Your location is United States. Wrong location or language? Choose a different one below..
Display language is English.
Your currency is USD.
North America
Your location is United States. Wrong location or language? Click here.

MAKuick One-piece Mount, Sauer 303, LM rail

Do you need help with this item?
Our experienced team is here to resolve any issues before, during or after you purchase this item. If you have a question don't hesitate to contact us bellow:
Contact us

MAKuick One-piece Mount, Sauer 303, LM rail Details

Introduction

MAK is a German company, specialized in mounting solutions for optics. Their offer also includes riflescopes and red dot sights. MAK's products, made with topmost precision, are known for their high quality. To appease every need when it comes to mounting solutions, MAK has many series of mounts in their offer.

Sauer & Sohn, frequently referred to as Sauer, is Germany's oldest firearms manufacturer and the second oldest in the world, founded in 1751. Even though they have been around for nearly three hundred years, they remain innovative. One of their most known firearms is Sauer 38H, an advanced semiautomatic pistol that was produced in great numbers – it featured a cocking/decocking lever.

About the rifle

Sauer 303 is a semi-automatic rifle with a unique mounting system called Sauer ISI rail – the buyer has to keep in mind to get mounts made specifically for Sauer 303. ISI rail allows simple detachment and reattachment and is 100 % repeatable. This same unique rail can also be found on some Sauer 202 models. The medium version is chambered for .308 Win., 7x64, .30-06 Spring., 8x57 IS, 9.3x62, while the magnum version is available in .300 Win. Mag., .338 Win. Mag. (requires the use of muzzle brake). There are six locking lugs on the bolt.

Mounting details

A: / (ISI rail)
B: / (ISI rail)
C: / (ISI rail)
BHU: 0 mm
Fi: /
R1: ISI rail
R2: ISI rail

MAKuick one-piece

MAKuick mounts are robust and reliable. They offer a 100 % repeatability, meaning that the user can remove them and put them back onto the rifle without the need to re-zero. MAKuick mounts are designed so that they can withstand the recoil of even the most powerful calibers out there. They are lightweight because both the base and the rings are made from aluminum. The whole system that is in contact with the rifle (the clamping assembly) is made from steel. MAKuick is a versatile series of mounts – it allows mounting of all sorts of rings, all sorts of mounting rails (LM, ZM/VM, SR, Convex), different adapters that allow mounting of other devices such as ATN X-Sight; Pulsar Digisight, Apex, Trail; Fortuna devices etc. MAKuick mounts made for the mounting of riflescopes with a rail underneath are made of one part. Because of this, they are more robust, durable and reliable. For digital and thermal optical devices, the buyer has to pick a MAKuick base with four holes on which rings are usually put. Instead of the rings, the user mounts an adapter on top that works as a connector between the thermal optics and the MAKuick base. MAK makes one-piece MAKuick bases for the following rifles: CZ 527, CZ 550, Merkel KR 1, Merkel RX Helix – also fits on all Picatinny rails, Sauer 303, Sako 75, Sako 85 S, Sako 85 M, Tikka T3 and Blaser rifles. They also make a MAKuick base for break barrel rifles with a 12 mm dovetail and for break barrel rifles with a 14.5 mm dovetail (usually found on Czech break barrel rifles).

MAKuick one-piece rail mounts

In the MAKuick series, mounts for the following types of rails are currently produced: LM, ZM/VM, SR, and Convex. The BH height of the base is 12 mm. Mounting a riflescope with a rail underneath on the rifle is more simple than mounting with rings – the riflescope is automatically horizontally aligned with the rifle's barrel when mounted, no extra adjustments are necessary. The mount is made out of one part.  

Mounting instructions

First, the user has to make sure that the rifle is fixed (it is advised that the rifle is put into a rifle holder). Once the mount is put onto the mounting surface and fixed by rotating the levers for 180°, the lock screws have to be unscrewed. The user then adjusts the clamping force of the adjustment screws with a hex key so that they are tightened but not too tightened. The lock screws have to be re-tightened to complete the mounting procedure. The recommended tightening torque is 4–5 Nm.

Warranty

The product has a warranty period of 10 years.

Add to Compare Save and send

MAKuick One-piece Mount, Sauer 303, LM rail Specifications

ManufacturerMAK
SKU5072-40133
Mount seriesMAKuick
Suitable forSauer 303
Mount TypeDetacheable mounts
Scope / Sight type

In this category, it is listed whether the mount is attached to the optical device with rings or via rail. In the red dot sight adapters section, it is written which red dot sight the adapter is made for.

If the mount is attached to the optical device with rings, the ring diameter is listed:

  • 25.4 mm/1 inch (in most cases interchangeable with 26 mm)

  • 30 mm

  • 34 mm

  • 35 mm

  • 36 mm

  • 40 mm

Ring diameter

If the mount is attached to the optical device with rail, the rail type is listed:

  • LM rail

  • Zeiss ZM/VM rail

  • Swarovski SR rail

  • S&B Convex rail

  • Picatinny rail

  • Pulsar Apex, Trail, Digisight

  • Dedal NV

  • Fortuna General

Rail types

In the red dot sight adapters section, it is written which red dot sight the adapter is for:

  • Docter sight mounts

  • Aimpoint Micro mounts

  • Zeiss compact

  • Trijicon MRO

  • Shield sights

  • C-more

  • ...

LM rail
BH height

BH stands for Bauhöhe (ger.) which means overall height. It is measured from the mounting surface of the rifle to the lower surface of the riflescope's tube.

BH height

12 mm
Extension (KR)

KR stands for Kröpfung (ger.) which means extension. This is the distance between the mounting surface and the front ring, measured horizontally. If the ring is exactly above the mounting surface, the KR is 0 mm.

Extension

KR 0.0 mm
Inclination

Often, the elevation adjustment that the riflescope offers is not adequate to compensate for the bullet drop when shooting at long range. When the riflescope runs of out of elevation, a mount with an inclination is needed. 20 MOA is the most common inclination. With it, the user gains 58.2 cm / 100 m of additional elevation range when shooting at the range of 100 m. This is approx. 5.8 Mrad of elevation.

0 MOA
LengthN/A
Adjustable windageNo
Mounts FashionDirect Mounts, Hunting One-Piece Mounts, One-Piece Mount, Repeatable Mounts
ColorBlack
MaterialAluminium
Warranty30 years
Made inGermany
Why should you trust us? We provide you with:

Reviews for MAKuick One-piece Mount, Sauer 303, LM rail

Write Your Own Review

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars
Quality
Price
Value
z Leave a message