Your location is United States. Wrong location or language? Choose a different one below..
Display language is English.
Your currency is USD.
North America
Your location is United States. Wrong location or language? Click here.
Suitable for
  1. 16.5 mm Dovetail (2)
  1. Brunner 16.0 mm (2)
  1. Brno ZKM 611 (2)
  1. Brno ZKB 680 (2)
  1. Brno Fox (2)
  1. CZ 527 (2)
  1. Sako TRG 22/42 (2)
  1. Sako TRG 21, 41 (2)
  1. Sako M10 (2)
  1. Tikka T3 (2)
  1. 11 mm Dovetail (1)
  1. 12 mm Dovetail (3)
  1. 14.5 mm Dovetail (5)
  1. 16.5 mm Dovetail (5)
  1. 19 mm Dovetail (1)
  1. 21 mm - Picatinny rail (59)
  1. 21 mm - Weaver rail (30)
  1. Accuracy International (1)
  1. Anschutz 1417 (2)
  1. Anschutz 1517 (2)
  1. Anschutz 1727 F (2)
  1. Anschutz 54 (2)
  1. Anschutz 64 (2)
  1. Antonio Zoli Express (3)
  1. Baikal IZH 18 (3)
  1. Baikal IZH 94 (3)
  1. Barnard S (1)
  1. Bat HR (1)
  1. Bat VR (1)
  1. Bergara B14 LA (1)
  1. Bergara B14 SA (1)
  1. Bergara BX11 (1)
  1. Bettinsoli (3)
  1. Blaser B95 / B97 (6)
  1. Blaser BB97 (5)
  1. Blaser BBF 95 / 97 (5)
  1. Blaser BD14 (5)
  1. Blaser BS 95 / 97 (5)
  1. Blaser D99 (6)
  1. Blaser K95 (6)
  1. Blaser R8 (7)
  1. Blaser R93 (6)
  1. Blaser S2 (6)
  1. Brno Combo (3)
  1. Brno Express (3)
  1. Brno Fox (2)
  1. Brno ZKB 680 (2)
  1. Brno ZKK 600 (1)
  1. Brno ZKK 601 (1)
  1. Brno ZKK 602 (1)
  1. Brno ZKM 611 (2)
  1. Brunner 16.0 mm (2)
  1. Brunner 19.0 mm (1)
  1. CZ 452 (1)
  1. CZ 453 (1)
  1. CZ 455 (1)
  1. CZ 511 (1)
  1. CZ 512 (1)
  1. CZ 513 (1)
  1. CZ 527 (2)
  1. CZ 537 (1)
  1. CZ 550 (1)
  1. CZ 557 (1)
  1. F.A.I.R. Combi (3)
  1. Fair / Rizzini Express (3)
  1. Haenel Jager 10 (1)
  1. Haenel Jager 9 (3)
  1. Heym 22 S (3)
  1. Heym B 26 (3)
  1. Heym Express (3)
  1. Keppeler Sports Rifles (1)
  1. Leupold QR Bases (1)
  1. MAKmilmont base (1)
  1. Marocchi Finncl. 512s  (3)
  1. Mauser 201 KK (1)
  1. Mauser M96 (1)
  1. Mauser M97 (1)
  1. Merkel B3 (1)
  1. Merkel B4 (1)
  1. Merkel K3 (1)
  1. Merkel K4 (1)
  1. Merkel KR1 (1)
  1. Merkel RX Helix (1)
  1. Optilock bases (3)
  1. Pedersoli Lever Action (1)
  1. Remington 700 LA (1)
  1. Remington 700 SA (1)
  1. Remington 783 LA (1)
  1. Roessler Titan 16 (1)
  1. Sabatti Express (3)
  1. Sabatti Rover LA (1)
  1. Sako 75 (1)
  1. Sako 85 M (1)
  1. Sako 85 S (1)
  1. Sako M10 (2)
  1. Sako TRG 21 / 41 (2)
  1. Sako TRG 22/42 (4)
  1. Sauer 100 (1)
  1. Sauer 101 (1)
  1. Sauer 200 STR (1)
  1. Sauer 303 (1)
  1. Sauer 404 (2)
  1. Savage Rounded Top (2)
  1. SIG Sauer SSG 3000 (1)
  1. Steyr Duett (3)
  1. Talley Bases (2)
  1. Tikka T3 (6)
  1. Valmet 412 S (3)
  1. Valmet Petra (3)
  1. Weihrauch HW (2)

    34mm Scope Ring Mounts

    The 34 mm main tube is somewhat a new standard meant for tactical rifle scopes. It is adopted by a lot of rifle scope manufacturers as it provides more space for elevation compared to the 30 mm tube. In order to mount the 34 mm rifle scope you need the mounting rings to fit this diameter.

    The most important thing when mounting a rifle scope with rings is to be aware of the preassure needed to fasten the rings. Go over the limit and the structural integrity of the rifle scope will be compromised. Rings can also leave a visible mark if not tightent acordingly. The amount of torque should not exceed 2.2 Nm.

    Rings with the diameter of 34mm are usually at least 20mm wide, while with tactical mounts the width can be as much as 32mm.

    A lot of different manufacturers are putting their 34 mm products on the market. The 34 mm rings are manufactured by the following: EAW, MAK, Rusan, Recknagel,Contessa, Spuhr, Henneberger, Kozap, Leupold, Dentler and Madritsch.

     

    Is lapping of the rings really needed?

    Lapping is a process that is essentially lining two mounting rings perfectly to one-a-another. It is done with special cylinders that grind off the excess metal.

     

    When the ring is constructed from two near half circles - so if the circle of the ring is split in half, roughly in the ratio 50:50 and such rings are mounted on two separate mounting bases, than lapping is recommended. If lapping is not performed, the very small offsetting can be present when all the different pieces of the mount come together and when both rings are mounted on two separated bases. If mounting of two high quality rings is done on a single-piece base, then lapping is not needed. This is one of the reasons that Picatinny rails are becoming so popular in the recent years.

    In the worst case scenario the axis that runs through the center of the rear ring does not completely match the axis that runs through the center of the front ring. For this reason the scope, if mounted into such rings is under unwanted structural stress. The most obvious problems that occurs due to this reason is less than perfect optical performance, tracking problems, the side focus mechanism can stop working and the point of impact groups can be dispersed.

    If the ring is designed in the fashion of 1/3 base of the ring and 2/3 the top of the ring than lapping is not required as the design is plastic enough to bend slightly and adjust its shape to the scope tube. The same applies for ½ - 1/2 rings mounted on single piece base.

    It may be a good idea to take in consideration to choose the 1/3 : 2/3 rings as they do not require additional lapping to be fitted properly. Or use a single piece mounting base.

    Lapping is also not required with mono block mounts and all mounts made from one piece of material and alignment of both rings is usually perfect. It is also not required with high quality European mounts, since their tolerances are minimal.

     

    Show more

         

    Set Descending Direction
    items per page
    Set Descending Direction
    items per page
    Leave a message