4.77/5 out of 1.900+ reviews Great reviews
United States
USD - VAT Excluded
Localization Settings
English
USD
VAT Excluded
Compare Products
You have no items to compare.
Shopping Cart
You have no items in your shopping cart.
// 29.9.2023 GA4 add to cart // 29.9.2023 GA4 add to cart

MAK steel picatinny rail, Sauer 202 Standard

Videos
Do you need help with this item?
Our experienced team is here to resolve any issues before, during or after you purchase this item. If you have a question don't hesitate to contact us bellow:
Contact us

MAK steel picatinny rail, Sauer 202 Standard Details

Introduction

Picatinny rail consists of slots with 5.23 mm spaces between one another, which means that it can be used across its entire length. It is simple to mount and interchangeable – if something is made for a Picatinny rail, it will fit regardless of the manufacturer or manufacturing date. It is affordable, resilient and reliable – this is why it so commonly used by professionals and military. Because of all its great qualities, Picatinny rail has been dominating the rail market in the recent years.

Picatinny is a big step forward from the Weaver standard. Weaver has a few predesignated slots while Picatinny has slots all over its surface, allowing the device to be mounted wherever the user finds it fitting. Weaver's slot is 3.8 mm wide, which is why ring mounts made for a Weaver rail will also fit on a Picatinny rail while ring mounts made specifically for a Picatinny rail will not fit on a Weaver rail. This is one of the main reasons why Picatinny is a far better mounting solution.

MAK is one of the biggest mount manufacturers in Germany. All of their Picatinny rails are manufactured from high-quality steel and are known for their mat finish that does not reflect light. The edges of the rails are wavy, adding to the high-quality appearance. MAK Picatinny rails lack a slot that would allow the user to use the Picatinny rail with sights.

About the rifle

Sauer & Sohn was founded in 1751 in Germany. It is the second oldest manufacturer of firearms in the world. One of their most known firearms is Sauer 38H, an advanced semiautomatic pistol that was produced in great numbers – it featured a cocking/decocking lever. They partnered with Swiss company SIG in 1976 – a new line of semi-automatic pistols was launched, branded SIG Sauer.

Sauer 202 Medium, also known as Sauer 202 Standard, is a bolt-action rifle that is chambered for the following calibers: .22-250 Rem., .243 Win., .25-06 Rem., 6,5x55, 6,5x57, .270 Win., 7x64, .308 Win., .30-06, 8x57IS and 9.3x62. Its magazine has 3 rounds. Possible barrel lengths: 510, 560 and 600 mm. There are four holes drilled on Sauer 202's action for mounting purposes, two at the front and two at the rear. The ejection port is located on the right side of the rifle. Bolt runs smoothly and operates silently. The buyer can choose to have the receiver manufactured from aluminium or steel.

Sauer 202 Medium (Standard) has a similar action as Sauer 202 Magnum. The radiuses of the mounting surfaces are the same but there is a difference in B distance (see the picture below). This is why two-piece mounts made for Sauer 202 Medium will fit Sauer 202 Magnum while one-piece mounts made for Sauer 202 Medium will not fit Sauer 202 Magnum.

Sauer 202 Medium (Standard) and Sauer 200 have an action of same dimensions, which is why they share the same mounts.

Mounting details

A: 21.84 mm
B: 94.2 mm
C: 21.84 mm
BHU: 1.5 mm
Fi: 6-48
R1: R17.4
R2: R17.4


Mounting instructions


Remove all the stains (grease, oil etc.) from the rifle's receiver with a cleaning fluid (acetone). Once the surface is clean and dry, check whether the screws match the rail and the holes on the receiver. Make sure that the Picatinny rail is compatible with the rifle by inspecting the mounting holes on both. Before mounting the rail permanently, apply a minimal amount of thread-locking fluid 278 or 648 on screws and contact surfaces. Be careful not to get the fluid in or near the mounting holes. Carefully clean the remaining excess fluid around the rail with a cleaning fluid. Using a torque driver, screw the screws appropriately (up to 2.2 Nm) – do not overtighten.

Warranty


The product has a warranty period of 10 years.

Add to Compare Save and send

MAK steel picatinny rail, Sauer 202 Standard Specifications

ManufacturerMAK
Mount seriesMAK Picatinny rails
Made inGermany
In production sinceNo
Warranty10 years
SKU55201-50080
Length.170.9089 mm
MaterialSteel
ColorBlack
BH-build height. 7mm
H height.0
Inclination 0 MOA
Type of BasePicatinny
Scope - Sight type Picatinny Rail
Mounting StandardNo
A 21.84 mm
B 94.20 mm
C 21.84 mm
Suitable for MountsSauer 202 Standard

Why

Shopping at optics-trade?

  • Worldwide shipping
  • Team of experts & enthusiasts
  • We understand what we sell
  • People from all over the world trust us

Reviews & Testimonials

Reviews for MAK steel picatinny rail, Sauer 202 Standard

1 reviews
Do you have any experience with this product?
We would love to hear your opinion by rating it:
Write a review
o sina calitate pret foarte buna By
Rate
it seems a bit massive, but it deserves to be on a Sauer 202 weapon

(Posted on 29/06/2015)

Get more info about this product

Most common questions (Q&A)

Community uploads

Leave a message