BLACK FRIDAY lasts for
United States
USD - VAT Excluded
Localization Settings
English
USD
VAT Excluded
Compare Products
You have no items to compare.
Shopping Cart
You have no items in your shopping cart.

MAKuick One-Piece QD, Sauer 404, 40 mm

Do you need help with this item?
Our experienced team is here to resolve any issues before, during or after you purchase this item. If you have a question don't hesitate to contact us bellow:
Contact us

MAKuick One-Piece QD, Sauer 404, 40 mm Details

Introduction

MAK is a German company, specialized in mounting solutions for optics. Their offer also includes riflescopes and red dot sights. MAK's products, made with topmost precision, are known for their high quality. To appease every need when it comes to mounting solutions, MAK has many series of mounts in their offer.

Sauer & Sohn, frequently referred to as Sauer, is Germany's oldest firearms manufacturer and the second oldest in the world, founded in 1751. Even though they have been around for nearly three hundred years, they remain innovative. One of their most known firearms is Sauer 38H, an advanced semiautomatic pistol that was produced in great numbers – it featured a cocking/decocking lever.

About the rifle

Sauer 404 is a bolt-action rifle that was launched in 2015. It succeeded the 202 model. On the outside, it is very similar to its predecessor. Sauer has made changes regarding the safety – the rifle is no longer equipped with a down/up push system but with a de-cocker. On the receiver, there are no mounting holes – for the 404, Sauer came up with a unique QD mounting system. There is a lock on the magazine release button and the trigger is of a 4-weight type. Sauer introduced SUK (Sauer Universal Key) with the 404. It is integrated into the sling swivel in the front part of the rifle and can be used to make trigger adjustments and remove the barrel, butt, and forend. Sauer chambers this rifle for .243 Win., 6.5x55, 6.5 Creedmoor, .270 Win., 7x64, .308 Win., .30-06 Sprg., 8x57 IS, 9.4x62, 7mm Rem. Mag., .300 Win. Mag., 8x68 S, .338 Win. Mag., .375 H&H, .404 Jeffery, and 10.3x60R.

Mounting details

Mounting details

 

MAKuick one-piece

MAKuick mounts are robust and reliable. They offer a 100 % repeatability, meaning that the user can remove them and put them back onto the rifle without the need to re-zero. MAKuick mounts are designed so that they can withstand the recoil of even the most powerful calibers out there. They are lightweight because both the base and the rings are made from aluminum. The whole system that is in contact with the rifle (the clamping assembly) is made from steel. MAKuick is a versatile series of mounts – it allows mounting of all sorts of rings, all sorts of mounting rails (LM, ZM/VM, SR, Convex), different adapters that allow mounting of other devices such as ATN X-Sight; Pulsar Digisight, Apex, Trail; Fortuna devices etc. MAKuick mounts made for the mounting of riflescopes with a rail underneath are made of one part. Because of this, they are more robust, durable and reliable. For digital and thermal optical devices, the buyer has to pick a MAKuick base with four holes on which rings are usually put. Instead of the rings, the user mounts an adapter on top that works as a connector between the thermal optics and the MAKuick base. MAK makes one-piece MAKuick bases for the following rifles: CZ 527, CZ 550, Merkel KR 1, Merkel RX Helix – also fits on all Picatinny rails, Sauer 303, Sako 75, Sako 85 S, Sako 85 M, Tikka T3 and Blaser rifles. They also make a MAKuick base for break barrel rifles with a 12 mm dovetail and for break barrel rifles with a 14.5 mm dovetail (usually found on Czech break barrel rifles).

MAKuick one-piece ring mounts

In the MAKuick series, MAK offers plenty of options. As regards the diameter, the following rings are produced: 25.4, 30, 34, 36 and 40 mm. The base measures 12 mm in height. The rings are available in 2.5, 5 and 10 mm BH height.

Mounting instructions

First, the user has to make sure that the rifle is fixed (it is advised that the rifle is put into a rifle holder). Once the mount is put onto the mounting surface and fixed by rotating the levers for 180°, the lock screws have to be unscrewed. The user then adjusts the clamping force of the adjustment screws with a hex key so that they are tightened but not too tightened. The lock screws have to be re-tightened to complete the mounting procedure. Once the riflescope is put into the ring mount, no lapping is required. The rings do not have to be glued. Nevertheless, some gunsmiths prefer to glue them to ensure that the riflescope does not move during shots. The recommended tightening torque is 2.2 Nm.

Warranty

The product has a warranty period of 10 years.

Add to Compare Save and send

MAKuick One-Piece QD, Sauer 404, 40 mm Specifications

ManufacturerMAK
Mount seriesMAKuick
Made inGermany
In production sinceNo
Warranty30 years
SKU5072-41144c
Length.0mm
MaterialSteel
ColorBlack
BH-build height.0mm
H height.0
Extension - KR KR 0.0 mm
Inclination 0 MOA
Type of mountDetachable mounts
Mounts FashionDirect Mounts, Hunting One-Piece Mounts, One-Piece Mount, Repeatable Mounts
Adju. windageNo
Scope - Sight type 40 mm
Mounting StandardN/A
Offset angleNo
Suitable for MountsSauer 303 SUM, Sauer 404

Why

Shopping at optics-trade?

  • Worldwide shipping
  • Team of experts & enthusiasts
  • We understand what we sell
  • People from all over the world trust us

Reviews & Testimonials

Reviews for MAKuick One-Piece QD, Sauer 404, 40 mm

No reviews yet. Please write a review.
Do you have any experience with this product?
We would love to hear your opinion by rating it:
Write a review

Get more info about this product

Most common questions (Q&A)

Community uploads