The Anschutz 1780 is a bolt-action rifle known for its smooth push-feed action and is part of Anschutz’s top range of bore hunting rifles. It features a bolt with six locking lugs arranged in two rows and a high-grade aluminum receiver that is drilled and tapped with five holes for scope mounting. The model includes a 5-round capacity detachable magazine, a 5780 D trigger, and comes equipped with Anschutz’s front iron sights. The 1780 has a total length of approximately 1090 mm (42.9 inches) and weighs about 3200 g (7.1 lbs).
Rifles That Have Two-Piece Scope Mounts Interchangeable With Anschutz 1780
As shown in the main article on interchangeability, the Anschutz 1780 has two-piece scope mounts interchangeable with various other rifles. These rifles may have different B distances from the Anschutz 1780 model but share other critical mounting parameters like A and C distances, radiuses, and BHU. This means that the listed rifles below should feature two-piece scope mounts interchangeable with the Anschutz 1780.
Below is a list of all rifles that have two-piece scope mounts interchangeable with the Anschutz 1700 mounting surface.
Mounting Standards With Interchangeable One-Piece Scope Mounts
Given the list of rifles that have two-piece scope mounts interchangeable with the Anschutz 1780, there are certain cases where a specific group of rifles within the two-piece interchangeability list shares a certain B distance, creating its own sub-standard.
In simpler terms, this means that rifles in such a group will have two-piece scope mounts interchangeable with the mounting surface of the Anschutz 1780, but will also have one-piece scope mounts interchangeable between themselves because they share that same B distance.
All the rifles listed below should have two-piece scope mounts interchangeable with Anschutz 1780 and one-piece mounts between themselves.
Anschutz 1780
The Anschutz 1780 is a bolt-action rifle that is a part of Anschutz’s top range of bore hunting rifles. The rifles listed below will have two-piece scope mounts interchangeable with the Anschutz 1780 mounting surface but will also have one-piece scope mounts interchangeable among themselves because they share the same B distance.
