Tikka M65

About the Tikka

Tikkakoski was at first a metal workshop established in 1893 in Jyväskylä, Finland, which later, at the end of World War I in 1918 evolved into a factory that produced gun components. One of the most important guns of Tikka in the 20th century is most definitely Suomi KP/-31, which is regarded as one of the most successful submachine guns of World War II.

Tikkakoski and Sako cooperated on a prototype rifle series in 1981 and soon after that, Tikkakoski was acquired by Sako. By the end of the decade, the production of Tikka rifles has already shifted from Jyväskylä to Sako headquarters in Riihimäki. Tikka still holds on to their traditional gunsmith craftsmanship, visually inspecting every rifle barrel and then manually testing the rifle with test shots. In 2009 Beretta group took over Sako, which got Sako and Tikka access to the most advanced production methods.

Tikka M65 Rifle Review

Tikka M65 was in production since 1969 to 1989 and it was called LSA65 in the first two years and then renamed to M65. It was designed to serve as a long action rifle, because M55 could only use cartridges of size up to 55mm, while M65 could use cartridges of length up to 65mm.

On top, it has a 16.5 mm dovetail (with the lack of recoil notch) machined on the receiver for the purpose of attaching optics, along with 4 holes for the screws. The dovetail is fully disconnected, the middle part of the dovetail above the bolt doesn’t have dovetail notch on either side, which means the insertion of cartridges directly into chamber is very accessible at the expense of less rigid rifle and that could potentially lead to worse shot accuracy in some cases.

You can read more about how mounting system changed on Tikka rifles through time here.

Tikka M65

Source:https://greatnorthgunco.ca/product/tikka-m65-30-06/

Tikka M65

Source: https://www.gunauction.com/buy/8085975

Tikka M65 is chambered for:

.25-06 Rem
6.5×55mm
.270 Win
7×57mm
7×64mm
7mm Rem Mag
.308 Win
.30-06 Springfield
.300 Win Mag
.338 Win Mag
9.3×62mm

It comes in variants:

standard
heavy barrel
wildboar
sporter
super sporter

Tikka M65

A: 22 mm
B: 109 mm
C: 22 mm

Which rifles have interchangeable mounts

Two-piece mounts for the following Tikka rifles,

M55
M590/M690
M595/M695

which are meant to be installed on 4 tapped mounting holes will fit this rifle as well.

Our recommendation for mounts

Fixed mounts:

For fixed mounts on this rifle, we recommend Optilock Tikka Base mounting bases. We can insert rings onto these bases, but we must be careful, because Optilock rings are available only for 1inch (25.4mm), 30mm and 34mm diameter scope tubes. One special feature of the Optilock rings are the polymer inserts (except the 34mm ring, which does not include inserts), which prevent scratches on the scope. If we want to install scopes with rails or scopes with tube diameters other than these of Optilock rings, we need to reach for rings of other companies like Recknagel, EAW or Osuma, and they fit Optilock bases as well.

Optilock base for Tikka M55

Detachable repeatable mounts:

For Tikka M65 repeatable mounts, we would recommend to first install Picatinny rails and then install any detachable repeatable mount that fits Picatinny rails on top of them.

If you would prefer to have detachable repeatable mounts without Picatinny rails, we would recommend MAKlassic pivot mounts.

Picatinny rails:

The best option for installation of Picatinny rails would be the rails of Osuma:

It is worth mentioning, that these rails are made of aluminium, while the rifle receiver is made of steel, therefore the combination is not ideal, because of the mechanical reasons. More about that in our article:

Aluminium vs. Steel Picatinny rail

Help us build our riflescope mounts database

If you have this rifle or any other rifle at home, we would really appreciate it if you could send us some photos of the rifle receiver (mounting surface of the rifle when there are no mounts installed), because it would help us expand our rifle mounts database. If you send us a photo of rifle receiver which we don’t already have, that would be of great value to us and we will definitely reward you for your help.

Please send us an email for more information. You can contact us here: [email protected]

Compatibility Above

Filters

Sort

In stock

EAW Adapter for dovetail with adjustable lever, Aimpoint Micro

As low as NOK 974.93

View Product

Add to compare

In stock

EAW Adapter for dovetail with adjustable lever, Docter-Sight

As low as NOK 942.20

View Product

Add to compare

In stock

Rusan Roll-off Rings, Tikka T3, 25.4 mm, Q-R

As low as NOK 1,180.46

View Product

Add to compare

In stock

EAW Adapter for dovetail with adjustable lever, Zeiss Compact-Point

As low as NOK 942.43

View Product

Add to compare

In stock

Aimpoint Micro QD for Tikka T3/T3x

NOK 1,613.66

Add to compare

In stock

Henneberger HMS Docter Sight mount with lever for Tikka T3

NOK 1,353.74

Add to compare

In stock

Recknagel Mount for Docter sight, Quick release

As low as NOK 1,353.74

View Product

Add to compare

In stock

Rusan Roll-off mount with extension, 16.5 mm rail, SR rail, Q-R

NOK 1,180.46

Add to compare

In stock

Aimpoint Acro QD for Tikka T3/T3x

NOK 1,397.06 NOK 1,505.36

Add to compare

Filters

Sort

VIDEO

Repeatable mounts take all advantages of detachable mounts to a new level. All the advantages of detachable mounts, which are:

Detachable mounts offer possibility to use multiple scopes on one rifle,
enable easy transportation of the scope and the rifle separately,
in an emergency if the scope fails you can immediately detach it and use iron sights are upgraded with,
100% repeatability, which means that you zero all your scopes only once and then you can use them on one rifle in any combination you prefer and as many times as you wish.

Such mounts are ideal for hunting rifles, where you can use the same rifles with different optics on many different types of hunts. The perfect combination of different optics on one rifle can be described in this fashion:

Red dot sight or wide angle riflescope for driven hunts,
1.5-6x42 or similar for stalking,
3-12x56 for low light hunting.

You can add as many different optics to this setup as you wish, since this is the main concept of repeatable mounts. Easy transportation of optics and rifle separately is only an additional bonus.

There are however many different types of repeatable mounts, of which the most common are:

Pivot mounts,
Weaver/Picatinny repeatable mounts,
Repeatable mounts on brand specific mounting solutions: Blaser Saddle mount, Merkel Suhl Tilt-Up mounts, Sauer 404, Sauer 303 , CZ 550, Mauser M03, Steyr original pivot mount, Merkel original pivot mount,

Dentler basis mounts,
Contessa 12 mm mounts.

There are also many other similar repeating mounts.

Repeatable Mounts | Optics Trade Debates

Tikka M65

About the Tikka

Tikka M65 Rifle Review

Which rifles have interchangeable mounts