Baikal company or Izhevsky Mekhanichesky Zavod „JSC“ has been in the firearms manufacturing business for more than 60 years. The company was founded in the Russian city of Izhevsk in the Western Urals. These rifles are known to whitstand an incredible amount of impact. Older models of these rifles were not built for elegancy and beauty, but they were definitely built as tough as T34 Russian tank. At first Baikal was producing heavy military firearms, but today Baikal manufactures firearms, hand power tools, medical appliances, packaging equipment and more. There are more than 50 models of Baikal rifles in existence. Company produces rifles, smoothbore guns, air guns, combat and service firearms, target pistols and weapons for self defence.
Baikal IZH 94 is a single shot Bolt – Action rifle. Barrel of this rifle is fluted and free floating, with trigger action built into the receiver. Rifle is very easy to break open, due to it's hammer „rebound“ and separate spring loaded striker. Rifle is chambered in various chamberings. For example: .22 LR., .22 WMR., .17 HMR., 5.6x39, .223 Rem., .30 – 06 SPRG., 9.3x74R, .308 Win., .222 Rem., 7.62x39, 7.62x53R, 7.62x54R, 9x53R, 9.3x74R. Barrel is around 60 cm long, while the rifle itself measures 100 – 105 cm in length, depending on the version of the rifle. Baikal IZH 94 today, is being produced in four versions. Baikal IZH 94, Baikal IZH 94 MP, Baikal IZH 94 „Express“ and Baikal IZH 94 „Sever“. For the purpose of mounting solutions, rifle is designed with an 12 mm Dovetail on the receiver. Stocks are manufactured from beech, walnut, birch or plastic depending on the version of the rifle.
Bettinsoli Combo, Sabatti Combo, Fair Rizzini, Fair Combi, Sabatti Express, Steyt Duett, Antonio Zoli Express, Brno Combo, Brno Express, Baikal IZH (18, 94), Marocchi Finn, Valmet 412, Valmet Petra, Haenel Jaeger 9 and Heym 22 S, Heym B26, Heym Express are all break-action rifles with a 12 mm Dovetail on their receiver. European break-barrel rifles (single-barrel, combo, express, trible barrel) mostly have a 12 mm Dovetail on the receiver – in Europe, this has become a standard for such rifles. The Dovetail is equipped with a recoil stopper for rear-pointed cantilever mounts.
For a more thorough and complete overview click below:
For Baikal IZH 94 MH, there are One-Piece Hunting Monoblock mounts availiable. These mounts are highly elegant and appealing. Fixed one-piece ring mounts for this rifle are manufactured either from Aluminium or Steel.
Aluminium One-Piece Hunting Monoblock mounts
Steel One-Piece Hunting Monoblock mounts
These mounts are manufactured either from Aluminium or Steel. They are availiable as two part design. Which means that the base and rings are separated from one another. They can be made from a single metal piece.
When talking about Detachable Mounting options, this means these mounts are removable without tools or other instruments, additionally you can remove them simply with the use of bare hands. Usually, these mounts don't offer full repeatability. These mounting options offer great advantage in terms of transport. Riflescope and rifle can be transported individually. When reattaching the scope on the rifle, point of impact shifts up to 10 cm on 100 m. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.
Detachable Rings mounts are designed with simple metal levers, which are used for quick remove from the rifle. These mounts straightforwardly attach to the rifle's receiver. Final position of the levers can usually be switched without the change of the clamping force. This offers a posibillity to adjust the position of the levers for a better visual appeal (both levers pointing in the same direction), once the mount is positioned and fixed on the receiver of Baikal IZH 94 MH. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.
Detachable Scope Rail mounts are composed of two-parts. Additionally, these mounts are designed with recoil groove and recoil log. Lower part of the mount clamps on the Dovetail, while the upper part clamps on scope rail. There are four different Scope Rail mounts available. Which are: LM rail, Zeiss ZM/VM rail, Swarovski SR rail and S&B Convex rail. Ordinarily, they are designed with windage adjustment incorporated in their design and are commonly more expensive. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.
