Your location is United States. Wrong location or language? Choose a different one below..
Display language is English.
Your currency is USD.
North America
Your location is United States. Wrong location or language? Click here.

Scope mounts for Anschutz 1727

General description:

Anschütz is a renowned manufacturer of sporting firearms with headquarters in Ulm, Germany. J.G. Anschütz produces Air pistols, Air rifles, Rimfire and Centerfire rifles. Company was founded in the middle of 1850, more precisely 1856 by Julius Gottfried Anschütz. Currently, Anschütz manufactures rifles for hunting, Biathlon and Target competitions. Additionally, Anschütz is also known as one of the major shareholders of Steyr Sportwaffen company, which is an Austrian company renowned for the production of various target firearms. 

Physical properties and dimensions:

Anschutz 1727 is designed with a famous straight – pull action, which is also used in Anschutz 1827 F. Rifle's receiver is drilled and tapped with four holes and 11 mm Dovetail design for the mounting purposes – designed as bases. Action's locking mechanism is designed with 7 steel balls. Rifle comes with two – stage trigger (also availiable for left – hand users). Barrel is around 59 cm long with 6 groove design. Anschutz 1727 is chambered in .17 HMR and .22 LR. Magazine can hold 4 or 5 rounds depending on the caliber. Anschutz 1727 chambered in .17 HMR can hold up to 4 round, as .22 LR caliber magazine can hold 5 rounds. Rifle is overally about 104 cm long and weight aproximatelly about 3.4 kg. Rifle has a Classic Schnabel (Walnut German) fore – end stock. There are two availiable versions of this rifle, which are: Anschutz 1727 F L and Anschutz 1727 F.

Anschutz 1727

Anschutz 1727

For a more thorough and complete overview click below:

Fixed mounting options:

Fixed ring mounts – Two-Piece:

Fixed two-piece ring mounts cannot be detached from a rifle without the use of tools. They come at an affordable price and offer high reliability. Generally, they are not difficult to install on a rifle. Fixed means that the user cannot quickly detach and therefore switch scopes, which limits the usability of the rifle. Fixed ring mounts for Anschutz 1727 are mostly produced in two fashions. A) direct rings with clamps and B) advanced two part rings with separated base part, which clamps 11 mm Dovetail on Anschutz 1727 and ring which is attached to the base part. Simple rings are cheaper and easier to manufacture, while more advanced rings with separated ring and base part are more expensive, but usually offer a possibility to adjust scope's windage on the mount itself. Some manufacturers also produce one-piece Monoblock mounts for Anschutz 1727.

We can group fixed ring mounts for Anschutz 1727 in the following groups:

Aluminium Two-Piece Rings

Steel Two-Piece Rings

Fixed scope rail mounts - Two-Piece:

This is a more expensive option than buying fixed ring mounts however, it's still fairly cheap in comparison to other mounting solutions. If you own a riflescope with rail mounting option like, Zeiss ZM/VM rail, Swarovski SR rail, S&B Convex rail or LM rail then fixed scope rail mounts for Anschutz 1727 are a good mounting alternative. Fixed rail mounts are reliable and lightweight, but user is unable to quickly switch between scopes on the rifle. Not many manufacturers make these, so there are fewer possibilities than amongst fixed ring mounts. Majority of mounts in this category are of two-part fashion. That means, that the mounts are composed of lower part (base part) that is mounted directly on the 11 mm Dovetail on the receiver, and upper part which holds the scope rail.

Fixed ring mounts - One-Piece:

Fixed one-piece ring mounts are divided into two separate groups. First group are lightweight Monoblock Mounts for Anschutz 1727. They are very good at providing concentricness between both rings which results in no tension on the scope. The second group are Tactical Monoblock Mounts for Anschutz 1727. These mounts provide great robustness and stability.

Aluminium One-Piece Air Gun Monoblock mounts for Anschutz 1727

Aluminium One-Piece Tactical Monoblock mounts for Anschutz 1727

Detachable Mounting options

When talking about Detachable Mounting options, this means these mounts are removable without tools or other instruments, additionally you can remove them simply with the use of bare hands. Usually, these mounts don't offer full repeatability. These mounting options offer great advantage in terms of transport. Riflescope and rifle can be transported individually. When reattaching the scope on the rifle, point of impact shifts up to 10 cm on 100 m. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

Detachable Ring mounts:

Detachable Rings mounts are designed with simple metal levers, which are used for quick remove from the rifle. These mounts straightforwardly clamp on the 11 mm Dovetail of the Anschutz 1727. Final position of the levers can usually be switched without the change of the clamping force on the Dovetail. This offers a posibillity to adjust the position of the levers for a better visual appeal (both levers pointing in the same direction), once the mount is positioned and fixed on the 11 mm Dovetail. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

Detachable scope rail mounts:

