Your location is United States. Wrong location or language? Choose a different one below..
Display language is English.
Your currency is USD.
North America
Your location is United States. Wrong location or language? Click here.

EAW Steel Picatinny rail, Heym SR 30

Videos
Slide Share
Do you need help with this item?
Our experienced team is here to resolve any issues before, during or after you purchase this item. If you have a question don't hesitate to contact us bellow:
Contact us

EAW Steel Picatinny rail, Heym SR 30 Details

Introduction


Picatinny rail consists of slots with 5.23 mm spaces between one another, which means that it can be used across its entire length. It is simple to mount and interchangeable – if something is made for a Picatinny rail, it will fit regardless of the manufacturer or manufacturing date. It is affordable, resilient and reliable – this is why it so commonly used by professionals and military. Because of all its great qualities, Picatinny rail has been dominating the rail market in the recent years.

Picatinny is a big step forward from the Weaver standard. Weaver has a few predesignated slots while Picatinny has slots all over its surface, allowing the device to be mounted wherever the user finds it fitting. Weaver's slot is 3.8 mm wide, which is why all mounts made for Picatinny will also fit on a Weaver rail while those made for Weaver will not fit on a Picatinny rail. This is one of the main reasons why Picatinny is a far better mounting solution.

EAW is a German company, known for producting top-quality mounts. Their Picatinny rails, which are all made from steel, have a nice finish and come with a unique channel in the middle, allowing the user to clearly see the rifle's sights. Screws are included. EAW chooses only the best materials for their products. All of these great features; however, come at quite a steep price.

About the rifle


Heym is a firearms manufacturer from Germany, founded in 1865 – they have over 150 years of experience.  Their rifles, known for great handling, durability and accuracy, are still manufactured by hand.

SR30 is known for having one of the best straight-pull bolt designs. The rifle was introduced at IWA in 1996 and is already a deviation from the Mauser M98 locking system (the bolt is now pulled straight back). The bolt has three positions: half-cock position (100°), where both the bolt and its ball bearing are locked in place; the 85° position where the safety is released (the firing pin and trigger mechanism are set); and the final position which happens after firing when the user pulls the bolt handle back (ball bearings are retracted, the cartridge is ejected from the action). The top of SR30's action is rounded. It is chambered for these calibers: .243 Win., 6x62 Freres, 6.5x55SM, 6.5x57 mm, 6.5x65 RWS, .270 Win., 7x57 mm, 7x64 mm, .308 Win., .30-06 Sprg., 8x57 mm and 9.3x62 mm, .22-250 Rem., .26-06 Rem and 8x64S. In 2000, a left-handed version was introduced in all the usual calibers. The bolt is straight, allowing the user to mount the sight low on the action. There are 2 mounting holes on both mounting surfaces.

Mounting details

A: 21.9 mm
B: 118.5 mm
C: 12.8 mm
BHU: 1.5 mm
Fi: 6-48L
R1: R16.5
R2: R15

Mounting instruction


Remove all the stains (grease, oil etc.) from the rifle's receiver with a cleaning fluid (acetone). Once the surface is clean and dry, check whether the screws match the rail and the holes on the receiver. Make sure that the Picatinny rail is compatible with the the rifle by inspecting the mounting holes on both. Before mounting the rail permanently, apply a minimal amount of thread-locking fluid 278 or 648 on screws and contact surfaces. Be careful not to get the fluid in or near the mounting holes. Carefully clean the remaining excess fluid around the rail with a cleaning fluid. Using a torque driver, screw the screws appropriately (up to 2.2 Nm) – do not overtighten.

Warranty


The product has a warranty period of 30 years.


Add to Compare

EAW Steel Picatinny rail, Heym SR 30 Specifications

ManufacturerEAW
SKU83-00206
Mount seriesEAW Picatinny Rails
Base typePicatinny
Suitable forHeym SR 30
A21.9 mm
B118.50 mm
C12.8 mm
BH height6.5 mm
Inclination0 MOA
MaterialSteel
Length163 mm
Warranty30 years
Made inGermany
ColorBlack
Why should you trust us? We provide you with:

Reviews for EAW Steel Picatinny rail, Heym SR 30

Write Your Own Review

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars
Quality
Price
Value
z Leave a message