A special kind of repeatable mounts are pivot mounts, also known as swing mounts. They offer 100 % repeatability and can be quickly and simply detached and reattached with the use of levers, buttons and screws, with no tools required. Pivot mounts are extremely durable, lightweight, compact and elegant. Their drawback is perhaps their price, which is considerably higher than the price of fixed mounts with rings and other mounting options. The installation on the rifle should be done by a skilled gunsmith. Most of the times, pivot mounts are higher than 14 mm.
Pivot ring mounts guarantee 100 % repeatability and are available either as one-piece or two-piece versions. They allow simple installation of multiple riflescopes or red dot sights on a single rifle with great amount of interchangeability.
Pivot rail mounts are available in either one-piece or two-piece versions. They allow simple installation of multiple riflescopes or red dot sights on a single rifle with a great amount of interchangeability and 100 % repeatability. These mounts are almost the same as pivot mounts with rings but are intended for mounting of scopes with Zeiss ZM/VM rail, Swarovski SR rail, S&B Convex rail or traditional LM rail. Such setup tends to be a bit higher than with ring mounting, but this is usually not a problem for scopes with 50 or 56 mm objective lens. One-Piece Pivot mounts for rails clamp on the rail of the scope on almost it's entire length and provide very reliable mounting solution.
Repeatable mounts are the most sophisticated mounts available and their main purpose is the removal of the telescopic sight from the rifle and mount it back again without the need of zeroing it all over. Repeatable detachable mounts are basically the same as detachable ring or scope rail mounts, with a difference regarding mounting mechanism. Repeatable detachable mounts are designed with a precise clamping mechanism, which requires identical hand clamping force for every attachment. Additionally, the same position of the mount is a guarantee. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.
Repeatable Slip-On ring mounts for Baikal IZH 94 MH:
Repeatable Slip-On rail mounts for Baikal IZH 94 MH:
The Picatinny rail is on a good way of becoming a global standard for mounting since it was invented in 1995. Developed on the Weaver template, the biggest advantage of the Picatinny rail is the usage across its entire length, unlike Weaver which has predesignated slots for mounting, limiting its usability and versatility. Ease of use and interchangeability are also its assets. Picatinny has slots evenly placed, namely exactly 5.23 mm one from the other and 3 mm deep. Because of this, the mounting is identical on all firearms using the Picatinny standard. Picatinny rails are usually available with 0 MOA or 20 MOA inclinations.Picatinny rail can accommodate all types of mounts, also those designed for Weaver standard. Full size mounts of this type are designed for mounting of modern optics for example thermal or digital.
The Docter Sight is a reflex sight with an array of application options. It is ideal for shotguns and for use on driven hunts. It can also be used on handguns, rifles and various other platforms. There are three availiable Docter sight mounting solutions. Which are: Repeatable, Fixed and Detachable. We should mention that Detachable Docter sights mounts require a new zeroing everytime you reattach it to the rifle. Repeatable mounts hold a constant zero. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.
Aimpoint Micro is a tube dot sight for military use but is also gaining in popularity on the civil market. There are two types of models: the H models are designed for hunters, while the T models are designed for military users. There are three availiable Aimpoint Micro mounting solutions. Which are: Repeatable, Fixed and Detachable. We should mention that Detachable Aimpoint Micro mounts require a new zeroing everytime you reattach it to the rifle. Repetable mounts hold a constant zero. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.
Zeiss Compact Point is a contemporary Red Dot Reflex sight ideally designed for driven hunts. Due to it's small, rigid and compact design, it's very appropriate and usable for competition and sport shooting. Zeiss Compact Point can be mounted on shotguns, handguns and rifles. This small, lightweight but robust optical device is availiable with two different versatile mounting options. A) Standard mounting, for Picatinny and Weaver mounting rails. B) Zeiss plate, which is a universal mounting option for various rifles. There are three availiable Zeiss Compact Point mounting solutions. Which are: Repeatable, Fixed and Detachable. We should mention that Detachable Zeiss Compact Point mounts require a new zeroing everytime you reattach it to the rifle. Repetable mounts hold a constant zero. Usually, Detachable Mounting options are designated as QR (quick release) or QD (quick detachable) abbreviations.
Scroll down to products