Detachable Scope Rail mounts are usually composed of two-parts. Lower part of the mount clamps on the Dovetail, while the upper part clamps on scope rail. There are four different Scope Rail mounts available. Which are: LM rail, Zeiss ZM/VM rail, Swarovski SR rail and S&B Convex rail. Ordinarily, they are designed with windage adjustment incorporated in their design and are commonly more expensive. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

Repeatable detachable mounts

Repeatable mounts are the most sophisticated mounts available and their main purpose is the removal of the telescopic sight from the rifle and mount it back again without the need of zeroing it all over. Repeatable detachable mounts are basically the same as detachable ring or scope rail mounts, with a difference regarding mounting mechanism. Repeatable detachable mounts are designed with a precise clamping mechanism, which always requires identical hand clamping force everytime. Additionally, the same position is a guarantee. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

Repeatable Slip-On ring mounts:

Repeatable Slip-On rail mounts:

Pivot mounts with rings:

A special kind of repeatable mounts are pivot mounts, also known as swing mounts. They offer 100 % repeatability and can be quickly and simply detached and reattached with the use of levers, buttons and screws, with no tools required. Pivot mounts are extremely durable, lightweight, compact and elegant. Their drawback is perhaps their price, which is considerably higher than the price of fixed mounts with rings and other mounting options. The installation on the rifle should be done by a skilled gunsmith. Most of the times, pivot mounts are higher than 14 mm.

Pivot ring mounts guarantee 100 % repeatability and are available either as one-piece or two-piece versions. They allow simple installation of multiple riflescopes or red dot sights on a single rifle with great amount of interchangeability.

Pivot mounts with rails:

Pivot rail mounts are available in either one-piece or two-piece versions. They allow simple installation of multiple riflescopes or red dot sights on a single rifle with a great amount of interchangeability and 100 % repeatability. These mounts are almost the same as pivot mounts with rings but are intended for mounting of scopes with Zeiss ZM/VM rail, Swarovski SR rail, S&B Convex rail or traditional LM rail. Such setup tends to be a bit higher than with ring mounting, but this is usually not a problem for scopes with 50 or 56 mm objective lens. One-Piece Pivot mounts for rails clamp on the rail of the scope on almost it's entire length and provide very reliable mounting solution.

Mounting bases:

Picatinny rails:

The Picatinny rail is on a good way of becoming a global standard for mounting since it was invented in 1995. Developed on the Weaver template, the biggest advantage of the Picatinny rail is the usage across its entire length, unlike Weaver which has predesignated slots for mounting, limiting its usability and versatility. Ease of use and interchangeability are also its assets. Picatinny has slots evenly placed, namely exactly 5.23 mm one from the other and 3 mm deep. Because of this, the mounting is identical on all firearms using the Picatinny standard. Picatinny rails are usually available with 0 MOA or 20 MOA inclinations. 20 MOA inclination enables user to have more elevation adjustment availiable on the riflescope additionally, better long range performance. Picatinny rail can accommodate all types of mounts, also those designed for Weaver standard.

Adapters:

Adapters offer difference of height and mounting solutions. For example, upper side of the adapter has a Picatinny rail installed, while bottom side attaches to Dovetail additionally, it also raises mounting surface.

Risers:

Risers offer difference only in height meanwhile, mounting solution stays the same. For example, bottom side clamps the 11 mm Dovetail, while upper side also offers a posibillity for 11 mm Dovetail installment.

Warne bases:

RedDot mounting options:

Docter Sight mounts

The Docter Sight is a reflex sight with an array of application options. It is ideal for shotguns and for use on driven hunts. It can also be used on handguns, rifles and various other platforms. There are three availiable Docter sight mounting solutions. Which are: Repeatable, Fixed and Detachable. We should mention that Detachable Docter sights mounts require a new zeroing everytime you reattach it to the rifle. Repeatable mounts hold a constant zero. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

Aimpoint Micro mounts

Aimpoint Micro is a tube dot sight for military use but is also gaining in popularity on the civil market. There are two types of models: the H models are designed for hunters, while the T models are designed for military users. There are three availiable Aimpoint Micro mounting solutions. Which are: Repeatable, Fixed and Detachable. We should mention that Detachable Aimpoint Micro mounts require a new zeroing everytime you reattach it to the rifle. Repetable mounts hold a constant zero. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

Zeiss Compact Point mounts

Zeiss Compact Point is a contemporary Red Dot Reflex sight ideally designed for driven hunts. Due to it's small, rigid and compact design, it's very appropriate and usable for competition and sport shooting. Zeiss Compact Point can be mounted on shotguns, handguns and rifles. This small, lightweight but robust optical device is availiable with two different versatile mounting options. A) Standard mounting, for Picatinny and Weaver mounting rails. B) Zeiss plate, a universal mounting option for various rifles. There are three availiable Zeiss Compact Point mounting solutions. Which are: Repeatable, Fixed and Detachable. We should mention that Detachable Zeiss Compact Point mounts require a new zeroing everytime you reattach it to the rifle. Repetable mounts hold a constant zero. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.

 

Show more

     

Set Descending Direction
items per page
Set Descending Direction
items per page
Leave a message