Picatinny rail consists of slots with 5.23 mm spaces between one another, which means that it can be used across its entire length. It is simple to mount and interchangeable – if something is made for a Picatinny rail, it will fit regardless of the manufacturer or manufacturing date. It is affordable, resilient and reliable – this is why it so commonly used by professionals and military. Because of all its great qualities, Picatinny rail has been dominating the rail market in the recent years.
Picatinny is a big step forward from the Weaver standard. Weaver has a few predesignated slots while Picatinny has slots all over its surface, allowing the device to be mounted wherever the user finds it fitting. Weaver's slot is 3.8 mm wide, which is why all mounts made for Picatinny will also fit on a Weaver rail while those made for Weaver will not fit on a Picatinny rail. This is one of the main reasons why Picatinny is a far better mounting solution.
MAK is one of the biggest mount manufacturers in Germany. All of their Picatinny rails are manufactured from high quality steel and are known for their mat finish that does not reflect light. The edges of the rails are wavy, adding to the high-quality appearance. MAK Picatinny rails lack a slot that would allow the user to use the Picatinny rail with sights.
Heckler & Koch, a firearms manufacturing company, was established in Germany. For years, they have been cooperating with police, security forces and NATO. They manufacture assault rifles, precision rifles, machine guns, pistols etc. The company is known for development of polygonal rifling and use of polymers in weapon designs.
As the name suggests, Heckler & Koch SLB 2000 was introduced at the turn of the millennium. SLB stands for Self-Loading rifle. It features a modular design, typical for many arms produced by H&K. The weapon can feature a detachable magazine or internal 2, 5 or 10 shot magazine. It can be chambered for the following calibers: 6.5x 55, 7x64, .308 Win., .30.06 Spr., .300 Win. Mag., 8x57 and 9.3x62. There are two mounting holes on the front surface and three mounting holes on the back surface.
Heckler & Koch sold the design to Haenel. Shortly after, Haenel SLB 2000+ was released. The rifle is practically the same as H&K's original version, which is why mounts made for H&K SLB 2000 will also fit Haenel SLB 2000+.
A: 21.9 mm
B: 98.5 mm
C: 15.24 mm
C1: 15.24 mm
BHU: 0 mm
Remove all the stains (grease, oil etc.) from the rifle's receiver with a cleaning fluid (acetone). Once the surface is clean and dry, check whether the screws match the rail and the holes on the receiver. Make sure that the Picatinny rail is compatible with the the rifle by inspecting the mounting holes on both. Before mounting the rail permanently, apply a minimal amount of thread-locking fluid 278 or 648 on screws and contact surfaces. Be careful not to get the fluid in or near the mounting holes. Carefully clean the remaining excess fluid around the rail with a cleaning fluid. Using a torque driver, screw the screws appropriately (up to 2.2 Nm) – do not overtighten.
The product has a warranty period of 10 years.
|Mount series||MAK Picatinny rails|
|Suitable for||H&K SLB 2000|
A, B and C markings refer to the distances between holes on the rail/mount. A is the distance between the front two holes on the rail/mount.
A, B and C markings refer to the distances between holes on the rail/mount. B is the distance between the holes in the middle (usually, that is the distance between the 2nd and 3rd hole on the rail/mount).
A, B and C markings refer to the distances between holes on the rail/mount. C is the distance between the rear two holes on the rail/mount.
|2 x 15.24 mm|
BH stands for Bauhöhe (ger.) which means overall height. It is measured from the mounting surface of the rifle to the lower surface of the riflescope's tube.
Often, the elevation adjustment that the riflescope offers is not adequate to compensate for the bullet drop when shooting at long range. When the riflescope runs of out of elevation, a mount with an inclination is needed. 20 MOA is the most common inclination. With it, the user gains 58.2 cm / 100 m of additional elevation range when shooting at the range of 100 m. This is approx. 5.8 Mrad of elevation.