|Mount series||ERAMATIC Standard|
|Suitable for||Steyr SBS 96 B: 100.2 mm, Steyr SBS 96 B: 104.7 mm, Steyr SBS 96 B: 69 mm, Steyr SBS 96 B: 73.5 mm, Steyr SBS 96 B: 76 mm, Steyr SBS 96 B: 83 mm, Steyr SBS 96 B: 87.5 mm, Steyr SBS B: 56 mm, Steyr SBS B: 62 mm|
|Mount Type||Pivot type mounts|
|Scope / Sight type
In this category, it is listed whether the mount is attached to the optical device with rings or via rail. In the red dot sight adapters section, it is written which red dot sight the adapter is made for.
If the mount is attached to the optical device with rings, the ring diameter is listed:
If the mount is attached to the optical device with rail, the rail type is listed:
In the red dot sight adapters section, it is written which red dot sight the adapter is for:
|Swarovski SR rail|
BH stands for Bauhöhe (ger.) which means overall height. It is measured from the mounting surface of the rifle to the lower surface of the riflescope's tube.
Often, the elevation adjustment that the riflescope offers is not adequate to compensate for the bullet drop when shooting at long range. When the riflescope runs of out of elevation, a mount with an inclination is needed. 20 MOA is the most common inclination. With it, the user gains 58.2 cm / 100 m of additional elevation range when shooting at the range of 100 m. This is approx. 5.8 Mrad of elevation.