Skip to content

Alpen Optics Rainier 10×42 ED HD Instruction Manual

All Rainier™ binoculars push the limits of optical perfection. All optical components receive our exclusive UBX™ multi-layer coating for maximum light transmission. The extra large BAK-4 roof prisms are coated with over 60 layers of Alpen’s SHR™ metallic and PXA™ phase coatings to deliver the best brightness, clarity, and color fidelity. Large-diameter lens elements throughout the optical system provide an enhanced field of view and eye relief for easy viewing.

PARTS OVERVIEW

Parts
1. Ocular Lens
2. Center Focus
3.Rubber Eyecup
4.Diopter
5. Strap Attachment
6. Objective Lens
7. Tripod Adapter Socket

GENERAL SAFETY INFORMATIONS!

RISK of physical injury!

Never look through this device directly at or near the sun. There is a risk of BLINDING YOURSELF! Children should only use this device under supervision. Keep packaging materials (plastic bags, rubber bands, etc.) away from children. There is a risk of SUFFOCATION.

Fire/Burning RISK!

Never subject the device – especially the lenses – to direct sunlight. Light ray concentration can cause fires and/or burns.

RISK of material damage!

Never take the device apart. Please consult your dealer if there are any defects. The dealer will contact our service centre and send the device in for repair if needed. Do not subject the device to temperatures exceeding 60°C!

Warranty & Service

ALPEN Deluxe Warranty, without an end date, begins on the day of purchase. To benefit from an extended voluntary guarantee period as stated on the gift box, registration on our website is required. You can consult the full warranty terms as well as information on extending the warranty period and details
of our services at: www.alpenoptics.de/warranty_terms.

Eyecup Adjustment

Your ALPEN binocular is fitted with eyecups which can be rolled or twisted up or down (depending on your model) to optimize the view for your eyes and to exclude extraneous light. If you are not wearing eyeglasses or sunglasses, keep the eyecups fully extended („up“ position). If you are wearing glasses, roll down the eyecups or twist them to the down position. This will bring your eyes closer to the binocular’s eyepiece (ocular) lens to ensure you can see the entire image (full field of view with no “cutoff” or “tunnel vision”).

Twisted Eyecup

Rolled Eyecup

IPD (Interpupillary Distance) Adjustment

The distance or spacing between the center of the pupils, called interpupillary distance” (IPD) varies from person to person. To adjust the binocular to match your eyes, follow these simple steps:

  1. . Hold your binocular in the normal viewing position. Grasp each barrel firmly
  2. Move the barrels closer together or further apart until you see a single circular field (don’t worry about focus yet).
  3. Always re-set your binocular to this position before using it.

Diopter Adjustment and Focusing

  1. Adjust eyecups interpupillary distance as described in the previous sections
  2. Set the diopter adjustment ring to zero and view a distant object.
  3. Keep both eyes open at all times.
  4. Using a lens cover or your hand, cover the objective (front) lens of the same side of the binocular that has the diopter adjustment ring. This is usually the right side.
  5. Using the center focus wheel, focus on a distant object with fi ne detail (e.g., brick wall, tree branches, etc.) until it appears as sharp as possible.
  6. Uncover the objective lens on the diopter side, cover the other objective lens, the left side, then view the same object.
  7. Using the diopter adjustment ring, move the diopter adjustment marker to the “+” or “-” till you reach focus. Caution should be used as over turning or forcing the diopter ring can cause damage or cause the eyepiece to break away from the chassis.
  1. Your binocular should now be adjusted for your eyesight. Focusing for any distance can now be done simply by turning the center focus wheel. Make a note of your diopter setting for future reference.

Neckstrap Attachment

To securely attach your binocular to the binocular strap:

  1. Thread the end of the strap from the bottom up through the strap ttachment loop
  2. Hold the buckle and thread the end of the strap inside the buckle
  3. Adjust the overall length and pull the strap webbing tight so it is secure within the buckle.

Waterproof / Fogproof Models

ALPEN binoculars are designed and built utilizing the latest waterproof and fogproof technology (this will be noted on the product packaging). Waterproof models are O-ring sealed for complete moisture protection. Fogproof protection is achieved from dry nitrogen purging that removes all internal moisture.

Tripod Mounting

(tripod and tripod adapter not included) To attach the binocular to a tripod or monopod, unscrew (counter-clockwise) the cap which covers the threaded socket at the far end of the center hinge, and set it aside in a safe place. Use a compatible binocular tripod adapter accessory to attach your binocular to any standard tripod in a horizontal position to provide a stable image during olonged viewing

Care and Cleaning

Your binocular will provide years of trouble-free service if it receives the ormal care you would give anyfine optical instrument.

  • Do not expose non-waterproof models to heavy rain or other excessive oisture. If your binocular has roll-down, flexible eyecups, store it with the eyecups up. This avoids excessive moisture.
  • Avoid sharp impacts. Use the included neckstrap to avoid accidentally ropping the binoculars to prevent mis-alignment of the optics.
  • When not using them, store your binoculars in the provided case in a cool, ry place.
  • Avoid storing the binoculars in hot places, such as the passenger compartment of a vehicle on a hot day. The high temperature could adversely affect the lubricants and sealants. Never leave the binocular where direct sunlight can enter either the objective or the eyepiece lens. Damage may result from the concentration (burning glass effect) of the sun’s rays.
  • All moving parts of the binocular are permanently lubricated. Do not try to lubricate them.

Disposal

Dispose the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or nvironmental authority for information on the proper disposal.

To Clean Your Binoculars Lenses

  1. Blow away any dust or debris on the lens (or use a soft lens brush).
  2. To remove fingerprints or other smears, clean with a soft cotton cloth ubbing in a circular motion. A “microfiber”cleaning cloth (available from camera or computer retailers) is ideal for the routine cleaning of your optics.
  3. For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used. Always apply the fluid to the cleaning cloth – never directly on the lens.

SHARE THIS POST

YOU MIGHT ALSO LIKE

Leave a Reply

Your email address will not be published. Required fields are marked *