Your location is United States. Wrong location or language? Choose a different one below..
Display language is English.
Your currency is USD.
North America
Your location is United States. Wrong location or language? Click here.

EAW Steel Picatinny rail, Roessler Titan 3 / 6

Videos
Slide Share
Do you need help with this item?
Our experienced team is here to resolve any issues before, during or after you purchase this item. If you have a question don't hesitate to contact us bellow:
Contact us

EAW Steel Picatinny rail, Roessler Titan 3 / 6 Details

Introduction


Picatinny rail consists of slots with 5.23 mm spaces between one another, which means that it can be used across its entire length. It is simple to mount and interchangeable – if something is made for a Picatinny rail, it will fit regardless of the manufacturer or manufacturing date. It is affordable, resilient and reliable – this is why it so commonly used by professionals and military. Because of all its great qualities, Picatinny rail has been dominating the rail market in the recent years.

Picatinny is a big step forward from the Weaver standard. Weaver has a few predesignated slots while Picatinny has slots all over its surface, allowing the device to be mounted wherever the user finds it fitting. Weaver's slot is 3.8 mm wide, which is why all mounts made for Picatinny will also fit on a Weaver rail while those made for Weaver will not fit on a Picatinny rail. This is one of the main reasons why Picatinny is a far better mounting solution.

EAW is a German company, known for producting top-quality mounts. Their Picatinny rails, which are all made from steel, have a nice finish and come with a unique channel in the middle, allowing the user to clearly see the rifle's sights. Screws are included. EAW chooses only the best materials for their products. All of these great features; however, come at quite a steep price.


About the rifle


Company Rössler Waffen is a family-run company based in Austria, Tyrol. They have been producing firearms since 1996. Their Titan is perhaps one of the most well-known rifles worldwide. Once it was introduced to the market, the demand for it was so great that the production plant at the time was not enough. Company thus moved to a plant with greater production capacities and capabilities in Kufstein.

Rössler Titan 3 and 6 are bolt-action rifles, available in standard and magnum calibers. Standard barrel is 560 mm long while magnum is 610 mm long. Barrels are interchageable. Bolt is designed with 3 or 6 lugs which are locked directly into the barrel. Trigger is short and highly adjustable. Its receiver is tapped with 6-48 UNS holes. There are two holes at the front of the receiver and two at the rear. Housing of the action is made of aluminium. Titan 3 is chambered for .222 Rem.,  .223 Rem.,  5,6x50 Mag.,  .300 Whisper,  .22-250Rem., 6mm Norma BR and 7,62x39 while model 6 can be made for calibers  .243Win.,  6,5x55mm, 6,5x57,  6,5x65RWS, 7mm-08Rem., 7x57, .308 Win., .358 Win., 8x57 IS  25-06 Rem., .270 Win., 7x64, .30-06Spring., 6,5x47 Lapua, 6,5-284 Norma, 9,3x62, 8,5x63 Reb, 8x68S,  6,5x68, 7mm Rem. Mag., .300 Win. Mag., .375 Ruger, .270 WSM, .300 WSM and .338 Win. Mag. There are two holes on each of the two mounting surfaces. 

Rifles Rössler Titan 3 and 6 have actions of same dimensions, which is why they share the same mounts.

Rifles Rössler Titan 3 and 6 have a similar action as rifle Swiss Arms SHR 970. The radiuses of the mounting surfaces are the same but there is a difference in B distance (see the picture below). This is why two-piece mounts made for rifles Rössler Titan 3 and 6 will fit rifle Swiss Arms SHR 970 while one-piece mounts will not fit it.

Mounting details


A: 21.9 mm
B: 110 mm
C: 21.9 mm
BHU: 0 mm
Fi: 6-48
R1: R17
R2: R17


Mounting instructions


Remove all the stains (grease, oil etc.) from the rifle's receiver with a cleaning fluid (acetone). Once the surface is clean and dry, check whether the screws match the rail and the holes on the receiver. Make sure that the Picatinny rail is compatible with the the rifle by inspecting the mounting holes on both. Before mounting the rail permanently, apply a minimal amount of thread-locking fluid 278 or 648 on screws and contact surfaces. Be careful not to get the fluid in or near the mounting holes. Carefully clean the remaining excess fluid around the rail with a cleaning fluid. Using a torque driver, screw the screws appropriately (up to 2.2 Nm) – do not overtighten.


Warranty


The product has a warranty period of 30 years.


Add to Compare Save and send

EAW Steel Picatinny rail, Roessler Titan 3 / 6 Specifications

ManufacturerEAW
SKU83-00459
Mount seriesEAW Picatinny Rails
Base typePicatinny
Suitable forRoessler Titan 3 / 6
A21.9 mm
B110 mm
C21.9 mm
BH height6.5 mm
Inclination0 MOA
MaterialSteel
Length164 mm
Warranty30 years
Made inGermany
ColorBlack
Why should you trust us? We provide you with:

Reviews for EAW Steel Picatinny rail, Roessler Titan 3 / 6

Write Your Own Review

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars
Quality
Price
Value

Get more info about this product

z Leave a message