Product: Zeiss Conquest Compact 10×25 T*
INSTRUCTIONS FOR USE
Congratulations on your powerful new binoculars. Enjoy the experience of undistorted image reproduction, the quality and effectiveness of which reflect our high standards.
The ZEISS brand is famous for outstanding optical achievements, precision workmanship and long service life.
Please observe the following instructions for use in order to obtain the best from your binoculars and to ensure that they remain your constant companion for many years to come.
When folding the binoculars, ensure that both barrels, together with the middle part, form a Z shape as shown in Fig. 2.
This gives the binoculars a space-saving form which allows them to be more safely and easily stored in the case.
To unfold the binoculars, simply pull both halves away from each other.
Viewing with and without eyeglasses
If you do not wear glasses when viewing, use the binoculars with the eyecups extended as shown in Fig. 1/A.
If you wear glasses when viewing, pull the edge of the soft rubber eyecups as far as possible past the upper edge of the eyepiece as shown in Fig. 1/B.
Adjustment of the interpupillary distance
Adjust the two barrels relative to each other until you see one circular field of view when viewing with both eyes.
The binoculars have a centre focusing mechanism (focusing knob Fig. 1/C) and a dioptre adjustment wheel (Fig. 1/D). For focusing, close your right eye and focus the image in the left barrel using the centre focusing mechanism (Fig. 1/C). Then close your left eye – and if necessary – adjust the focus in the right barrel using the dioptre adjustment wheel.
The dioptre adjustment wheel is provided with a scale, the signs “+” and “–”, and a click stop in the zero position (0 D). The graduation lines of the scale are used for orientation (setting the dioptre adjustment for different users).
Note: Always use the same object to focus on both images! For subsequent focusing on varying distances, use the focusing knob only (Fig. 1/C).
Care and maintenance
ZEISS binoculars need no special care or maintenance. Do not wipe off coarse dirt particles (e. g. sand) from the lenses, but blow them off or remove them with a soft brush. Fingerprints on the lens surfaces may affect them in the course of time. The easiest way to keep the lenses clean is by breathing on them and wiping with a soft optical cleaning cloth or optical cleaning paper.
To avoid a possible fungal coating which is common in the tropics, store the optics in a dry place and always ensure good aeration of the lens surface.
Do not under any circumstances look through the binoculars at the sun or laser light sources! Serious eye injury may otherwise result.
Spare parts for ZEISS CONQUEST COMPACT T* Binoculars
|8×20 T*||10×25 T*|
|Objective lens diameter (mm)||20||25|
|Field of view at 1000 m (m)||115||95|
|Exit pupil (mm)||2,5||2,5|
|Shortest focusing distance (m)||3,3||5,5|
|Dioptre adjustment range ≥||+/- 2 dpt||+/- 2 dpt|
|PD from/to (mm)||33 – 75||33 – 75|
|Height with folded eyecup (mm)||93||110|
|Width with PD of 65 mm (mm)||93||97|
|Maximum width (mm)||101||104|
Subject to changes in design and scope of delivery as a result of ongoing tehnical development.