Picatinny rail consists of slots with 5.23 mm spaces between one another, which means that it can be used across its entire length. It is simple to mount and interchangeable – if something is made for a Picatinny rail, it will fit regardless of the manufacturer or manufacturing date. It is affordable, resilient and reliable – this is why it so commonly used by professionals and military. Because of all its great qualities, Picatinny rail has been dominating the rail market in the recent years.
Picatinny is a big step forward from the Weaver standard. Weaver has a few predesignated slots while Picatinny has slots all over its surface, allowing the device to be mounted wherever the user finds it fitting. Weaver's slot is 3.8 mm wide, which is why all mounts made for Picatinny will also fit on a Weaver rail while those made for Weaver will not fit on a Picatinny rail. This is one of the main reasons why Picatinny is a far better mounting solution.
EAW is a German company, known for producting top-quality mounts. Their Picatinny rails, which are all made from steel, have a nice finish and come with a unique channel in the middle, allowing the user to clearly see the rifle's sights. Screws are included. EAW chooses only the best materials for their products. All of these great features; however, come at quite a steep price.
Heym is a firearms manufacturer from Germany, founded in 1865 – they have over 150 years of experience. Their rifles, known for great handling, durability and accuracy, are still manufactured by hand.
SR30 is known for having one of the best straight-pull bolt designs. The bolt has three positions: half-cock position (100°), where both the bolt and its ball bearing are locked in place; the 85° position where the safety is released (the firing pin and trigger mechanism are set); and the final position which happens after firing when the user pulls the bolt handle back (ball bearings are retracted, the cartridge is ejected from the action). The top of SR30's action is rounded. The bolt is straight, allowing the user to mount the sight low on the action. There are 2 mounting holes on both mounting surfaces.
A: 21.9 mm
B: 118.5 mm
C: 12.8 mm
BHU: 1.5 mm
R1: 16.5 mm
R2: 15 mm
Remove all the stains (grease, oil etc.) from the rifle's receiver with a cleaning fluid (acetone). Once the surface is clean and dry, check whether the screws match the rail and the holes on the receiver. Make sure that the Picatinny rail is compatible with the the rifle by inspecting the mounting holes on both. Before mounting the rail permanently, apply a minimal amount of thread-locking fluid 278 or 648 on screws and contact surfaces. Be careful not to get the fluid in or near the mounting holes. Carefully clean the remaining excess fluid around the rail with a cleaning fluid. Using a torque driver, screw the screws appropriately (up to 2.2 Nm) – do not overtighten.
The product has a warranty period of 30 years.
|Mount series||EAW Picatinny Rails|
|Suitable for||Heym SR 30|
|BH height||6.5 mm|