Skip to content

Diopter Setting in Laser Rangefinding Binoculars | Optics Trade Debates

  • Polona 

Welcome to Optics Trade debates. In each episode, we talk about a different topic and try to answer the most common questions we receive about it. Today, we are going to talk about diopter setting in laser rangefinding binoculars.

We covered the diopter setting on binoculars in general in another segment. Normal binoculars usually have the diopter setting only on one tube, while laser rangefinding binoculars have diopter setting on both tubes.

They are similar to Porro prism binoculars, in the sense that they have the diopter setting separated on each eyepiece, however, they still feature a central focusing knob.

Laser rangefinding binoculars have a display for the reading of the measurement in one of the tubes.

On most rangefinding binoculars, the diopter setting has a red mark for one eye and white for the other. The diopter setting ring which has a white mark works in the same way as on conventional binoculars and is meant to make the object clear. The red diopter setting works on the display.

We would like to thank you for your time. In case we did not answer all the questions regarding this topic, please leave a comment below or send an e-mail to us. If you found this video useful, please subscribe to our channel.

Products mentioned:
LRF binoculars: https://www.optics-trade.eu/en/binoculars/range-finding-binoculars.html

Leave a Reply

Your email address will not be published.