Anschutz 1771

The History of Anschutz

On the first of July in 1856, the son of the master gunsmith Johann Heinrich Gottlieb Anschütz, Julius Gottfried Anschütz founded the company J.G. ANSCHÜTZ in Zella-Mehlis, Thuringia. Forty years later, they relocated from the small workshop to their first factory with 76 employees. The founder of the J.G. ANSCHÜTZ company passed away in 1901. His sons Fritz and Otto took over their father's work. The latter died in 1923. The company was continued by Fritz August Anschütz supported by his two sons Max Fritz and Rudolf Charles Anschütz, the third ANSCHÜTZ generation. The factory was closed down and then destroyed and seized after the war.

1950 was the year of a fresh start in the Danube Bastion in Ulm where the company J.G. ANSCHÜTZ GmbH was founded. 7 people and 20 machines initially handled air pistols and gun repairs; afterward, Flobert rifles (rimfire rifles) and Match rifles were added. After the first sport shooting success, further successes came one after the other. Max Schmeling, a former boxing champion, also competed for Germany on the clay pigeon shooting national team. He was familiar with ANSCHÜTZ rifles because he was a target shooter and a hunter. He purchased some of them in Ulm and even suggested a change in the company's logo.

Dieter Anschütz, a member of the fourth generation, took over management in 1968 and proved himself as a good leader. The catchphrase "DIE MEISTER MACHER" was born out of the achievements of the ANSCHÜTZ target actions across the globe. It still holds true today. As managing director since 1992, Jochen Anschütz continues to administer the company with the aid of his son.

Anschutz 1771 Rifle Review

Anschutz 1771 is a centerfire bolt-action rifle derived from Anschutz 1781, made for short-action. It can be used for both, hunting and sport shooting, as it is incredibly precise.

Its push-feed steel action consists of a robust bolt with two rows of three locking lugs and an adjustable trigger that comes preset at 1200 g (2.64 lbs) but can be adjusted from 1000 to 2000 g (2.2 to 4.4 lbs). The rifle gets cocked by opening the bolt, which moves smoothly and opens at a sixty-degree angle. The pull length equals 363 mm (14.3-inches). A two-position safety is attached to the rear right of the action in form of a catch. The extractor grabs the case of a cartridge extremely firmly thanks to the flawless mechanism behind it. Mounting scopes onto the rifle is simple as it comes equipped with a Picatinny rail, giving the buyer plenty of options.

The rifle's default barrel is 520 mm (20.5-inches) long, while its overall length is 1029 mm (40.5-inches). Its detachable magazine has a capacity of 4+1 cartridges.

Anschutz 1771, chambered for .17 Hornet

Figure 1: Anschutz 1771, chambered for .17 Hornet (Source: https://www.guntrader.uk/guns/rifles/anschutz/bolt-action/17-hornet/1771-thumbhole-the-finest-17-hornet-210718110455001)

Anschutz 1771 Calibers

Anschutz 1771 is chambered for the following calibers:

.17 Hornet
.22 Hornet
.222 Rem.
.223 Rem.

Anschutz 1771 Variants

Anschutz 1771 is available in the following variants:

German stock
Thumbhole stock
DJV stock

Anschutz 1771 receiver, chambered for .17 Hornet

Figure 2: Anschutz 1771 receiver, chambered for .17 Hornet (Source: https://www.guntrader.uk/guns/rifles/anschutz/bolt-action/17-hornet/1771-thumbhole-the-finest-17-hornet-210718110455001)

Scope Mounts Interchangeable with Anschutz 1771

Rifles that have one-piece mounts interchangeable with Anschutz 1771

For one-piece mounts to fit on a rifle, the mounting surfaces of these rifles must match in all dimensions. The following rifles are interchangeable:

All rifles with a Picatinny rail

Rifles that have two-piece mounts interchangeable with Anschutz 1771

For two-piece mounts to fit on a rifle, mounting surfaces must match in all dimensions except the B distance. B distance can vary because two-piece mounts can be installed and adjusted closer or further apart. The following rifles are interchangeable:

All rifles with a Picatinny rail

Best Scope Mounts for Anschutz 1771

Fixed Scope Mounts for Anschutz 1771

We recommend the ERA-TAC Ultralight Scope Mount made in Germany with a flawless low weight design. It is made of aluminum and comes with a ten-year warranty.

Detachable Repeatable Scope Mounts for Anschutz 1771

If you plan on using various scopes on your rifle, then this scope mount from the German manufacturer, Henneberger, is the way to go. The scope mount is made of steel and comes with a thirty-year warranty.

Help us Build Our Riflescope Mounts Database

If you happen to own this or any other rifle, we would appreciate it if you could help us expand our database by sending us some photos of the rifle receiver (the bare mounting surface of the rifle without the mounts installed). For your help, our company offers a fair return in terms of practical rewards.

Please send us an email for more information. You can contact us here: [email protected]

Compatibility Above

Filters

Sort

In stock

Spuhr Unimount for Picatinny, 34mm, 6 MIL / 20.6 MOA

As low as NOK 3,804.12

View Product

Anschutz 1771

The History of Anschutz

Anschutz 1771 Rifle Review

Anschutz 1771 Calibers

Anschutz 1771 Variants

Scope Mounts Interchangeable with Anschutz 1771

Rifles that have one-piece mounts interchangeable with Anschutz 1771

Rifles that have two-piece mounts interchangeable with Anschutz 1771

Best Scope Mounts for Anschutz 1771

Fixed Scope Mounts for Anschutz 1771

Detachable Repeatable Scope Mounts for Anschutz 1771

Help us Build Our Riflescope Mounts Database

General features of Mono-block Scope Mounts

Mono-block mounts for tactical rifles

Other Features of Mono-block Scope Mounts

Leave us a message

Your wishlist