Skip to content

Rifles With Roessler Titan 16 Scope Mounting Surface

The Rössler Titan 16 is a straight pull bolt action rifle featuring 16 locking lugs that lock directly into the barrel, enhancing safety with their large contact surface. This design was adopted from the Mauser M1996, to which the Titan 16 is very similar, sharing the straight pull mechanism and number of locking lugs.

The rifle is offered in two barrel lengths: 560 mm (22-inch) for standard calibers and 610 mm (24-inch) for magnum calibers, with the capability to switch barrels to adapt to various shooting requirements. It accepts magazines ranging from 2 to 5 rounds capacity. Additionally, the receiver of the Titan 16 is made of carbonitrided steel and is drilled and tapped with 5 holes for scope mounting purposes.

Rifles That Have Two-Piece Scope Mounts Interchangeable With Roessler Titan 16

As shown in the main article on interchangeability, the  Rössler Titan 16  has two-piece scope mounts interchangeable with various other rifles. These rifles may have different B distances from the  Rössler Titan 16 model but share other critical mounting parameters like A and C distancesradiuses, and BHU. This means that the listed rifles below should feature two-piece scope mounts interchangeable with the  Rössler Titan 16.

Technical drawing of the mounting surface
Two-Piece Scope Mounting System

Below is a list of all rifles that have two-piece scope mounts interchangeable with the Rössler Titan 16 mounting surface.

Mounting Standards With Interchangeable One-Piece Scope Mounts

Given the list of rifles that have two-piece scope mounts interchangeable with the Rössler Titan 16, there are certain cases where a specific group of rifles within the two-piece interchangeability list shares a certain B distance, creating its own sub-standard.

In simpler terms, this means that rifles in such a group will have two-piece scope mounts interchangeable with the mounting surface of the Titan 16, but will also have one-piece scope mounts interchangeable between themselves because they share that same B distance.

One-Piece Scope Mounting System

All the rifles listed below should have two-piece scope mounts interchangeable with Titan 16 and one-piece mounts between themselves.

Rössler Titan 16

The Rössler Titan 16 is a straight pull bolt action rifle featuring 16 locking lugs that lock directly into the barrel, enhancing safety with their large contact surface. The rifles listed below will have two-piece scope mounts interchangeable with the Titan 16 mounting surface but will also have one-piece scope mounts interchangeable among themselves because they share the same B distance.

Summary
Rifles With Roessler Titan 16 Scope Mounting Surface
Article Name
Rifles With Roessler Titan 16 Scope Mounting Surface
Description
This article lists rifles in specific sub-groups under the Roessler Titan 16 mounting surface with interchangeable scope mounts.
Author
Publisher Name
Optics Trade
Publisher Logo

SHARE THIS POST

YOU MIGHT ALSO LIKE

Leave a Reply

Your email address will not be published. Required fields are marked *