Picatinny rail consists of slots with 5.23 mm spaces between one another, which means that it can be used across its entire length. It is simple to mount and interchangeable – if something is made for a Picatinny rail, it will fit regardless of the manufacturer or manufacturing date. It is affordable, resilient and reliable – this is why it so commonly used by professionals and military. Because of all its great qualities, Picatinny rail has been dominating the rail market in the recent years.
Picatinny is a big step forward from the Weaver standard. Weaver has a few predesignated slots while Picatinny has slots all over its surface, allowing the device to be mounted wherever the user finds it fitting. Weaver's slot is 3.8 mm wide, which is why all mounts made for Picatinny will also fit on a Weaver rail while those made for Weaver will not fit on a Picatinny rail. This is one of the main reasons why Picatinny is a far better mounting solution.
MAK is one of the biggest mount manufacturers in Germany. All of their Picatinny rails are manufactured from high quality steel and are known for their mat finish that does not reflect light. The edges of the rails are wavy, adding to the high-quality appearance. MAK Picatinny rails lack a slot that would allow the user to use the Picatinny rail with sights.
Mauser is a German arms manufacturer of semi-automatic pistols and bolt-action rifles. It was originally founded as Königliche Waffen Schmieden in 1811. Their designs reached high popularity and their products were exported to a number of countries. Because of their success, many other manufacturers used a similar design.
Mauser K98 is the most often produced repeating rifle in the World (approx. 60 million pieces have been made). Its name is linked to the year when it was introduced to the public – 1898. This was a standard firearm in World Wars I and II. Today, it is used mostly for hunting purposes. Many firearm manufacturers copied K98's system because of its success. This is without doubt one of the most copied systems in existence (it is used by renowned manufacturers such as Zastava, CZ, Husqvarna, Antonio Zoli etc.). Newer K98 models are made without a bulb (the older Mauser K98 models were loaded with the help of a stripper clip, which is why they had a bulb on the receiver – if you are looking for a mount for a model with bulb, click here). The newer models no longer require a bulb to be loaded. Consequently, the mounting surface is bigger.
Because so many K98 rifles were made, gunsmiths had difficulties in maintaining the same pattern when it came to drilling holes onto the receiver. Because of these different patterns, Picatinny rail manufacturers are making K98 Picatinny rails in many variations. EAW and Rusan's Picatinny rails for Mauser K98 are, for example, without holes – these have to be drilled by a gunsmith. Recknagel has a different way of manufacturing Picatinny rails for K98 – theirs have 3 holes (2 on the front part are ordinary while the back one is in the form of an ellipse, allowing the user to fix the back part of the rail regardless of the positions of holes on the receiver).
A: 22 mm
B: 102.4 mm
C: 12.8 mm
BHU: 4 mm
Remove all the stains (grease, oil etc.) from the rifle's receiver with a cleaning fluid (acetone). Once the surface is clean and dry, check whether the screws match the rail and the holes on the receiver. Make sure that the Picatinny rail is compatible with the the rifle by inspecting the mounting holes on both. Before mounting the rail permanently, apply a minimal amount of thread-locking fluid 278 or 648 on screws and contact surfaces. Be careful not to get the fluid in or near the mounting holes. Carefully clean the remaining excess fluid around the rail with a cleaning fluid. Using a torque driver, screw the screws appropriately (up to 2.2 Nm) – do not overtighten.
The product has a warranty period of 10 years.
|Mount series||MAK Picatinny rails|
|Suitable for||Mauser K98|
A, B and C markings refer to the distances between holes on the rail/mount. A is the distance between the front two holes on the rail/mount.
A, B and C markings refer to the distances between holes on the rail/mount. B is the distance between the holes in the middle (usually, that is the distance between the 2nd and 3rd hole on the rail/mount).
A, B and C markings refer to the distances between holes on the rail/mount. C is the distance between the rear two holes on the rail/mount.
BH stands for Bauhöhe (ger.) which means overall height. It is measured from the mounting surface of the rifle to the lower surface of the riflescope's tube.
Often, the elevation adjustment that the riflescope offers is not adequate to compensate for the bullet drop when shooting at long range. When the riflescope runs of out of elevation, a mount with an inclination is needed. 20 MOA is the most common inclination. With it, the user gains 58.2 cm / 100 m of additional elevation range when shooting at the range of 100 m. This is approx. 5.8 Mrad of elevation.