Your location is United States. Wrong location or language? Choose a different one below..
Display language is English.
Your currency is USD.
North America
Your location is United States. Wrong location or language? Click here.

EAW Steel Picatinny rail, Fabarm Iris

Videos
Slide Share
Do you need help with this item?
Our experienced team is here to resolve any issues before, during or after you purchase this item. If you have a question don't hesitate to contact us bellow:
Contact us

EAW Steel Picatinny rail, Fabarm Iris Details

Introduction

Picatinny rail consists of slots with 5.23 mm spaces between one another, which means that it can be used across its entire length. It is simple to mount and interchangeable – if something is made for a Picatinny rail, it will fit regardless of the manufacturer or manufacturing date. It is affordable, resilient and reliable – this is why it so commonly used by professionals and military. Because of all its great qualities, Picatinny rail has been dominating the rail market in the recent years.

Picatinny is a big step forward from the Weaver standard. Weaver has a few predesignated slots while Picatinny has slots all over its surface, allowing the device to be mounted wherever the user finds it fitting. Weaver's slot is 3.8 mm wide, which is why all mounts made for Picatinny will also fit on a Weaver rail while those made for Weaver will not fit on a Picatinny rail. This is one of the main reasons why Picatinny is a far better mounting solution.

EAW is a German company, known for producting top-quality mounts. Their Picatinny rails, which are all made from steel, have a nice finish and come with a unique channel in the middle, allowing the user to clearly see the rifle's sights. Screws are included. EAW chooses only the best materials for their products. All of these great features; however, come at quite a steep price.



About the rifle

Fabarm was established around 1900 by the Galesi family in Brescia, Italy. At the beginning, they produced mostly pistols and side-by-side shotguns. During the 1950s, Fabarm started producing compressed air rifles and Flaubert carbines followed by its first semi auto shotgun, the Fabarm Goldenmatic.

Fabarm Iris is a bolt-action rifle with 60 degree bolt lift that can be chambered for the following calibers: .223 Rem., .243 Win., .270 Win., .308 Win., 7x64, .30-06 Spr., 9,3x62, .270 WSM and .300 WM. It has a manual cocking system with a 60° bolt lift and features a free floating barrel made in Germany. The user can choose from DTG (Direct trigger system) or STG (Set trigger system). There are two mounting holes on each side of the mounting surface. The ejection port is located on the right side.

Mounts made for Fabarm Iris will also fit Browning Bar, Acera, Maral, BLR Takedown and Benelli Argo since the actions of these rifles are of the same diameter throughout their entire length.

Mounting details

A: 13 mm
B: 81 mm
C: 13 mm
BHU:
Fi:
R1:
R2:


Mounting instructions

Remove all the stains (grease, oil etc.) from the rifle's receiver with a cleaning fluid (acetone). Once the surface is clean and dry, check whether the screws match the rail and the holes on the receiver. Make sure that the Picatinny rail is compatible with the the rifle by inspecting the mounting holes on both. Before mounting the rail permanently, apply a minimal amount of thread-locking fluid 278 or 648 on screws and contact surfaces. Be careful not to get the fluid in or near the mounting holes. Carefully clean the remaining excess fluid around the rail with a cleaning fluid. Using a torque driver, screw the screws appropriately (up to 2.2 Nm) – do not overtighten.

Warranty

The product has a warranty period of 30 years.


Add to Compare Save and send

EAW Steel Picatinny rail, Fabarm Iris Specifications

ManufacturerEAW
SKU83-00220
Mount seriesEAW Picatinny Rails
Base typePicatinny
Suitable forBenelli ARGO / Spec., Browning Acera, Browning BAR I / BAR II, Browning Maral, Fabarm Iris
A13 mm
B81.00 mm
C13 mm
BH height6.5 mm
Inclination0 MOA
MaterialSteel
Length140 mm
Warranty30 years
Made inGermany
ColorBlack
Why should you trust us? We provide you with:

Reviews for EAW Steel Picatinny rail, Fabarm Iris

Write Your Own Review

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars
Quality
Price
Value

Get more info about this product

z Leave a message