Skip to content

Rifles With Kimber 8400 Scope Mounting Surface

The Kimber 8400 is a bolt-action centerfire rifle line that includes two models: the 8400 WSM and the newer 8400 Magnum. Introduced in 2009, the 8400 Magnum extends the original 8400 WSM design by 23.4 mm to accommodate longer calibers. It features a free-floated barrel, a three-position safety lever at the rear of the receiver, and a Match-grade trigger set to approximately 1587 g (3.5 lbs). The rifle is available with either wooden or polymer stocks, includes a Mauser-style claw extractor, and has a magazine capacity of five rounds, reduced to four for magnum calibers. Both models in the 8400 line are drilled and tapped for scope mounts.

Rifles That Have Two-Piece Scope Mounts Interchangeable With Kimber 8400

The Kimber 8400 is available in two action lengths, the 8400 WSM (short action) and the 8400 Magnum (long action), and features two-piece scope mounts that are interchangeable across both versions. Although the WSM and Magnum versions may have different B distances, they share critical mounting parameters such as A and C distances, radiuses, and BHU. This compatibility ensures that the two-piece scope mounts can be used interchangeably between the short-action and long-action models of the 8400 series.

Technical drawing of the mounting surface
Two-Piece Scope Mounting System

Below is a list of rifles that have two-piece scope mounts interchangeable with the Kimber 8400.

Should you happen to know about any other rifle that shares the mounting dimensions with the Kimber 8400, we kindly ask you to share this information with us so that we can expand our database accordingly.

Mounting Standards With Interchangeable One-Piece Scope Mounts

For one-piece scope mounts to be interchangeable between rifles, the mounting surfaces on the rifles must match all parameters, including the crucial middle B distance.

One-Piece Scope Mounting System

Currently, we are not aware of any rifles that share the mounting surface with the Kimber 8400, therefore, we cannot provide a list of rifles that have one-piece scope mounts interchangeable with the the 8400 model.

If you know of any rifles that share the mounting dimensions with the Kimber 8400, please share this information with us. Your contribution is crucial for us to maintain an accurate and comprehensive database.

Rifles With Kimber 8400 Scope Mounting Surface
Article Name
Rifles With Kimber 8400 Scope Mounting Surface
This article lists rifles in specific sub-groups under the Kimber 8400 mounting surface with interchangeable scope mounts.
Publisher Name
Optics Trade
Publisher Logo



Leave a Reply

Your email address will not be published. Required fields are marked *