Skip to content
Home » Real Start Up Time » Hikmicro LYNX LC06 - Real Start Up Time

Hikmicro LYNX LC06 - Real Start Up Time

  • Nina 

You can watch how this device performed below

 

Start Up Time: 7.212 seconds

Ready to Use Time: 11.484 seconds

 

Hikmicro LYNX LC06

Measurements

  Time #1 Time #2 Time #3 Time #4 Time #5 Average Time Standard Deviation
Start up Time 7.21 7.21 7.21 7.19 7.24 7.212 0.0179
Ready To Use Time 11.57 11.50 11.40 11.45 11.50 11.484 0.0635

Hikmicro LYNX LC06 Thermal Imaging Monocular

Hikmicro LYNX LC06 Thermal Imaging Monocular

Our Observations

With Hikmicro LYNX LC06, the user has to long-press the on/off button for 3.30 seconds until the manufacturer’s logo appears. After the logo disappears, we get the image, and the “Start-up” timer stops. Next, the device calibrates, and soon after the icons appear in the top right corner. That’s when the device is ready to be used and the second timer stops.

When measuring the time from the moment your finger presses the button and up to the part where the image appears, we can see that the actual “start-up time" is approximately 7.21 seconds. When the screen first turns on, the device is unresponsive to the user's actions. For that reason, we also measured the "ready to use time", which is the period between the press of the on/off button and the point where the device starts responding to the user’s actions. When the icons appear, the device becomes responsive and is ready to be used. This was at approximately 11.48 seconds.

You can press the zoom button before the device is ready, but it starts working when the display icons appear. The number of times we press the zoom button does not matter; a singular button press is enough for the device to zoom in once it’s ready for use. Therefore we pressed the zoom button in longer intervals.

Hikmicro LYNX LC06 has a built-in battery. This means that you should always check the battery percentage before going into the field, as you cannot change it. To charge the device, you need a type-C charger, which comes in the package. Charging is very easy, as you just plug in the charger, and when the light turns green, the battery is fully charged.

The device is easy to handle, and the buttons are easy to press even if you are wearing gloves.

Hikmicro LYNX Pro LH25 has a Standby option, which is a remarkably useful battery-saving feature. With the press of the on/off button, the screen turns off and the device enters the Standby mode. To use the device again, you simply press the on/off button.

Want to know how long the battery lasts?

Check out the real battery life of this device

 

Similar devices

We noticed that this device appears to be the same as AGM Asp-Micro TM-160 Short Range.

Specifications provided by the Manufacturer

Name Hikmicro LYNX LC06
SKU HM-LC06
Made in China
In production since 2020
Start-up time < 5s
Battery life -10 hours at 25°C (CVBS and Wi-Fi hot spot off) 

-7.5 hours at 25°C (CVBS and Wi-Fi hot spot on)

Battery Type Rechargeable Lithium Battery
Removable battery No

Want to learn more about how this device works?

Leave a Reply

Your email address will not be published.