reliable mounting solution.

Mounting bases:

Picatinny rails:

The Picatinny rail is on a good way of becoming a global standard for mounting since it was invented in 1995. Developed on the Weaver template, the biggest advantage of the Picatinny rail is the usage across its entire length, unlike Weaver which has predesignated slots for mounting, limiting its usability and versatility. Ease of use and interchangeability are also its assets. Picatinny has slots evenly placed, namely exactly 5.23 mm one from the other and 3 mm deep. Because of this, the mounting is identical on all firearms using the Picatinny standard. Picatinny rail can accommodate all types of mounts, also those designed for Weaver standard.

Pivot bases:

Dentler bases:

Warne bases:

RedDot mounting options:

Docter Sight mounts

The Docter Sight is a reflex sight with an array of application options. It is ideal for shotguns and for use on driven hunts. It can also be used on handguns, rifles and various other platforms. There are three availiable Docter sight mounting solutions. Which are: Repeatable, Fixed and Detachable. We should mention that Detachable Docter sights mounts require a new zeroing everytime you reattach it to the rifle. Repeatable mounts hold a constant zero. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

 

Show more

     

Set Descending Direction
items per page
Page:
  1. 1
  2. 2
Set Descending Direction
items per page
Page:
  1. 1
  2. 2
Leave a message