Picatinny rail consists of slots with 5.23 mm spaces between one another, which means that it can be used across its entire length. It is simple to mount and interchangeable – if something is made for a Picatinny rail, it will fit regardless of the manufacturer or manufacturing date. It is affordable, resilient and reliable – this is why it so commonly used by professionals and military. Because of all its great qualities, Picatinny rail has been dominating the rail market in the recent years.
Picatinny is a big step forward from the Weaver standard. Weaver has a few predesignated slots while Picatinny has slots all over its surface, allowing the device to be mounted wherever the user finds it fitting. Weaver's slot is 3.8 mm wide, which is why all mounts made for Picatinny will also fit on a Weaver rail while those made for Weaver will not fit on a Picatinny rail. This is one of the main reasons why Picatinny is a far better mounting solution.
EAW is a German company, known for producting top-quality mounts. Their Picatinny rails, which are all made from steel, have a nice finish and come with a unique channel in the middle, allowing the user to clearly see the rifle's sights. Screws are included. EAW chooses only the best materials for their products. All of these great features; however, come at quite a steep price.
Mauser is a German arms manufacturer of semi-automatic pistols and bolt-action rifles. It was originally founded as Königliche Waffen Schmieden in 1811. Their designs reached high popularity and their products were exported to a number of countries. Because of their success, many other manufacturers used a similar design.
M94 is a bolt-action rifle, mainly used during World War II. Its action has two holes on the front mounting surface and three holes on the back mounting surface. The magazine is designed as a double row box type and holds three or four rounds, depending on the caliber of the rifle. Standard calibers for this rifle are: 7 mm Rem. Mag. .300 Win. and Mag. 8x86 S. Standard barrel length of classic M94 is 560 mm; length of the Magnum model's barrel is 610 mm. This rifle uses a direct locking system with 6 locking lugs. Opening angle is 60°. The ejection port is located on the right side of the rifle; left side is blocked. Cartridge is automatically removed from the rifle. The action is controlled-feed.
Mounts made for rifles Mauser M94/M96 will fit rifles with an action of same dimensions: Remington 700 Long action, Sauer 100, Sauer 101, Roessler Titan 16, Haenel Jäger 10, Bergara B14 and Sabatti Rover. Mounts made for these rifles can be mounted on rifles Mauser M94/M96 as well.
A: 21.9 mm
B: 100 mm
C: 15.3 mm
C1: 15.3 mm
BHU: 2 mm
Remove all the stains (grease, oil etc.) from the rifle's receiver with a cleaning fluid (acetone). Once the surface is clean and dry, check whether the screws match the rail and the holes on the receiver. Make sure that the Picatinny rail is compatible with the the rifle by inspecting the mounting holes on both. Before mounting the rail permanently, apply a minimal amount of thread-locking fluid 278 or 648 on screws and contact surfaces. Be careful not to get the fluid in or near the mounting holes. Carefully clean the remaining excess fluid around the rail with a cleaning fluid. Using a torque driver, screw the screws appropriately (up to 2.2 Nm) – do not overtighten.
The product has a warranty period of 30 years.
|Mount series||EAW Picatinny Rails|
|Suitable for||Bergara B14, Haenel Jager 10, Mauser M 94, Mauser M 96, Mauser M 97, Remington 700 LA, Remington 78, Roessler Titan 16, Sabatti Rover LA, Sauer 100, Sauer 101|
|BH height||6.5 mm|